[yocto] Yocto - eclipse ADT plugin , missing autotools dependency

[Thanassis Silis]

Hi Adrian,
well I built the plugin locally, too, using the information from http://www.yoctoproject.org/docs/1.4/dev-manual/dev-manual.html#adt-eclipse .
It is also not very clear to me how the autotools version 3.0.1.xxxxxx is not sufficient for ADT, when the latter requires autotools version 1.1.0. Or do I understand the versioning wrongly?

In any case, I have downloaded Juno and it works like a charm in this case.
I can not get past the configure stage though (in the hello world test applocation). Something is wrong. but it is the topic of another post  (coming right up!)

Thank you for your prompt help!
Thanassis

> From: Adrian.Dudau at enea.com
> To: djnass_18 at hotmail.com
> CC: yocto at yoctoproject.org
> Subject: Re: [yocto] Yocto - eclipse ADT plugin , missing autotools dependency
> Date: Fri, 14 Jun 2013 14:30:42 +0000
> 
> Hi Thanassis,
> 
> On Fri, 2013-06-14 at 14:16 +0000, Thanassis Silis wrote:
> > Hello everyone,
> > I am using ubuntu 12.04, eclipse indigo, and have bitbaked rootfs &
> > toolchain from yocto meta-freescale 'dylan (v1.4.1)'.
> > I then went on to setup eclipse for yocto devel & debug. followed the
> > procedures from : Yocto Project Development Manual  (section
> > 4.2.2.1.3.)
> > 
> > 
> >  
> > 
> > When I try to install the yocto ADT plugin it whines saying that:
> > 
> > 
> >  
> > 
> >         Cannot complete the install because one or more required items
> >         could not be found.
> >           Software being installed: Yocto Project ADT Plug-in
> >         1.4.0.201304182148 (org.yocto.sdk.feature.group
> >         1.4.0.201304182148)
> >           Missing requirement: Yocto Project ADT Plug-in
> >         1.4.0.201304182148 (org.yocto.sdk.feature.group
> >         1.4.0.201304182148) requires 'org.eclipse.cdt.autotools.core
> >         1.1.0' but it could not be found
> > 
> >  
> > 
> >  
> > 
> > 
> It is obvious that the ADT plugin requires a newer version of the
> autotools package.
> 
> > 
> > well the Autotools are definitely installed already, but the version
> > that is stated next to the installed version is "Autotools support for
> > CDT (Incubation)    3.0.1.201202152032"
> > I also built the yocto-eclipse plugin from source and tried installing
> > that too. Same thing happens.
> 
> How did you build the plugins? Against what version of Eclipse? What
> version of CDT?
> > 
> > 
> >  
> > 
> > How can I go about it?
> 
> I'm not sure what is the latest version of CDT for Indigo, but you could
> try updating CDT first and see if that bumps it enough. Alternately, in
> case you didn't do this already, you could try building yocto-plugins
> against your very distribution of Eclipse.
> 
> As a last resort, in case you're not confined to using Indigo, you could
> try downloading Juno and build/install the plugins on that. 
> > 
> > thank you very much for your help!
> > 
> 
> Best regards,
> --Adrian
> > 
> > _______________________________________________
> > yocto mailing list
> > yocto at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/yocto
> 
> 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20130614/0c1f7603/attachment.html>