[yocto] No crosscompiler in Toolchain
DAMARLA Satya Swaroop
satyaswaroop.damarla at gmail.com
Fri Jun 14 04:20:59 PDT 2013
Hi Everyone,
I solved the issue, but I don't know if its right or wrong but for the
moment I am happy... The following didnot work for me
*bitbake core-image-skidata -c populate_sdk*
* *nor
*bitbake meta-toolchain*
*
*
but *bitbake meta-toolchain-sdk * worked for me and created a toolchain
with the crosscompiler... I have no idea why the others didnot create a
toolchain with cross compiler for me. I think this has to be discussed in
more detail..
For now have a wonderful weekend
Warm regards from Austria,
Satya
On Thu, Jun 13, 2013 at 9:16 AM, DAMARLA Satya Swaroop <
satyaswaroop.damarla at gmail.com> wrote:
> Hi,
>
> Any updates on this issue why there is no cross compiler in the toolchain
> we build... I think this is pretty important unfortunately I am not able to
> find the cause.. Help is deeply appreciated..
>
> Greets,
> Satya
>
>
> On Wed, Jun 12, 2013 at 7:12 AM, DAMARLA Satya Swaroop <
> satyaswaroop.damarla at gmail.com> wrote:
>
>> Hi Jessica,
>>
>> By the sentence "No crosscompiler for my target installed in my
>> toolchain", I mean I don't find the binaries for crosscompiling which are
>> usually present in the directory as shown below
>>
>> *damarla at linuxbuildsrv:~/yocto/myToolchain/sysroots/x86_64-pokysdk-linux/usr/bin$
>> ls*
>> *aclocal autoreconf flash2raw.terrier opkg-key
>> pseudolog qemu-mipsel qemu-system-mipsel raw2flash.terrier
>> runqemu-ifup*
>> *aclocal-1.12 autoscan gnu-configize perl
>> qemu-arm qemu-mips.real qemu-system-ppc runqemu
>> runqemu-internal*
>> *autoconf autoupdate ifnames perl5.14.3
>> qemu-ga qemu-nbd qemu-system-x86_64 runqemu-addptable2image
>> tunctl*
>> *autoheader dtc libtoolize perl.real
>> qemu-i386 qemu-ppc qemu-x86_64 runqemu-export-rootfs
>> update-alternatives*
>> *autom4te flash2raw.akita m4 pkg-config
>> qemu-img qemu-system-arm raw2flash.akita runqemu-extract-sdk
>> x86_64-pokysdk-linux-libtool*
>> *automake flash2raw.borzoi oe-find-native-sysroot pseudo
>> qemu-io qemu-system-i386 raw2flash.borzoi runqemu-gen-tapdevs*
>> *automake-1.12 flash2raw.spitz opkg-cl pseudodb
>> qemu-mips qemu-system-mips raw2flash.spitz runqemu-ifdown*
>>
>>
>> I don't have a directory and the list is empty
>>
>> *damarla at linuxbuildsrv:~/yocto/myToolchain/sysroots/x86_64-pokysdk-linux/usr/bin$
>> ls -la| egrep '^d'*
>> *drwxr-xr-x 2 damarla damarla 4096 Jun 11 14:27 .*
>> *drwxr-xr-x 7 damarla damarla 4096 Jun 11 14:15 ..*
>> *
>> *
>> I want to know what could be the potential issue that my toolchain has no
>> crosscompiler for my target
>>
>> Greets,
>> Satya
>>
>>
>> On Tue, Jun 11, 2013 at 9:05 PM, Zhang, Jessica <jessica.zhang at intel.com>wrote:
>>
>>> Hi Satya,****
>>>
>>> ** **
>>>
>>> What is your cross compiler that you said it’s not installed? For
>>> example, on my development host e.g. x86, after I install the toolchain,
>>> there’s an environment-setup-*** file, inside it specifies what is your
>>> cross compiler, e.g. arm-poky-linux-gnueabi-gcc for my case, after I source
>>> the environment file, and do which arm-poky-linux-gnueabi-gcc, I can see
>>> it’s under
>>> path_to_toolchain/sysroots/i686_pokysdk_linux/usr/bin/armv5te-poky-linux-gnueabi/arm-poky-linux-gnueabi-gcc…
>>> so you’re seeing things differently?****
>>>
>>> ** **
>>>
>>> Jessica****
>>>
>>> ** **
>>>
>>> *From:* yocto-bounces at yoctoproject.org [mailto:
>>> yocto-bounces at yoctoproject.org] *On Behalf Of *DAMARLA Satya Swaroop
>>> *Sent:* Tuesday, June 11, 2013 11:55 AM
>>> *To:* Jeff Osier-Mixon; yocto at yoctoproject.org
>>> *Subject:* Re: [yocto] No crosscompiler in Toolchain****
>>>
>>> ** **
>>>
>>> First I am sorry about the Gentlemen.... Next time it would be Ladies &
>>> Gentlemen... ;-)****
>>>
>>> ** **
>>>
>>> Let me explain the situation better ... *core-image-skidata* (arm) is
>>> customized image which I build and I want to build a toolchain for this
>>> image on my x86_64 with should consist of cross compiler (which I assume a
>>> toolchain should contain). The build for the toolchain went successfull but
>>> when I installed the toolchain on my system, I didnot find the
>>> crosscompiler installed...****
>>>
>>> ** **
>>>
>>> Hope you understood my problem..****
>>>
>>> ** **
>>>
>>> Greets,****
>>>
>>> Satya****
>>>
>>> ** **
>>>
>>> On Tue, Jun 11, 2013 at 7:48 PM, Jeff Osier-Mixon <jefro at jefro.net>
>>> wrote:****
>>>
>>> On Tue, Jun 11, 2013 at 5:59 AM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>> > Gentlemen! We have a problem here...****
>>>
>>> Not all here are gentlemen :)****
>>>
>>>
>>> > I compiled the toolchain using the command bitbake core-image-skidata
>>> -c
>>> > populate_sdk and installed the toolchain but I have to tell you that I
>>> dont
>>> > see any cross-compiler installed with the toolchain...
>>> >
>>> > Any guesses what could be the reason.. The image is customized x11
>>> image...****
>>>
>>> I'm not sure I understand. It looks like you are using Host A to build
>>> a toolchain and install it into an image (core-image-skidata) on
>>> Target A. Are you then expecting to use Target A as Host B to compile
>>> for Target B? Is it possible that the skidata image recipe does not
>>> contain the cross-compiler recipes?
>>>
>>> --
>>> Jeff Osier-Mixon http://jefro.net/blog
>>> Yocto Project Community Manager @Intel http://yoctoproject.org****
>>>
>>> ** **
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20130614/0d28264c/attachment.html>
More information about the yocto
mailing list