[yocto] Application Development
Hans Beckérus
hans.beckerus at gmail.com
Fri Jun 7 06:44:42 PDT 2013
On Fri, Jun 7, 2013 at 3:40 PM, Hans Beckérus <hans.beckerus at gmail.com> wrote:
> On Fri, Jun 7, 2013 at 3:34 PM, Gary Thomas <gary at mlbassoc.com> wrote:
>> On 2013-06-07 07:10, Hans Beckérus wrote:
>>>
>>> On Fri, Jun 7, 2013 at 9:10 AM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>>
>>>> SHould we install development and debigging pacakages in the images when
>>>> we
>>>> want to build a toolchain.. I mean this
>>>>
>>>> "dbg-pkgs" - add -dbg packages for all installed packages
>>>> # (adds symbol information for debugging/profiling)
>>>> # "dev-pkgs" - add -dev packages for all installed packages
>>>> # (useful if you want to develop against libs in the
>>>> image)
>>>>
>>>>
>>>> Greets,
>>>> Satya
>>>>
>>> I actually tried the 'bitbake <image> -c populate-sdk but it fails :(
>>> Any clues to what make things go wrong this time? Nothing provides
>>> meta-environment-arm??
>>
>>
>> Do you have "tools-sdk" set in your IMAGE_FEATURES?
>>
> Actually no. I did not find a reference of it in the ADT documentation
> so I did not know it was required.
> It will try again.
>
>
Whoooo. tools-sdk seems to drag in a complete X11 environment! I do
not want that :(
Is there some more lean approach to this I can take? ;)
>>>
>>> | Note: adding Smart channel x86_64_nativesdk (25)
>>> |
>>> |
>>> | Note: adding Smart channel all (10)
>>> |
>>> |
>>> | Note: configuring RPM cross-install scriptlet_wrapper
>>> |
>>> | Updating cache...
>>> ######################################## [100%]
>>> |
>>> | Saving cache...
>>> |
>>> | Note: adding Smart RPM DB channel
>>> |
>>> | Note: to be installed: nativesdk-packagegroup-sdk-host at all
>>> packagegroup-cross-canadian-arm at all
>>> | Loading cache...
>>> | Updating cache...
>>> ######################################## [100%]
>>> |
>>> | Computing transaction...error: Can't install
>>> packagegroup-cross-canadian-arm-1.0-r0 at all: no package provides
>>> meta-environment-arm
>>> |
>>> | Saving cache...
>>> |
>>> | DEBUG: Python function do_populate_sdk finished
>>>
>>>
>>>
>>>
>>>>
>>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>>> <swaroop.damarla at gmail.com> wrote:
>>>>>
>>>>>
>>>>> Hi Jessica & Philip,
>>>>>
>>>>> I have an issue... This is such a long error ... I even did a fresh
>>>>> build
>>>>> by deleting the "tmp" directory. The image build went very well but the
>>>>> toolchain is always giving me a error...
>>>>>
>>>>> | Selecting previously unselected package xz-dev.
>>>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>>> | The following package disappeared from your system as
>>>>> | all files have been overwritten by other packages:
>>>>> | avahi
>>>>> | log_check: Using
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> as logfile
>>>>> | Logfile is clean
>>>>> | Installing NATIVESDK packages
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ Release.gpg
>>>>> | Ign file: ./ Release.gpg
>>>>> | Get:1 file: ./ Release [24 B]
>>>>> | Get:2 file: ./ Release [11 B]
>>>>> | Ign file: ./ Translation-en
>>>>> | Ign file: ./ Translation-en
>>>>> | Reading package lists...
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | Reading package lists...
>>>>> | Building dependency tree...
>>>>> | Reading state information...
>>>>> | Some packages could not be installed. This may mean that you have
>>>>> | requested an impossible situation or if you are using the unstable
>>>>> | distribution that some required packages have not yet been created
>>>>> | or been moved out of Incoming.
>>>>> | The following information may help to resolve the situation:
>>>>> |
>>>>> | The following packages have unmet dependencies:
>>>>> | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: gcc-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: meta-environment-arm but
>>>>> it
>>>>> is not installable
>>>>> | Depends:
>>>>> binutils-cross-canadian-arm
>>>>> but it is not installable
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | E: Unable to correct problems, you have held broken packages.
>>>>> | DEBUG: Python function do_populate_sdk finished
>>>>> | ERROR: Function failed: populate_sdk_image (see
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> for further information)
>>>>> ERROR: Task 10
>>>>>
>>>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk) failed with exit code '1'
>>>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>>>> be
>>>>> rerun and 1 failed.
>>>>>
>>>>> Summary: 1 task failed:
>>>>>
>>>>>
>>>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk
>>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>>> code.
>>>>>
>>>>> I am not able to install those packages as they say there are no
>>>>> installation candidate for them...
