[yocto] SATO on Intel DN2800MT

[Chris Tapp]

Hi John,

On 8 May 2014, at 16:25, r10kindsofpeople <r10kindsofpeople at gmail.com> wrote:

> I'm trying to experiment with the SATO build on a DN2800MT with a VGA monitor, but can't seem to get going.  The binaries from Daisy and genericX86 get as far as the Yocto progress bar complete, and then go black.  Any quick hints?

Have a look in the README file for the cedartrail BSP. At the bottom you will find:

Work Around for VGA and LVDS Display issue in PVR driver
--------------------------------------------------------

The PVR driver has a issue that for some systems it causes
it to incorrectly assume that a LVDS display is connected
while infact a VGA display is connected and Vice Versa.
If your VGA or LVDS display does not work with
"cedartrail" MACHINE, then if you have connected a VGA display,
add the following to the kernel command line:

video=LVDS-1:d video=VGA-1:e

<snip>

I suspect it's this. Watch out if you use HDMI as well - the VGA fix seems to break HDMI. On my systems the VGA then works, but the HDMI pauses a lot running the same image! I think you can use similar magic for HDMI (or did I just take it out?).

> I note also that genericX86 looks like a complete Yocto tree rather than just BSP layers.  Am I right, and are there hints on how to combine this with a generic Daisy tree for other processors/projects?
> 
> Yocto_11_0_0/genericx86-daisy-11.0.0/meta-yocto-bsp/recipes-graphics/xorg-xserver/xserver-xf86-config/genericx86/xorg.conf is a zero length file.   ?
> 
> John
> -- 
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Chris Tapp

opensource at keylevel.com
www.keylevel.com