[yocto] raspberry layer

[Paul Barker]

On 5 September 2013 09:08, JC <jc at vtkloud.com> wrote:
> On 05/09/2013 10:04, Paul Barker wrote:
>> The log you've attached shows paths for poky as well as
>> openembedded-core. Poky is basically a combination of
>> openembedded-core, meta-yocto and bitbake so you don't want to add
>> openembedded-core again. Could you post your full bblayers.conf?
>>
>
> Yes that's strange. Do you think it could be an issue with trunk ?
>
> Here's my bblayers:
>

>
> BBLAYERS ?= " \
>   /media/yocto/yocto/poky/meta \
>   /media/yocto/yocto/poky/meta-yocto \
>   /media/yocto/yocto/poky/meta-yocto-bsp \
>   /media/yocto/yocto/meta-openembedded/meta-oe \
>   /media/yocto/yocto/meta-raspberrypi \
>   "
>

In the log you posted is the line:

> ERROR: Failed to parse recipe: /media/yocto/yocto/openembedded-core/meta/recipes-gnome/gdk-pixbuf/gdk-pixbuf_2.28.2.bb

So something was adding the path
/media/yocto/yocto/openembedded-core/meta to BBLAYERS. If you've just
removed that, give it another try.

-- 
Paul Barker

Email: paul at paulbarker.me.uk
http://www.paulbarker.me.uk