[yocto] Application Development

Hans Beckérus hans.beckerus at gmail.com
Fri Jun 7 06:40:50 PDT 2013 

On Fri, Jun 7, 2013 at 3:34 PM, Gary Thomas <gary at mlbassoc.com> wrote:
> On 2013-06-07 07:10, Hans Beckérus wrote:
>>
>> On Fri, Jun 7, 2013 at 9:10 AM, DAMARLA Satya Swaroop
>> <swaroop.damarla at gmail.com> wrote:
>>>
>>> SHould we install development and debigging pacakages in the images when
>>> we
>>> want to build a toolchain.. I mean this
>>>
>>>   "dbg-pkgs"       - add -dbg packages for all installed packages
>>> #                     (adds symbol information for debugging/profiling)
>>> #  "dev-pkgs"       - add -dev packages for all installed packages
>>> #                     (useful if you want to develop against libs in the
>>> image)
>>>
>>>
>>> Greets,
>>> Satya
>>>
>> I actually tried the 'bitbake <image> -c populate-sdk but it fails :(
>> Any clues to what make things go wrong this time? Nothing provides
>> meta-environment-arm??
>
>
> Do you have "tools-sdk" set in your IMAGE_FEATURES?
>
Actually no. I did not find a reference of it in the ADT documentation
so I did not know it was required.
It will try again.


>>
>> | Note: adding Smart channel x86_64_nativesdk (25)
>> |
>> |
>> | Note: adding Smart channel all (10)
>> |
>> |
>> | Note: configuring RPM cross-install scriptlet_wrapper
>> |
>> | Updating cache...
>> ######################################## [100%]
>> |
>> | Saving cache...
>> |
>> | Note: adding Smart RPM DB channel
>> |
>> | Note: to be installed:  nativesdk-packagegroup-sdk-host at all
>> packagegroup-cross-canadian-arm at all
>> | Loading cache...
>> | Updating cache...
>> ######################################## [100%]
>> |
>> | Computing transaction...error: Can't install
>> packagegroup-cross-canadian-arm-1.0-r0 at all: no package provides
>> meta-environment-arm
>> |
>> | Saving cache...
>> |
>> | DEBUG: Python function do_populate_sdk finished
>>
>>
>>
>>
>>>
>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>>
>>>>
>>>> Hi Jessica & Philip,
>>>>
>>>> I have an issue... This is such a long error ... I even did a fresh
>>>> build
>>>> by deleting the "tmp" directory. The image build went very well but the
>>>> toolchain is always giving me a error...
>>>>
>>>> | Selecting previously unselected package xz-dev.
>>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>> | The following package disappeared from your system as
>>>> | all files have been overwritten by other packages:
>>>> |   avahi
>>>> | log_check: Using
>>>>
>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>> as logfile
>>>> | Logfile is clean
>>>> | Installing NATIVESDK packages
>>>> | Ign file: ./ InRelease
>>>> | Ign file: ./ InRelease
>>>> | Ign file: ./ Release.gpg
>>>> | Ign file: ./ Release.gpg
>>>> | Get:1 file: ./ Release [24 B]
>>>> | Get:2 file: ./ Release [11 B]
>>>> | Ign file: ./ Translation-en
>>>> | Ign file: ./ Translation-en
>>>> | Reading package lists...
>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>> nativesdk-pkgconfig__pkg-config__
>>>> | W: You may want to run apt-get update to correct these problems
>>>> | Reading package lists...
>>>> | Building dependency tree...
>>>> | Reading state information...
>>>> | Some packages could not be installed. This may mean that you have
>>>> | requested an impossible situation or if you are using the unstable
>>>> | distribution that some required packages have not yet been created
>>>> | or been moved out of Incoming.
>>>> | The following information may help to resolve the situation:
>>>> |
>>>> | The following packages have unmet dependencies:
>>>> |  packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but
>>>> it is not installable
>>>> |                                    Depends: gcc-cross-canadian-arm but
>>>> it is not installable
>>>> |                                    Depends: meta-environment-arm but
>>>> it
>>>> is not installable
>>>> |                                    Depends:
>>>> binutils-cross-canadian-arm
>>>> but it is not installable
>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>> nativesdk-pkgconfig__pkg-config__
>>>> | W: You may want to run apt-get update to correct these problems
>>>> | E: Unable to correct problems, you have held broken packages.
>>>> | DEBUG: Python function do_populate_sdk finished
>>>> | ERROR: Function failed: populate_sdk_image (see
>>>>
>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>> for further information)
>>>> ERROR: Task 10
>>>>
>>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>> do_populate_sdk) failed with exit code '1'
>>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>>> be
>>>> rerun and 1 failed.
>>>>
>>>> Summary: 1 task failed:
>>>>
>>>>
>>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>> do_populate_sdk
>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>> code.
>>>>
>>>> I am not able to install those packages as they say there are no
>>>> installation candidate for them...
