[yocto] meta-xilinx

[Edward Vidal]

Hello,
I got the following error.
DEBUG: Executing shell function do_compile
NOTE: make -C
/home/vidal/POKY/build101613_zedboard/poky/build/tmp/sysroots/zedboard-zynq7/usr/src/kernel/tools/perf
O=/home/vidal/POKY/build101613_zedboard/poky/build/tmp/work/zedboard_zynq7-poky-linux-gnueabi/perf/1.0-r8/perf-1.0
CROSS_COMPILE=arm-poky-linux-gnueabi- ARCH=arm
CC=arm-poky-linux-gnueabi-gcc  -march=armv7-a -mthumb-interwork
-mfloat-abi=softfp -mfpu=neon
--sysroot=/home/vidal/POKY/build101613_zedboard/poky/build/tmp/sysroots/zedboard-zynq7
AR=arm-poky-linux-gnueabi-ar perfexecdir=/usr/lib/perf NO_GTK2=1 NO_DWARF=1
prefix=/usr bindir=/usr/bin sharedir=/usr/share sysconfdir=/etc
perfexecdir=/usr/lib/perf/perf-core ETC_PERFCONFIG=../etc sharedir=share
mandir=share/man infodir=share/info all
    CHK -fstack-protector-all
    CHK -Wstack-protector
    CHK -Wvolatile-register-var
    CHK bionic
    CHK libelf
    CHK libdw
make: Entering directory
`/home/vidal/POKY/build101613_zedboard/poky/build/tmp/sysroots/zedboard-zynq7/usr/src/kernel/tools/perf'
Makefile:554: No libdw.h found or old libdw.h found or elfutils is older
than 0.138, disables dwarf support. Please install new
elfutils-devel/libdw-dev
    CHK libunwind
Makefile:570: No libunwind found, disabling post unwind support. Please
install libunwind-dev[el] >= 0.99
I installed libunwind-devel-1.0.1-5.fc18.x86_64
Is this a zedboard-zynq specific error?  Is this an error in building the
kernel?
 I did not see this when building for the beagleboard. I installed
libunwind-devel-1.0.1-5.fc18.x86_64
I removed the package libunwind-devel-1.0.1-5.fc18.x86_64 since nothing
improved with the package installed.
I am in the process of running a clean build after  all repository were
loaded in clean folder.
I appreciate any and all help.
Regards


On Wed, Oct 16, 2013 at 5:06 PM, Edward Vidal <vidal.develone at gmail.com>wrote:

> Hello Khem,
> Thanks for the help after modifying my local.conf
> MACHINE ?= "zedboard-zynq7"
> My build "MACHINE=zedboard-zynq7 bitbake core-image-sato" is in the
> process now 295 of 5076 tasks
> should take a short time to complete.
> regards
>
>
>
> On Wed, Oct 16, 2013 at 4:45 PM, Khem Raj <raj.khem at gmail.com> wrote:
>
>>
>> On Oct 16, 2013, at 2:57 PM, Edward Vidal <vidal.develone at gmail.com>
>> wrote:
>>
>> > Hello,
>> > I built a zedboard core-image-sato on 09/21/13 with meta-xilinx at that
>> time I had the following folders.
>> >
>> > meta-kc705
>> > meta-zc702
>> > meta-zedboard
>> >
>> > Build Configuration:
>> > BB_VERSION        = "1.19.1"
>> > BUILD_SYS         = "x86_64-linux"
>> > NATIVELSBSTRING   = "Fedora-18"
>> > TARGET_SYS        = "arm-poky-linux-gnueabi"
>> > MACHINE           = "zedboard"
>> > DISTRO            = "poky"
>> > DISTRO_VERSION    = "1.4+snapshot-20130921"
>> > TUNE_FEATURES     = " armv7a vfp neon zynq"
>> > TARGET_FPU        = "vfp-neon"
>> > meta
>> > meta-yocto        =
>> "(nobranch):3dee534f1e25109e0bdb681de0746c336f4b8840"
>> > meta-xilinx
>> > meta-kc705
>> > meta-zc702
>> > meta-zedboard     = "master:46f4c79d6d55b556a90bb0fd89c2c09acf2aebff"
>> > meta-yocto-bsp    =
>> "(nobranch):3dee534f1e25109e0bdb681de0746c336f4b8840"
>> >
>> > With the dora release I did a new clone of git://
>> git.yoctoproject.org/meta-xilinx
>> > now I do not see
>> > meta-kc705
>> > meta-zc702
>> > meta-zedboard
>> >
>> > When I execute MACHINE=zedboard bitbake core-image-sato
>> > ERROR:  OE-core's config sanity checker detected a potential
>> misconfiguration.
>> >     Either fix the cause of this error or at your own risk disable the
>> checker (see sanity.conf).
>> >     Following is the list of potential problems / advisories:
>> >
>> >     Please set a valid MACHINE in your local.conf or environment
>> >
>> > ERROR: Execution of event handler 'check_sanity_eventhandler' failed
>> > In my local.conf I have the following.
>> >
>> > MACHINE ?= "zedboard"
>> >
>> > bblayers.conf
>> > # LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
>> > # changes incompatibly
>> > LCONF_VERSION = "6"
>> >
>> > BBPATH = "${TOPDIR}"
>> > BBFILES ?= ""
>> >
>> > BBLAYERS ?= " \
>> >   /home/vidal/POKY/build101613_zedboard/poky/meta \
>> >   /home/vidal/POKY/build101613_zedboard/poky/meta-yocto \
>> >   /home/vidal/POKY/build101613_zedboard/poky/meta-xilinx \
>> >   /home/vidal/POKY/build101613_zedboard/poky/meta-yocto-bsp \
>> >   "
>> > BBLAYERS_NON_REMOVABLE ?= " \
>> >   /home/vidal/POKY/build101613_zedboard/poky/meta \
>> >   /home/vidal/POKY/build101613_zedboard/poky/meta-yocto \
>> >   "
>> > Any help will be appreciated.
>> > Regards
>>
>> it seems like layer went thru some restructuring e.g. see
>> commit d9617006376d73e37f1db17857ee06c24e6b7c03
>> Author: Nathan Rossi <nathan.rossi at xilinx.com>
>> Date:   Fri Aug 2 12:41:14 2013 +1000
>>
>>     meta-*: Remove deprecated sublayers
>>
>>     * The machines supported in the sublayer BSPs are now supported in
>> the base
>>       meta-xilinx layer, these sublayers are no longer required.
>>     * Relevant documentation has also been relocated into
>> meta-xilinx/docs/*.
>>
>>
>>
>> So may be zedboard -> zedboard-zynq7
>>
>>
>> >
>> > _______________________________________________
>> > yocto mailing list
>> > yocto at yoctoproject.org
>> > https://lists.yoctoproject.org/listinfo/yocto
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20131017/2a42ba2a/attachment.html>