[yocto] No crosscompiler in Toolchain
DAMARLA Satya Swaroop
satyaswaroop.damarla at gmail.com
Thu Jun 13 00:16:29 PDT 2013
Hi,
Any updates on this issue why there is no cross compiler in the toolchain
we build... I think this is pretty important unfortunately I am not able to
find the cause.. Help is deeply appreciated..
Greets,
Satya
On Wed, Jun 12, 2013 at 7:12 AM, DAMARLA Satya Swaroop <
satyaswaroop.damarla at gmail.com> wrote:
> Hi Jessica,
>
> By the sentence "No crosscompiler for my target installed in my
> toolchain", I mean I don't find the binaries for crosscompiling which are
> usually present in the directory as shown below
>
> *damarla at linuxbuildsrv:~/yocto/myToolchain/sysroots/x86_64-pokysdk-linux/usr/bin$
> ls*
> *aclocal autoreconf flash2raw.terrier opkg-key
> pseudolog qemu-mipsel qemu-system-mipsel raw2flash.terrier
> runqemu-ifup*
> *aclocal-1.12 autoscan gnu-configize perl
> qemu-arm qemu-mips.real qemu-system-ppc runqemu
> runqemu-internal*
> *autoconf autoupdate ifnames perl5.14.3
> qemu-ga qemu-nbd qemu-system-x86_64 runqemu-addptable2image
> tunctl*
> *autoheader dtc libtoolize perl.real
> qemu-i386 qemu-ppc qemu-x86_64 runqemu-export-rootfs
> update-alternatives*
> *autom4te flash2raw.akita m4 pkg-config
> qemu-img qemu-system-arm raw2flash.akita runqemu-extract-sdk
> x86_64-pokysdk-linux-libtool*
> *automake flash2raw.borzoi oe-find-native-sysroot pseudo
> qemu-io qemu-system-i386 raw2flash.borzoi runqemu-gen-tapdevs*
> *automake-1.12 flash2raw.spitz opkg-cl pseudodb
> qemu-mips qemu-system-mips raw2flash.spitz runqemu-ifdown*
>
>
> I don't have a directory and the list is empty
>
> *damarla at linuxbuildsrv:~/yocto/myToolchain/sysroots/x86_64-pokysdk-linux/usr/bin$
> ls -la| egrep '^d'*
> *drwxr-xr-x 2 damarla damarla 4096 Jun 11 14:27 .*
> *drwxr-xr-x 7 damarla damarla 4096 Jun 11 14:15 ..*
> *
> *
> I want to know what could be the potential issue that my toolchain has no
> crosscompiler for my target
>
> Greets,
> Satya
>
>
> On Tue, Jun 11, 2013 at 9:05 PM, Zhang, Jessica <jessica.zhang at intel.com>wrote:
>
>> Hi Satya,****
>>
>> ** **
>>
>> What is your cross compiler that you said it’s not installed? For
>> example, on my development host e.g. x86, after I install the toolchain,
>> there’s an environment-setup-*** file, inside it specifies what is your
>> cross compiler, e.g. arm-poky-linux-gnueabi-gcc for my case, after I source
>> the environment file, and do which arm-poky-linux-gnueabi-gcc, I can see
>> it’s under
>> path_to_toolchain/sysroots/i686_pokysdk_linux/usr/bin/armv5te-poky-linux-gnueabi/arm-poky-linux-gnueabi-gcc…
>> so you’re seeing things differently?****
>>
>> ** **
>>
>> Jessica****
>>
>> ** **
>>
>> *From:* yocto-bounces at yoctoproject.org [mailto:
>> yocto-bounces at yoctoproject.org] *On Behalf Of *DAMARLA Satya Swaroop
>> *Sent:* Tuesday, June 11, 2013 11:55 AM
>> *To:* Jeff Osier-Mixon; yocto at yoctoproject.org
>> *Subject:* Re: [yocto] No crosscompiler in Toolchain****
>>
>> ** **
>>
>> First I am sorry about the Gentlemen.... Next time it would be Ladies &
>> Gentlemen... ;-)****
>>
>> ** **
>>
>> Let me explain the situation better ... *core-image-skidata* (arm) is
>> customized image which I build and I want to build a toolchain for this
>> image on my x86_64 with should consist of cross compiler (which I assume a
>> toolchain should contain). The build for the toolchain went successfull but
>> when I installed the toolchain on my system, I didnot find the
>> crosscompiler installed...****
>>
>> ** **
>>
>> Hope you understood my problem..****
>>
>> ** **
>>
>> Greets,****
>>
>> Satya****
>>
>> ** **
>>
>> On Tue, Jun 11, 2013 at 7:48 PM, Jeff Osier-Mixon <jefro at jefro.net>
>> wrote:****
>>
>> On Tue, Jun 11, 2013 at 5:59 AM, DAMARLA Satya Swaroop
>> <swaroop.damarla at gmail.com> wrote:
>> > Gentlemen! We have a problem here...****
>>
>> Not all here are gentlemen :)****
>>
>>
>> > I compiled the toolchain using the command bitbake core-image-skidata -c
>> > populate_sdk and installed the toolchain but I have to tell you that I
>> dont
>> > see any cross-compiler installed with the toolchain...
>> >
>> > Any guesses what could be the reason.. The image is customized x11
>> image...****
>>
>> I'm not sure I understand. It looks like you are using Host A to build
>> a toolchain and install it into an image (core-image-skidata) on
>> Target A. Are you then expecting to use Target A as Host B to compile
>> for Target B? Is it possible that the skidata image recipe does not
>> contain the cross-compiler recipes?
>>
>> --
>> Jeff Osier-Mixon http://jefro.net/blog
>> Yocto Project Community Manager @Intel http://yoctoproject.org****
>>
>> ** **
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20130613/61fc6117/attachment.html>
More information about the yocto
mailing list