>>>>
>>>>
>>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zhang at intel.com>
>>>> wrote:
>>>>>
>>>>>
>>>>> Hi Satya,
>>>>>
>>>>>
>>>>>
>>>>> Use bitbake image-name –c populate_sdk, this allows you to create a
>>>>> toolchain with sysroot that match your target image that allows you to
>>>>> develop app against…
>>>>>
>>>>>
>>>>>
>>>>> Cheers,
>>>>>
>>>>> Jessica
>>>>>
>>>>>
>>>>>
>>>>> From: yocto-bounces at yoctoproject.org
>>>>> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Satya Swaroop
>>>>> Damarla
>>>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>>>> To: yocto at yoctoproject.org
>>>>> Subject: [yocto] Application Development
>>>>>
>>>>>
>>>>>
>>>>> Hi Guys,
>>>>>
>>>>>
>>>>>
>>>>> I have an issue... I created a custom image based on NVIDIA Tegra2 with
>>>>> a
>>>>> custom kernel. I installed  packages specific Tegra board and
>>>>> application
>>>>> specific. Now we want to send the baord and the new linux image for
>>>>> application development...
>>>>>
>>>>>
>>>>>
>>>>> As I went through ADT manual, I only found qemu based toolchains but I
>>>>> want to create toolchain based on my rootfs and kernel... so that the
>>>>> development team can develop a voip application for the board... I am
>>>>> kind
>>>>> of stuck how to proceed in this issue...
>>>>>
>>>>>
>>>>>
>>>>> I really need a small way out and hopefully I will catch things
>>>>> automatically..
>>>>>
>>>>>
>>>>>
>>>>> Cheers,
>>>>>
>>>>> Satya
>>>>
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>
>> On Fri, Jun 7, 2013 at 9:10 AM, DAMARLA Satya Swaroop
>> <swaroop.damarla at gmail.com> wrote:
>>>
>>> SHould we install development and debigging pacakages in the images when
>>> we
>>> want to build a toolchain.. I mean this
>>>
>>>   "dbg-pkgs"       - add -dbg packages for all installed packages
>>> #                     (adds symbol information for debugging/profiling)
>>> #  "dev-pkgs"       - add -dev packages for all installed packages
>>> #                     (useful if you want to develop against libs in the
>>> image)
>>>
>>>
>>> Greets,
>>> Satya
>>>
>>>
>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>>
>>>>
>>>> Hi Jessica & Philip,
>>>>
>>>> I have an issue... This is such a long error ... I even did a fresh
>>>> build
>>>> by deleting the "tmp" directory. The image build went very well but the
>>>> toolchain is always giving me a error...
>>>>
>>>> | Selecting previously unselected package xz-dev.
>>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>> | The following package disappeared from your system as
>>>> | all files have been overwritten by other packages:
>>>> |   avahi
>>>> | log_check: Using
>>>>
>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>> as logfile
>>>> | Logfile is clean
>>>> | Installing NATIVESDK packages
>>>> | Ign file: ./ InRelease
>>>> | Ign file: ./ InRelease
>>>> | Ign file: ./ Release.gpg
>>>> | Ign file: ./ Release.gpg
>>>> | Get:1 file: ./ Release [24 B]
>>>> | Get:2 file: ./ Release [11 B]
>>>> | Ign file: ./ Translation-en
>>>> | Ign file: ./ Translation-en
>>>> | Reading package lists...
>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>> nativesdk-pkgconfig__pkg-config__
>>>> | W: You may want to run apt-get update to correct these problems
>>>> | Reading package lists...
>>>> | Building dependency tree...
>>>> | Reading state information...
>>>> | Some packages could not be installed. This may mean that you have
>>>> | requested an impossible situation or if you are using the unstable
>>>> | distribution that some required packages have not yet been created
>>>> | or been moved out of Incoming.
>>>> | The following information may help to resolve the situation:
>>>> |
>>>> | The following packages have unmet dependencies:
>>>> |  packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but
>>>> it is not installable
>>>> |                                    Depends: gcc-cross-canadian-arm but
>>>> it is not installable
>>>> |                                    Depends: meta-environment-arm but
>>>> it
>>>> is not installable
>>>> |                                    Depends:
>>>> binutils-cross-canadian-arm
>>>> but it is not installable
>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>> nativesdk-pkgconfig__pkg-config__
>>>> | W: You may want to run apt-get update to correct these problems
>>>> | E: Unable to correct problems, you have held broken packages.
>>>> | DEBUG: Python function do_populate_sdk finished
>>>> | ERROR: Function failed: populate_sdk_image (see
>>>>
>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>> for further information)
>>>> ERROR: Task 10
>>>>
>>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>> do_populate_sdk) failed with exit code '1'
>>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>>> be
>>>> rerun and 1 failed.
>>>>
>>>> Summary: 1 task failed:
>>>>
>>>>
>>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>> do_populate_sdk
>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>> code.
>>>>
>>>> I am not able to install those packages as they say there are no
>>>> installation candidate for them...