>>>>>
>>>>>
>>>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zhang at intel.com>
>>>>> wrote:
>>>>>>
>>>>>>
>>>>>> Hi Satya,
>>>>>>
>>>>>>
>>>>>>
>>>>>> Use bitbake image-name –c populate_sdk, this allows you to create a
>>>>>> toolchain with sysroot that match your target image that allows you to
>>>>>> develop app against…
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Jessica
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: yocto-bounces at yoctoproject.org
>>>>>> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Satya Swaroop
>>>>>> Damarla
>>>>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>>>>> To: yocto at yoctoproject.org
>>>>>> Subject: [yocto] Application Development
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hi Guys,
>>>>>>
>>>>>>
>>>>>>
>>>>>> I have an issue... I created a custom image based on NVIDIA Tegra2 with
>>>>>> a
>>>>>> custom kernel. I installed packages specific Tegra board and
>>>>>> application
>>>>>> specific. Now we want to send the baord and the new linux image for
>>>>>> application development...
>>>>>>
>>>>>>
>>>>>>
>>>>>> As I went through ADT manual, I only found qemu based toolchains but I
>>>>>> want to create toolchain based on my rootfs and kernel... so that the
>>>>>> development team can develop a voip application for the board... I am
>>>>>> kind
>>>>>> of stuck how to proceed in this issue...
>>>>>>
>>>>>>
>>>>>>
>>>>>> I really need a small way out and hopefully I will catch things
>>>>>> automatically..
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Satya
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> yocto mailing list
>>>> yocto at yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>
>>>
>>> On Fri, Jun 7, 2013 at 9:10 AM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>>
>>>> SHould we install development and debigging pacakages in the images when
>>>> we
>>>> want to build a toolchain.. I mean this
>>>>
>>>> "dbg-pkgs" - add -dbg packages for all installed packages
>>>> # (adds symbol information for debugging/profiling)
>>>> # "dev-pkgs" - add -dev packages for all installed packages
>>>> # (useful if you want to develop against libs in the
>>>> image)
>>>>
>>>>
>>>> Greets,
>>>> Satya
>>>>
>>>>
>>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>>> <swaroop.damarla at gmail.com> wrote:
>>>>>
>>>>>
>>>>> Hi Jessica & Philip,
>>>>>
>>>>> I have an issue... This is such a long error ... I even did a fresh
>>>>> build
>>>>> by deleting the "tmp" directory. The image build went very well but the
>>>>> toolchain is always giving me a error...
>>>>>
>>>>> | Selecting previously unselected package xz-dev.
>>>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>>> | The following package disappeared from your system as
>>>>> | all files have been overwritten by other packages:
>>>>> | avahi
>>>>> | log_check: Using
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> as logfile
>>>>> | Logfile is clean
>>>>> | Installing NATIVESDK packages
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ Release.gpg
>>>>> | Ign file: ./ Release.gpg
>>>>> | Get:1 file: ./ Release [24 B]
>>>>> | Get:2 file: ./ Release [11 B]
>>>>> | Ign file: ./ Translation-en
>>>>> | Ign file: ./ Translation-en
>>>>> | Reading package lists...
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | Reading package lists...
>>>>> | Building dependency tree...
>>>>> | Reading state information...
>>>>> | Some packages could not be installed. This may mean that you have
>>>>> | requested an impossible situation or if you are using the unstable
>>>>> | distribution that some required packages have not yet been created
>>>>> | or been moved out of Incoming.
>>>>> | The following information may help to resolve the situation:
>>>>> |
>>>>> | The following packages have unmet dependencies:
>>>>> | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: gcc-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: meta-environment-arm but
>>>>> it
>>>>> is not installable
>>>>> | Depends:
>>>>> binutils-cross-canadian-arm
>>>>> but it is not installable
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | E: Unable to correct problems, you have held broken packages.
>>>>> | DEBUG: Python function do_populate_sdk finished
>>>>> | ERROR: Function failed: populate_sdk_image (see
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> for further information)
>>>>> ERROR: Task 10
>>>>>
>>>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk) failed with exit code '1'
>>>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>>>> be
>>>>> rerun and 1 failed.
>>>>>
>>>>> Summary: 1 task failed:
>>>>>
>>>>>
>>>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk
>>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>>> code.
>>>>>
>>>>> I am not able to install those packages as they say there are no
>>>>> installation candidate for them...
>>>>>
>>>>>
>>>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zhang at intel.com>
>>>>> wrote:
>>>>>>
>>>>>>
>>>>>> Hi Satya,
>>>>>>
>>>>>>
>>>>>>
>>>>>> Use bitbake image-name –c populate_sdk, this allows you to create a
>>>>>> toolchain with sysroot that match your target image that allows you to
>>>>>> develop app against…
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Jessica
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: yocto-bounces at yoctoproject.org
>>>>>> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Satya Swaroop
>>>>>> Damarla
>>>>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>>>>> To: yocto at yoctoproject.org
>>>>>> Subject: [yocto] Application Development
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hi Guys,
>>>>>>
>>>>>>
>>>>>>
>>>>>> I have an issue... I created a custom image based on NVIDIA Tegra2 with
>>>>>> a
>>>>>> custom kernel. I installed packages specific Tegra board and
>>>>>> application
>>>>>> specific. Now we want to send the baord and the new linux image for
>>>>>> application development...
>>>>>>
>>>>>>
>>>>>>
>>>>>> As I went through ADT manual, I only found qemu based toolchains but I
>>>>>> want to create toolchain based on my rootfs and kernel... so that the
>>>>>> development team can develop a voip application for the board... I am
>>>>>> kind
>>>>>> of stuck how to proceed in this issue...
>>>>>>
>>>>>>
>>>>>>
>>>>>> I really need a small way out and hopefully I will catch things
>>>>>> automatically..
