[yocto] Provide sftp-client support in yocto

[Amit Tomer]

Yes Anders, I can see openssh-sftp folder inside  "tmp/work/fkm-poky-linux-
gnueabi/openssh/6.1p1-r3/packages-split".But its empty one.

DISTRO            = "poky"
DISTRO_VERSION    = "1.4.2"

This is taken from build confriguation.

Thanks
Amit.


On Tue, Oct 1, 2013 at 7:37 PM, Anders Darander <anders at chargestorm.se>wrote:

>
>
> Amit Tomer <amittomer25 at gmail.com> wrote:
> >Thansk Anders for your kind response
> >
> >
> >Yes we are created our image and can see there are some IMAGE_INSTALL
> >already used
>
> Good.
>
> >But when I add  IMAGE_INSTALL += "openssh-sftp"
> >
> >
> >Getting below error
> >
> >
> >Error: openssh-sftp not found in the base feeds (zzz_pyp_ii
> >cortexa15hf-vfp-neon cortexa15hf-vfp armv7ahf-vfp-neon armv7ahf-vfp
> >armv6hf-vfp armv5ehf-vfp armv5hf-vfp noarch any all).
> >
> >
> >Do we need to do something more here
>
> That should have been enough.
>
> If you look in
> tmp/work/fkm-poky-linux-gnueabi/openssh/6.1p1-r3/packages-split, do you see
> openssh-sftp there, or which packages do you have there?
>
> Which version of Yocto / Poky are you using? What layers do you have
> enabled?
>
> Cheers,
> Anders
>
> >Thanks
> >
> >Amit
> >
> >
> >
> >
> >
> >On Tue, Oct 1, 2013 at 6:56 PM, Anders Darander <anders at chargestorm.se>
> >wrote:
> >
> >* Amit Tomer <amittomer25 at gmail.com> [131001 14:57]:
> >
> >> Just now I have seen your responses ,didn't get any notification of
> >your
> >> responses on my mail-id.
> >
> >> Let me present my problem again to you guys.
> >
> >> We have stfp-server running fine on put target machine and is running
> >as part
> >> of sshd daemon.
> >
> >Ok, that sounds good. Then the server is apparantly no problem for you.
> >
> >
> >> But when we try to connect to other machine from target board, sftp
> >is not
> >> working becaue our borad is set to run as sftp -client.
> >
> >> An SFTP client program called sftp is already insatlled to tmp/work/
> >> fkm-poky-linux-gnueabi/openssh/6.1p1-r3/package/usr/bin.
> >
> >The build process built sftp (the client) as a part of building
> >openssh.
> >The client was packaged into a separate package, called openssh-sftp.
> >
> >
> >> But on Target I could not find this sftp .bins.
> >
> >Now you need to install that package, openssh-sftp, to your image.
> >
> >If you have created your own image, just add openssh-sftp to
> >IMAGE_INSTALL.
> >
> >If you're not creating your own images, I'd strongly suggest that you
> >do
> >that. (It'll make all your customizations a lot easier in the end). See
> >
> http://www.yoctoproject.org/docs/current/dev-manual/dev-manual.html#usingpoky-extend-customimage-custombb
> >for more information.
> >
> >I hope this answers your question.
> >
> >Cheers,
> >Anders
> >
> >
> >> Now we want this stfp run as some daemon or part of sshd daemon
> >itself.
> >
> >> Anders: It's already being installed to a package named openssh-sftp
> >
> >> We don't have package named openssh-sftp ,we have package named with
> >openssh
> >> only
> >
> >> Thanks
> >> Amit
> >
> >
> >
> >
> >
> >
> >
> >> On Tue, Oct 1, 2013 at 1:22 PM, Amit Tomer <amittomer25 at gmail.com>
> >wrote:
> >
> >>     I am new to OpenEmbedded Yocto project and have a requirement to
> >provide
> >>     sftp-client support on my target board.
> >
> >>     Sftp-server bins are already packed into final image and is
> >installed at
> >
> >>
> >tmp/work/fkm-poky-linux-gnueabi/openssh/6.1p1-r3/package/usr/lib/openssh/
> >>     sftp-server
> >
> >>     Now ,same way Do I have to install stfp client bins also or is
> >there any
> >>     other way to go about it??
> >
> >>     Thanks
> >>     Amit
> >
> >
> >
> >
> >
> >
> >
> >--
> >Anders Darander
> >ChargeStorm AB / eStorm AB
>
> --
> Anders Darander
> ChargeStorm AB          Tel: +46 702 44 84 36
> Laxholmstorget 3        Email: anders at chargestorm.se
> 602 21 Norrköping       Web: www.chargestorm.se
>
> Sent from my Android phone with K-9 Mail. Please excuse my brevity.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20131001/c433f013/attachment.html>