[yocto] u-boot precompiled ?

[Gary Thomas]

On 2014-12-05 05:48, Matthias.Heise at atlas-elektronik.com wrote:
> Hello Matt,
>
> thanks very much for your reply, I was able to create a simple patch changing an u-boot setting as test and “bbappended” it. I just didn’t believe before that the various u-boot
> settings are “hard-coded” but they obviously are in the “<board>.h”, so patching it seems to be the only way for changing settings from within yocto, right?

What U-Boot settings are you asking about?

> *Von:*Matt Schuckmann [mailto:Matt.Schuckmann at planar.com]
> *Gesendet:* Donnerstag, 4. Dezember 2014 18:31
> *An:* Heise, Matthias; yocto at yoctoproject.org
> *Betreff:* RE: u-boot precompiled ?
>
> Mat,
>
> I’m fairly new to OpenEmbedded (4 months now and I still feel like a noobi but I’m trying to give back while the pain is still fresh in my mind)
>
> For something like u-boot it kind of depends on what your changing. If you need to change the u-boot code and the changes are small then typically you’d create a patch f for your
> changes and then make them part of a .bbappend in your layer for the recipe. There are examples on the net for how to create a .bbappend and reference the patch file.
>
> Generally your .bbappend can be as simple as:
>
> FILESEXTRAPATHS_prepend = “:${THISDIR}/files”
>
> SRC_URI += “files://xyzzy.patch”
>
> Where your patches are in subdirectory of your recipe directory.
>
> Remember that generally recipes are about how to obtain the code, build it and package it for distribution, you can do recipes that deal with a pre-built binary but that is
> generally not the case.
>
> Hope this helps,
>
> Matt S.
>
> *From:*yocto-bounces at yoctoproject.org <mailto:yocto-bounces at yoctoproject.org> [mailto:yocto-bounces at yoctoproject.org] *On Behalf Of *Matthias.Heise at atlas-elektronik.com
> <mailto:Matthias.Heise at atlas-elektronik.com>
> *Sent:* Thursday, December 04, 2014 1:49 AM
> *To:* yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>
> *Subject:* Re: [yocto] u-boot precompiled ?
>
> Even if this is a stupid question a little advise would be nice … like “don’t ask so stupid questions, go read this and that” or something… no time ? Should I rather unsubscribe
> from this list until I’m an expert?
>
> *Von:*Heise, Matthias
> *Gesendet:* Mittwoch, 3. Dezember 2014 15:15
> *An:* 'yocto at yoctoproject.org'
> *Betreff:* u-boot precompiled ?
>
> Hi all,
>
> I’m still trying to find out basic things about getting a system up and running. This question is about U-Boot, is it right that for example for my wandboard a pre-compiled *.imx
> is just downloaded ?
>
> So if I want to make settings to U-Boot I make them directly in the source, compile it and re-direct in a recipe to take that new file as bootloader ? Or can I make the settings
> within a recipe and I just didn’t find the spot ?
>
> Thanks for your time,
>
> Regards
>
> Mat
>
>
>

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------