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Satya
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> yocto mailing list
>>>> yocto at yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas | Consulting for the
>> MLB Associates | Embedded world
>> ------------------------------------------------------------
>>
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>
>
> On Fri, Jun 7, 2013 at 3:34 PM, Gary Thomas <gary at mlbassoc.com> wrote:
>> On 2013-06-07 07:10, Hans Beckérus wrote:
>>>
>>> On Fri, Jun 7, 2013 at 9:10 AM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>>
>>>> SHould we install development and debigging pacakages in the images when
>>>> we
>>>> want to build a toolchain.. I mean this
>>>>
>>>> "dbg-pkgs" - add -dbg packages for all installed packages
>>>> # (adds symbol information for debugging/profiling)
>>>> # "dev-pkgs" - add -dev packages for all installed packages
>>>> # (useful if you want to develop against libs in the
>>>> image)
>>>>
>>>>
>>>> Greets,
>>>> Satya
>>>>
>>> I actually tried the 'bitbake <image> -c populate-sdk but it fails :(
>>> Any clues to what make things go wrong this time? Nothing provides
>>> meta-environment-arm??
>>
>>
>> Do you have "tools-sdk" set in your IMAGE_FEATURES?
>>
>>
>>>
>>> Hans
>>>
>>> | Note: adding Smart channel x86_64_nativesdk (25)
>>> |
>>> |
>>> | Note: adding Smart channel all (10)
>>> |
>>> |
>>> | Note: configuring RPM cross-install scriptlet_wrapper
>>> |
>>> | Updating cache...
>>> ######################################## [100%]
>>> |
>>> | Saving cache...
>>> |
>>> | Note: adding Smart RPM DB channel
>>> |
>>> | Note: to be installed: nativesdk-packagegroup-sdk-host at all
>>> packagegroup-cross-canadian-arm at all
>>> | Loading cache...
>>> | Updating cache...
>>> ######################################## [100%]
>>> |
>>> | Computing transaction...error: Can't install
>>> packagegroup-cross-canadian-arm-1.0-r0 at all: no package provides
>>> meta-environment-arm
>>> |
>>> | Saving cache...
>>> |
>>> | DEBUG: Python function do_populate_sdk finished
>>>
>>>
>>>
>>>
>>>>
>>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>>> <swaroop.damarla at gmail.com> wrote:
>>>>>
>>>>>
>>>>> Hi Jessica & Philip,
>>>>>
>>>>> I have an issue... This is such a long error ... I even did a fresh
>>>>> build
>>>>> by deleting the "tmp" directory. The image build went very well but the
>>>>> toolchain is always giving me a error...
>>>>>
>>>>> | Selecting previously unselected package xz-dev.
>>>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>>> | The following package disappeared from your system as
>>>>> | all files have been overwritten by other packages:
>>>>> | avahi
>>>>> | log_check: Using
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> as logfile
>>>>> | Logfile is clean
>>>>> | Installing NATIVESDK packages
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ Release.gpg
>>>>> | Ign file: ./ Release.gpg
>>>>> | Get:1 file: ./ Release [24 B]
>>>>> | Get:2 file: ./ Release [11 B]
>>>>> | Ign file: ./ Translation-en
>>>>> | Ign file: ./ Translation-en
>>>>> | Reading package lists...
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | Reading package lists...
>>>>> | Building dependency tree...
>>>>> | Reading state information...
>>>>> | Some packages could not be installed. This may mean that you have
>>>>> | requested an impossible situation or if you are using the unstable
>>>>> | distribution that some required packages have not yet been created
>>>>> | or been moved out of Incoming.
>>>>> | The following information may help to resolve the situation:
>>>>> |
>>>>> | The following packages have unmet dependencies:
>>>>> | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: gcc-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: meta-environment-arm but
>>>>> it
>>>>> is not installable
>>>>> | Depends:
>>>>> binutils-cross-canadian-arm
>>>>> but it is not installable
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | E: Unable to correct problems, you have held broken packages.
>>>>> | DEBUG: Python function do_populate_sdk finished
>>>>> | ERROR: Function failed: populate_sdk_image (see
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> for further information)
>>>>> ERROR: Task 10
>>>>>
>>>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk) failed with exit code '1'
>>>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>>>> be
>>>>> rerun and 1 failed.
>>>>>
>>>>> Summary: 1 task failed:
>>>>>
>>>>>
>>>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk
>>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>>> code.
>>>>>
>>>>> I am not able to install those packages as they say there are no
>>>>> installation candidate for them...
>>>>>
>>>>>
>>>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zhang at intel.com>
>>>>> wrote:
>>>>>>
>>>>>>
>>>>>> Hi Satya,
>>>>>>
>>>>>>
>>>>>>
>>>>>> Use bitbake image-name –c populate_sdk, this allows you to create a
>>>>>> toolchain with sysroot that match your target image that allows you to
>>>>>> develop app against…
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Jessica
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: yocto-bounces at yoctoproject.org
>>>>>> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Satya Swaroop
>>>>>> Damarla
>>>>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>>>>> To: yocto at yoctoproject.org
>>>>>> Subject: [yocto] Application Development
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hi Guys,
>>>>>>
>>>>>>
>>>>>>
>>>>>> I have an issue... I created a custom image based on NVIDIA Tegra2 with
>>>>>> a
>>>>>> custom kernel. I installed packages specific Tegra board and
>>>>>> application
>>>>>> specific. Now we want to send the baord and the new linux image for
>>>>>> application development...
