[yocto] meta-xilinx

[Edward Vidal]

Hello Khem,
Thanks for the help after modifying my local.conf
MACHINE ?= "zedboard-zynq7"
My build "MACHINE=zedboard-zynq7 bitbake core-image-sato" is in the process
now 295 of 5076 tasks
should take a short time to complete.
regards



On Wed, Oct 16, 2013 at 4:45 PM, Khem Raj <raj.khem at gmail.com> wrote:

>
> On Oct 16, 2013, at 2:57 PM, Edward Vidal <vidal.develone at gmail.com>
> wrote:
>
> > Hello,
> > I built a zedboard core-image-sato on 09/21/13 with meta-xilinx at that
> time I had the following folders.
> >
> > meta-kc705
> > meta-zc702
> > meta-zedboard
> >
> > Build Configuration:
> > BB_VERSION        = "1.19.1"
> > BUILD_SYS         = "x86_64-linux"
> > NATIVELSBSTRING   = "Fedora-18"
> > TARGET_SYS        = "arm-poky-linux-gnueabi"
> > MACHINE           = "zedboard"
> > DISTRO            = "poky"
> > DISTRO_VERSION    = "1.4+snapshot-20130921"
> > TUNE_FEATURES     = " armv7a vfp neon zynq"
> > TARGET_FPU        = "vfp-neon"
> > meta
> > meta-yocto        = "(nobranch):3dee534f1e25109e0bdb681de0746c336f4b8840"
> > meta-xilinx
> > meta-kc705
> > meta-zc702
> > meta-zedboard     = "master:46f4c79d6d55b556a90bb0fd89c2c09acf2aebff"
> > meta-yocto-bsp    = "(nobranch):3dee534f1e25109e0bdb681de0746c336f4b8840"
> >
> > With the dora release I did a new clone of git://
> git.yoctoproject.org/meta-xilinx
> > now I do not see
> > meta-kc705
> > meta-zc702
> > meta-zedboard
> >
> > When I execute MACHINE=zedboard bitbake core-image-sato
> > ERROR:  OE-core's config sanity checker detected a potential
> misconfiguration.
> >     Either fix the cause of this error or at your own risk disable the
> checker (see sanity.conf).
> >     Following is the list of potential problems / advisories:
> >
> >     Please set a valid MACHINE in your local.conf or environment
> >
> > ERROR: Execution of event handler 'check_sanity_eventhandler' failed
> > In my local.conf I have the following.
> >
> > MACHINE ?= "zedboard"
> >
> > bblayers.conf
> > # LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
> > # changes incompatibly
> > LCONF_VERSION = "6"
> >
> > BBPATH = "${TOPDIR}"
> > BBFILES ?= ""
> >
> > BBLAYERS ?= " \
> >   /home/vidal/POKY/build101613_zedboard/poky/meta \
> >   /home/vidal/POKY/build101613_zedboard/poky/meta-yocto \
> >   /home/vidal/POKY/build101613_zedboard/poky/meta-xilinx \
> >   /home/vidal/POKY/build101613_zedboard/poky/meta-yocto-bsp \
> >   "
> > BBLAYERS_NON_REMOVABLE ?= " \
> >   /home/vidal/POKY/build101613_zedboard/poky/meta \
> >   /home/vidal/POKY/build101613_zedboard/poky/meta-yocto \
> >   "
> > Any help will be appreciated.
> > Regards
>
> it seems like layer went thru some restructuring e.g. see
> commit d9617006376d73e37f1db17857ee06c24e6b7c03
> Author: Nathan Rossi <nathan.rossi at xilinx.com>
> Date:   Fri Aug 2 12:41:14 2013 +1000
>
>     meta-*: Remove deprecated sublayers
>
>     * The machines supported in the sublayer BSPs are now supported in the
> base
>       meta-xilinx layer, these sublayers are no longer required.
>     * Relevant documentation has also been relocated into
> meta-xilinx/docs/*.
>
>
>
> So may be zedboard -> zedboard-zynq7
>
>
> >
> > _______________________________________________
> > yocto mailing list
> > yocto at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/yocto
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20131016/52b867ef/attachment.html>