>>>>>>
>>>>>>
>>>>>>
>>>>>> As I went through ADT manual, I only found qemu based toolchains but I
>>>>>> want to create toolchain based on my rootfs and kernel... so that the
>>>>>> development team can develop a voip application for the board... I am
>>>>>> kind
>>>>>> of stuck how to proceed in this issue...
>>>>>>
>>>>>>
>>>>>>
>>>>>> I really need a small way out and hopefully I will catch things
>>>>>> automatically..
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Satya
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> yocto mailing list
>>>> yocto at yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>
>>>
>>> On Fri, Jun 7, 2013 at 9:10 AM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>>
>>>> SHould we install development and debigging pacakages in the images when
>>>> we
>>>> want to build a toolchain.. I mean this
>>>>
>>>> "dbg-pkgs" - add -dbg packages for all installed packages
>>>> # (adds symbol information for debugging/profiling)
>>>> # "dev-pkgs" - add -dev packages for all installed packages
>>>> # (useful if you want to develop against libs in the
>>>> image)
>>>>
>>>>
>>>> Greets,
>>>> Satya
>>>>
>>>>
>>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>>> <swaroop.damarla at gmail.com> wrote:
>>>>>
>>>>>
>>>>> Hi Jessica & Philip,
>>>>>
>>>>> I have an issue... This is such a long error ... I even did a fresh
>>>>> build
>>>>> by deleting the "tmp" directory. The image build went very well but the
>>>>> toolchain is always giving me a error...
>>>>>
>>>>> | Selecting previously unselected package xz-dev.
>>>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>>> | The following package disappeared from your system as
>>>>> | all files have been overwritten by other packages:
>>>>> | avahi
>>>>> | log_check: Using
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> as logfile
>>>>> | Logfile is clean
>>>>> | Installing NATIVESDK packages
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ Release.gpg
>>>>> | Ign file: ./ Release.gpg
>>>>> | Get:1 file: ./ Release [24 B]
>>>>> | Get:2 file: ./ Release [11 B]
>>>>> | Ign file: ./ Translation-en
>>>>> | Ign file: ./ Translation-en
>>>>> | Reading package lists...
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | Reading package lists...
>>>>> | Building dependency tree...
>>>>> | Reading state information...
>>>>> | Some packages could not be installed. This may mean that you have
>>>>> | requested an impossible situation or if you are using the unstable
>>>>> | distribution that some required packages have not yet been created
>>>>> | or been moved out of Incoming.
>>>>> | The following information may help to resolve the situation:
>>>>> |
>>>>> | The following packages have unmet dependencies:
>>>>> | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: gcc-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: meta-environment-arm but
>>>>> it
>>>>> is not installable
>>>>> | Depends:
>>>>> binutils-cross-canadian-arm
>>>>> but it is not installable
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | E: Unable to correct problems, you have held broken packages.
>>>>> | DEBUG: Python function do_populate_sdk finished
>>>>> | ERROR: Function failed: populate_sdk_image (see
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> for further information)
>>>>> ERROR: Task 10
>>>>>
>>>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk) failed with exit code '1'
>>>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>>>> be
>>>>> rerun and 1 failed.
>>>>>
>>>>> Summary: 1 task failed:
>>>>>
>>>>>
>>>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk
>>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>>> code.
>>>>>
>>>>> I am not able to install those packages as they say there are no
>>>>> installation candidate for them...
>>>>>
>>>>>
>>>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zhang at intel.com>
>>>>> wrote:
>>>>>>
>>>>>>
>>>>>> Hi Satya,
>>>>>>
>>>>>>
>>>>>>
>>>>>> Use bitbake image-name –c populate_sdk, this allows you to create a
>>>>>> toolchain with sysroot that match your target image that allows you to
>>>>>> develop app against…
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Jessica
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: yocto-bounces at yoctoproject.org
>>>>>> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Satya Swaroop
>>>>>> Damarla
>>>>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>>>>> To: yocto at yoctoproject.org
>>>>>> Subject: [yocto] Application Development
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hi Guys,
>>>>>>
>>>>>>
>>>>>>
>>>>>> I have an issue... I created a custom image based on NVIDIA Tegra2 with
>>>>>> a
>>>>>> custom kernel. I installed packages specific Tegra board and
>>>>>> application
>>>>>> specific. Now we want to send the baord and the new linux image for
>>>>>> application development...
>>>>>>
>>>>>>
>>>>>>
>>>>>> As I went through ADT manual, I only found qemu based toolchains but I
>>>>>> want to create toolchain based on my rootfs and kernel... so that the
>>>>>> development team can develop a voip application for the board... I am
>>>>>> kind
>>>>>> of stuck how to proceed in this issue...
>>>>>>
>>>>>>
>>>>>>
>>>>>> I really need a small way out and hopefully I will catch things
>>>>>> automatically..
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Satya
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> yocto mailing list
>>>> yocto at yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas | Consulting for the
>> MLB Associates | Embedded world
>> ------------------------------------------------------------
>>
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
On Fri, Jun 7, 2013 at 3:40 PM, Hans Beckérus <hans.beckerus at gmail.com> wrote:
> On Fri, Jun 7, 2013 at 3:34 PM, Gary Thomas <gary at mlbassoc.com> wrote:
>> On 2013-06-07 07:10, Hans Beckérus wrote:
>>>
>>> On Fri, Jun 7, 2013 at 9:10 AM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>>
>>>> SHould we install development and debigging pacakages in the images when
>>>> we
>>>> want to build a toolchain.. I mean this
>>>>
>>>> "dbg-pkgs" - add -dbg packages for all installed packages
>>>> # (adds symbol information for debugging/profiling)
>>>> # "dev-pkgs" - add -dev packages for all installed packages
>>>> # (useful if you want to develop against libs in the
>>>> image)
>>>>
>>>>
>>>> Greets,
>>>> Satya
>>>>
>>> I actually tried the 'bitbake <image> -c populate-sdk but it fails :(
>>> Any clues to what make things go wrong this time? Nothing provides
>>> meta-environment-arm??
>>
>>
>> Do you have "tools-sdk" set in your IMAGE_FEATURES?
>>
> Actually no. I did not find a reference of it in the ADT documentation
> so I did not know it was required.
> It will try again.
>
>
>>>
>>> | Note: adding Smart channel x86_64_nativesdk (25)
>>> |
>>> |
>>> | Note: adding Smart channel all (10)
>>> |
>>> |
>>> | Note: configuring RPM cross-install scriptlet_wrapper
>>> |
>>> | Updating cache...
>>> ######################################## [100%]
>>> |
>>> | Saving cache...
>>> |
>>> | Note: adding Smart RPM DB channel
>>> |
>>> | Note: to be installed: nativesdk-packagegroup-sdk-host at all
>>> packagegroup-cross-canadian-arm at all
>>> | Loading cache...
>>> | Updating cache...
>>> ######################################## [100%]
>>> |
>>> | Computing transaction...error: Can't install
>>> packagegroup-cross-canadian-arm-1.0-r0 at all: no package provides
>>> meta-environment-arm
>>> |
>>> | Saving cache...
>>> |
>>> | DEBUG: Python function do_populate_sdk finished
>>>
>>>
>>>
>>>
>>>>
>>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>>> <swaroop.damarla at gmail.com> wrote:
>>>>>
>>>>>
>>>>> Hi Jessica & Philip,
>>>>>
>>>>> I have an issue... This is such a long error ... I even did a fresh
>>>>> build
>>>>> by deleting the "tmp" directory. The image build went very well but the
>>>>> toolchain is always giving me a error...
>>>>>
>>>>> | Selecting previously unselected package xz-dev.
>>>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>>> | The following package disappeared from your system as
>>>>> | all files have been overwritten by other packages:
>>>>> | avahi
>>>>> | log_check: Using
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> as logfile
>>>>> | Logfile is clean
>>>>> | Installing NATIVESDK packages
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ Release.gpg
>>>>> | Ign file: ./ Release.gpg
>>>>> | Get:1 file: ./ Release [24 B]
>>>>> | Get:2 file: ./ Release [11 B]
>>>>> | Ign file: ./ Translation-en
>>>>> | Ign file: ./ Translation-en
>>>>> | Reading package lists...
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | Reading package lists...
>>>>> | Building dependency tree...
>>>>> | Reading state information...
>>>>> | Some packages could not be installed. This may mean that you have
>>>>> | requested an impossible situation or if you are using the unstable
>>>>> | distribution that some required packages have not yet been created
>>>>> | or been moved out of Incoming.
>>>>> | The following information may help to resolve the situation:
>>>>> |
>>>>> | The following packages have unmet dependencies:
>>>>> | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: gcc-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: meta-environment-arm but
>>>>> it
>>>>> is not installable
>>>>> | Depends:
>>>>> binutils-cross-canadian-arm
>>>>> but it is not installable
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | E: Unable to correct problems, you have held broken packages.
>>>>> | DEBUG: Python function do_populate_sdk finished
>>>>> | ERROR: Function failed: populate_sdk_image (see
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> for further information)
>>>>> ERROR: Task 10
>>>>>
>>>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk) failed with exit code '1'
>>>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>>>> be
>>>>> rerun and 1 failed.
>>>>>
>>>>> Summary: 1 task failed:
>>>>>
>>>>>
>>>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk
>>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>>> code.
>>>>>
>>>>> I am not able to install those packages as they say there are no
>>>>> installation candidate for them...
>>>>>
>>>>>
>>>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zhang at intel.com>
>>>>> wrote:
>>>>>>
>>>>>>
>>>>>> Hi Satya,
>>>>>>
>>>>>>
>>>>>>
>>>>>> Use bitbake image-name –c populate_sdk, this allows you to create a
>>>>>> toolchain with sysroot that match your target image that allows you to
>>>>>> develop app against…
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Jessica
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: yocto-bounces at yoctoproject.org
>>>>>> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Satya Swaroop
>>>>>> Damarla
>>>>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>>>>> To: yocto at yoctoproject.org
>>>>>> Subject: [yocto] Application Development
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hi Guys,
>>>>>>
>>>>>>
>>>>>>
>>>>>> I have an issue... I created a custom image based on NVIDIA Tegra2 with
>>>>>> a
>>>>>> custom kernel. I installed packages specific Tegra board and
>>>>>> application
>>>>>> specific. Now we want to send the baord and the new linux image for
>>>>>> application development...
>>>>>>
>>>>>>
>>>>>>
>>>>>> As I went through ADT manual, I only found qemu based toolchains but I
>>>>>> want to create toolchain based on my rootfs and kernel... so that the
>>>>>> development team can develop a voip application for the board... I am
>>>>>> kind
>>>>>> of stuck how to proceed in this issue...
>>>>>>
>>>>>>
>>>>>>
>>>>>> I really need a small way out and hopefully I will catch things
>>>>>> automatically..
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Satya
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> yocto mailing list
>>>> yocto at yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>
>>>
>>> On Fri, Jun 7, 2013 at 9:10 AM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>>
>>>> SHould we install development and debigging pacakages in the images when
>>>> we
>>>> want to build a toolchain.. I mean this
>>>>
>>>> "dbg-pkgs" - add -dbg packages for all installed packages
>>>> # (adds symbol information for debugging/profiling)
>>>> # "dev-pkgs" - add -dev packages for all installed packages
>>>> # (useful if you want to develop against libs in the
>>>> image)
>>>>
>>>>
>>>> Greets,
>>>> Satya
>>>>
>>>>
>>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>>> <swaroop.damarla at gmail.com> wrote:
>>>>>
>>>>>
>>>>> Hi Jessica & Philip,
>>>>>
>>>>> I have an issue... This is such a long error ... I even did a fresh
>>>>> build
>>>>> by deleting the "tmp" directory. The image build went very well but the
>>>>> toolchain is always giving me a error...
>>>>>
>>>>> | Selecting previously unselected package xz-dev.
>>>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>>> | The following package disappeared from your system as
>>>>> | all files have been overwritten by other packages:
>>>>> | avahi
>>>>> | log_check: Using
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> as logfile
>>>>> | Logfile is clean
>>>>> | Installing NATIVESDK packages
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ Release.gpg
>>>>> | Ign file: ./ Release.gpg
>>>>> | Get:1 file: ./ Release [24 B]
>>>>> | Get:2 file: ./ Release [11 B]
>>>>> | Ign file: ./ Translation-en
>>>>> | Ign file: ./ Translation-en
>>>>> | Reading package lists...
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | Reading package lists...
>>>>> | Building dependency tree...
>>>>> | Reading state information...
>>>>> | Some packages could not be installed. This may mean that you have
>>>>> | requested an impossible situation or if you are using the unstable
>>>>> | distribution that some required packages have not yet been created
>>>>> | or been moved out of Incoming.
>>>>> | The following information may help to resolve the situation:
>>>>> |
>>>>> | The following packages have unmet dependencies:
>>>>> | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: gcc-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: meta-environment-arm but
>>>>> it
>>>>> is not installable
>>>>> | Depends:
>>>>> binutils-cross-canadian-arm
>>>>> but it is not installable
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | E: Unable to correct problems, you have held broken packages.
>>>>> | DEBUG: Python function do_populate_sdk finished
>>>>> | ERROR: Function failed: populate_sdk_image (see
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> for further information)
>>>>> ERROR: Task 10
>>>>>
>>>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk) failed with exit code '1'
>>>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>>>> be
>>>>> rerun and 1 failed.
>>>>>
>>>>> Summary: 1 task failed:
>>>>>
>>>>>
>>>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk
>>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>>> code.
>>>>>
>>>>> I am not able to install those packages as they say there are no
>>>>> installation candidate for them...
>>>>>
>>>>>
>>>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zhang at intel.com>
>>>>> wrote:
>>>>>>
>>>>>>
>>>>>> Hi Satya,
>>>>>>
>>>>>>
>>>>>>
>>>>>> Use bitbake image-name –c populate_sdk, this allows you to create a
>>>>>> toolchain with sysroot that match your target image that allows you to
>>>>>> develop app against…
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Jessica
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: yocto-bounces at yoctoproject.org
>>>>>> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Satya Swaroop
>>>>>> Damarla
>>>>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>>>>> To: yocto at yoctoproject.org
>>>>>> Subject: [yocto] Application Development
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hi Guys,
>>>>>>
>>>>>>
>>>>>>
>>>>>> I have an issue... I created a custom image based on NVIDIA Tegra2 with
>>>>>> a
>>>>>> custom kernel. I installed packages specific Tegra board and
>>>>>> application
>>>>>> specific. Now we want to send the baord and the new linux image for
>>>>>> application development...
>>>>>>
>>>>>>
>>>>>>
>>>>>> As I went through ADT manual, I only found qemu based toolchains but I
>>>>>> want to create toolchain based on my rootfs and kernel... so that the
>>>>>> development team can develop a voip application for the board... I am
>>>>>> kind
>>>>>> of stuck how to proceed in this issue...
>>>>>>
>>>>>>
>>>>>>
>>>>>> I really need a small way out and hopefully I will catch things
>>>>>> automatically..
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Satya
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> yocto mailing list
>>>> yocto at yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas | Consulting for the
>> MLB Associates | Embedded world
>> ------------------------------------------------------------
>>
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>
>
> On Fri, Jun 7, 2013 at 3:34 PM, Gary Thomas <gary at mlbassoc.com> wrote:
>> On 2013-06-07 07:10, Hans Beckérus wrote:
>>>
>>> On Fri, Jun 7, 2013 at 9:10 AM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>>
>>>> SHould we install development and debigging pacakages in the images when
>>>> we
>>>> want to build a toolchain.. I mean this
>>>>
>>>> "dbg-pkgs" - add -dbg packages for all installed packages
>>>> # (adds symbol information for debugging/profiling)
>>>> # "dev-pkgs" - add -dev packages for all installed packages
>>>> # (useful if you want to develop against libs in the
>>>> image)
>>>>
>>>>
>>>> Greets,
>>>> Satya
>>>>
>>> I actually tried the 'bitbake <image> -c populate-sdk but it fails :(
>>> Any clues to what make things go wrong this time? Nothing provides
>>> meta-environment-arm??
>>
>>
>> Do you have "tools-sdk" set in your IMAGE_FEATURES?
>>
>>
>>>
>>> Hans
>>>
>>> | Note: adding Smart channel x86_64_nativesdk (25)
>>> |
>>> |
>>> | Note: adding Smart channel all (10)
>>> |
>>> |
>>> | Note: configuring RPM cross-install scriptlet_wrapper
>>> |
>>> | Updating cache...
>>> ######################################## [100%]
>>> |
>>> | Saving cache...
>>> |
>>> | Note: adding Smart RPM DB channel
>>> |
>>> | Note: to be installed: nativesdk-packagegroup-sdk-host at all
>>> packagegroup-cross-canadian-arm at all
>>> | Loading cache...
>>> | Updating cache...
>>> ######################################## [100%]
>>> |
>>> | Computing transaction...error: Can't install
>>> packagegroup-cross-canadian-arm-1.0-r0 at all: no package provides
>>> meta-environment-arm
>>> |
>>> | Saving cache...
>>> |
>>> | DEBUG: Python function do_populate_sdk finished
>>>
>>>
>>>
>>>
>>>>
>>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>>> <swaroop.damarla at gmail.com> wrote:
>>>>>
>>>>>
>>>>> Hi Jessica & Philip,
>>>>>
>>>>> I have an issue... This is such a long error ... I even did a fresh
>>>>> build
>>>>> by deleting the "tmp" directory. The image build went very well but the
>>>>> toolchain is always giving me a error...
>>>>>
>>>>> | Selecting previously unselected package xz-dev.
>>>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>>> | The following package disappeared from your system as
>>>>> | all files have been overwritten by other packages:
>>>>> | avahi
>>>>> | log_check: Using
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> as logfile
>>>>> | Logfile is clean
>>>>> | Installing NATIVESDK packages
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ Release.gpg
>>>>> | Ign file: ./ Release.gpg
>>>>> | Get:1 file: ./ Release [24 B]
>>>>> | Get:2 file: ./ Release [11 B]
>>>>> | Ign file: ./ Translation-en
>>>>> | Ign file: ./ Translation-en
>>>>> | Reading package lists...
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | Reading package lists...
>>>>> | Building dependency tree...
>>>>> | Reading state information...
>>>>> | Some packages could not be installed. This may mean that you have
>>>>> | requested an impossible situation or if you are using the unstable
>>>>> | distribution that some required packages have not yet been created
>>>>> | or been moved out of Incoming.
>>>>> | The following information may help to resolve the situation:
>>>>> |
>>>>> | The following packages have unmet dependencies:
>>>>> | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: gcc-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: meta-environment-arm but
>>>>> it
>>>>> is not installable
>>>>> | Depends:
>>>>> binutils-cross-canadian-arm
>>>>> but it is not installable
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | E: Unable to correct problems, you have held broken packages.
>>>>> | DEBUG: Python function do_populate_sdk finished
>>>>> | ERROR: Function failed: populate_sdk_image (see
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> for further information)
>>>>> ERROR: Task 10
>>>>>
>>>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk) failed with exit code '1'
>>>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>>>> be
>>>>> rerun and 1 failed.
>>>>>
>>>>> Summary: 1 task failed:
>>>>>
>>>>>
>>>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk
>>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>>> code.
>>>>>
>>>>> I am not able to install those packages as they say there are no
>>>>> installation candidate for them...
>>>>>
>>>>>
>>>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zhang at intel.com>
>>>>> wrote:
>>>>>>
>>>>>>
>>>>>> Hi Satya,
>>>>>>
>>>>>>
>>>>>>
>>>>>> Use bitbake image-name –c populate_sdk, this allows you to create a
>>>>>> toolchain with sysroot that match your target image that allows you to
>>>>>> develop app against…
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Jessica
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: yocto-bounces at yoctoproject.org
>>>>>> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Satya Swaroop
>>>>>> Damarla
>>>>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>>>>> To: yocto at yoctoproject.org
>>>>>> Subject: [yocto] Application Development
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hi Guys,
>>>>>>
>>>>>>
>>>>>>
>>>>>> I have an issue... I created a custom image based on NVIDIA Tegra2 with
>>>>>> a
>>>>>> custom kernel. I installed packages specific Tegra board and
>>>>>> application
>>>>>> specific. Now we want to send the baord and the new linux image for
>>>>>> application development...
>>>>>>
>>>>>>
>>>>>>
>>>>>> As I went through ADT manual, I only found qemu based toolchains but I
>>>>>> want to create toolchain based on my rootfs and kernel... so that the
>>>>>> development team can develop a voip application for the board... I am
>>>>>> kind
>>>>>> of stuck how to proceed in this issue...
>>>>>>
>>>>>>
>>>>>>
>>>>>> I really need a small way out and hopefully I will catch things
>>>>>> automatically..
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Satya
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> yocto mailing list
>>>> yocto at yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>
>>>
>>> On Fri, Jun 7, 2013 at 9:10 AM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>>
>>>> SHould we install development and debigging pacakages in the images when
>>>> we
>>>> want to build a toolchain.. I mean this
>>>>
>>>> "dbg-pkgs" - add -dbg packages for all installed packages
>>>> # (adds symbol information for debugging/profiling)
>>>> # "dev-pkgs" - add -dev packages for all installed packages
>>>> # (useful if you want to develop against libs in the
>>>> image)
>>>>
>>>>
>>>> Greets,
>>>> Satya
>>>>
>>>>
>>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>>> <swaroop.damarla at gmail.com> wrote:
>>>>>
>>>>>
>>>>> Hi Jessica & Philip,
>>>>>
>>>>> I have an issue... This is such a long error ... I even did a fresh
>>>>> build
>>>>> by deleting the "tmp" directory. The image build went very well but the
>>>>> toolchain is always giving me a error...
>>>>>
>>>>> | Selecting previously unselected package xz-dev.
>>>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>>> | The following package disappeared from your system as
>>>>> | all files have been overwritten by other packages:
>>>>> | avahi
>>>>> | log_check: Using
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> as logfile
>>>>> | Logfile is clean
>>>>> | Installing NATIVESDK packages
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ InRelease
>>>>> | Ign file: ./ Release.gpg
>>>>> | Ign file: ./ Release.gpg
>>>>> | Get:1 file: ./ Release [24 B]
>>>>> | Get:2 file: ./ Release [11 B]
>>>>> | Ign file: ./ Translation-en
>>>>> | Ign file: ./ Translation-en
>>>>> | Reading package lists...
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | Reading package lists...
>>>>> | Building dependency tree...
>>>>> | Reading state information...
>>>>> | Some packages could not be installed. This may mean that you have
>>>>> | requested an impossible situation or if you are using the unstable
>>>>> | distribution that some required packages have not yet been created
>>>>> | or been moved out of Incoming.
>>>>> | The following information may help to resolve the situation:
>>>>> |
>>>>> | The following packages have unmet dependencies:
>>>>> | packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: gcc-cross-canadian-arm but
>>>>> it is not installable
>>>>> | Depends: meta-environment-arm but
>>>>> it
>>>>> is not installable
>>>>> | Depends:
>>>>> binutils-cross-canadian-arm
>>>>> but it is not installable
>>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>>> nativesdk-pkgconfig__pkg-config__
>>>>> | W: You may want to run apt-get update to correct these problems
>>>>> | E: Unable to correct problems, you have held broken packages.
>>>>> | DEBUG: Python function do_populate_sdk finished
>>>>> | ERROR: Function failed: populate_sdk_image (see
>>>>>
>>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>>> for further information)
>>>>> ERROR: Task 10
>>>>>
>>>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk) failed with exit code '1'
>>>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>>>> be
>>>>> rerun and 1 failed.
>>>>>
>>>>> Summary: 1 task failed:
>>>>>
>>>>>
>>>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>>> do_populate_sdk
>>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>>> code.
>>>>>
>>>>> I am not able to install those packages as they say there are no
>>>>> installation candidate for them...
>>>>>
>>>>>
>>>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zhang at intel.com>
>>>>> wrote:
>>>>>>
>>>>>>
>>>>>> Hi Satya,
>>>>>>
>>>>>>
>>>>>>
>>>>>> Use bitbake image-name –c populate_sdk, this allows you to create a
>>>>>> toolchain with sysroot that match your target image that allows you to
>>>>>> develop app against…
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Jessica
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: yocto-bounces at yoctoproject.org
>>>>>> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Satya Swaroop
>>>>>> Damarla
>>>>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>>>>> To: yocto at yoctoproject.org
>>>>>> Subject: [yocto] Application Development
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hi Guys,
>>>>>>
>>>>>>
>>>>>>
>>>>>> I have an issue... I created a custom image based on NVIDIA Tegra2 with
>>>>>> a
>>>>>> custom kernel. I installed packages specific Tegra board and
>>>>>> application
>>>>>> specific. Now we want to send the baord and the new linux image for
>>>>>> application development...
>>>>>>
>>>>>>
>>>>>>
>>>>>> As I went through ADT manual, I only found qemu based toolchains but I
>>>>>> want to create toolchain based on my rootfs and kernel... so that the
>>>>>> development team can develop a voip application for the board... I am
>>>>>> kind
>>>>>> of stuck how to proceed in this issue...
>>>>>>
>>>>>>
>>>>>>
>>>>>> I really need a small way out and hopefully I will catch things
>>>>>> automatically..
>>>>>>
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Satya
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> yocto mailing list
>>>> yocto at yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas | Consulting for the
>> MLB Associates | Embedded world
>> ------------------------------------------------------------
>>
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
More information about the yocto
mailing list