>>>>
>>>>
>>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zhang at intel.com>
>>>> wrote:
>>>>>
>>>>>
>>>>> Hi Satya,
>>>>>
>>>>>
>>>>>
>>>>> Use bitbake image-name –c populate_sdk, this allows you to create a
>>>>> toolchain with sysroot that match your target image that allows you to
>>>>> develop app against…
>>>>>
>>>>>
>>>>>
>>>>> Cheers,
>>>>>
>>>>> Jessica
>>>>>
>>>>>
>>>>>
>>>>> From: yocto-bounces at yoctoproject.org
>>>>> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Satya Swaroop
>>>>> Damarla
>>>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>>>> To: yocto at yoctoproject.org
>>>>> Subject: [yocto] Application Development
>>>>>
>>>>>
>>>>>
>>>>> Hi Guys,
>>>>>
>>>>>
>>>>>
>>>>> I have an issue... I created a custom image based on NVIDIA Tegra2 with
>>>>> a
>>>>> custom kernel. I installed  packages specific Tegra board and
>>>>> application
>>>>> specific. Now we want to send the baord and the new linux image for
>>>>> application development...
>>>>>
>>>>>
>>>>>
>>>>> As I went through ADT manual, I only found qemu based toolchains but I
>>>>> want to create toolchain based on my rootfs and kernel... so that the
>>>>> development team can develop a voip application for the board... I am
>>>>> kind
>>>>> of stuck how to proceed in this issue...
>>>>>
>>>>>
>>>>>
>>>>> I really need a small way out and hopefully I will catch things
>>>>> automatically..
>>>>>
>>>>>
>>>>>
>>>>> Cheers,
>>>>>
>>>>> Satya
>>>>
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
>
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto


On Fri, Jun 7, 2013 at 3:34 PM, Gary Thomas <gary at mlbassoc.com> wrote:
> On 2013-06-07 07:10, Hans Beckérus wrote:
>>
>> On Fri, Jun 7, 2013 at 9:10 AM, DAMARLA Satya Swaroop
>> <swaroop.damarla at gmail.com> wrote:
>>>
>>> SHould we install development and debigging pacakages in the images when
>>> we
>>> want to build a toolchain.. I mean this
>>>
>>>   "dbg-pkgs"       - add -dbg packages for all installed packages
>>> #                     (adds symbol information for debugging/profiling)
>>> #  "dev-pkgs"       - add -dev packages for all installed packages
>>> #                     (useful if you want to develop against libs in the
>>> image)
>>>
>>>
>>> Greets,
>>> Satya
>>>
>> I actually tried the 'bitbake <image> -c populate-sdk but it fails :(
>> Any clues to what make things go wrong this time? Nothing provides
>> meta-environment-arm??
>
>
> Do you have "tools-sdk" set in your IMAGE_FEATURES?
>
>
>>
>> Hans
>>
>> | Note: adding Smart channel x86_64_nativesdk (25)
>> |
>> |
>> | Note: adding Smart channel all (10)
>> |
>> |
>> | Note: configuring RPM cross-install scriptlet_wrapper
>> |
>> | Updating cache...
>> ######################################## [100%]
>> |
>> | Saving cache...
>> |
>> | Note: adding Smart RPM DB channel
>> |
>> | Note: to be installed:  nativesdk-packagegroup-sdk-host at all
>> packagegroup-cross-canadian-arm at all
>> | Loading cache...
>> | Updating cache...
>> ######################################## [100%]
>> |
>> | Computing transaction...error: Can't install
>> packagegroup-cross-canadian-arm-1.0-r0 at all: no package provides
>> meta-environment-arm
>> |
>> | Saving cache...
>> |
>> | DEBUG: Python function do_populate_sdk finished
>>
>>
>>
>>
>>>
>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>>
>>>>
>>>> Hi Jessica & Philip,
>>>>
>>>> I have an issue... This is such a long error ... I even did a fresh
>>>> build
>>>> by deleting the "tmp" directory. The image build went very well but the
>>>> toolchain is always giving me a error...
>>>>
>>>> | Selecting previously unselected package xz-dev.
>>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>> | The following package disappeared from your system as
>>>> | all files have been overwritten by other packages:
>>>> |   avahi
>>>> | log_check: Using
>>>>
>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>> as logfile
>>>> | Logfile is clean
>>>> | Installing NATIVESDK packages
>>>> | Ign file: ./ InRelease
>>>> | Ign file: ./ InRelease
>>>> | Ign file: ./ Release.gpg
>>>> | Ign file: ./ Release.gpg
>>>> | Get:1 file: ./ Release [24 B]
>>>> | Get:2 file: ./ Release [11 B]
>>>> | Ign file: ./ Translation-en
>>>> | Ign file: ./ Translation-en
>>>> | Reading package lists...
>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>> nativesdk-pkgconfig__pkg-config__
>>>> | W: You may want to run apt-get update to correct these problems
>>>> | Reading package lists...
>>>> | Building dependency tree...
>>>> | Reading state information...
>>>> | Some packages could not be installed. This may mean that you have
>>>> | requested an impossible situation or if you are using the unstable
>>>> | distribution that some required packages have not yet been created
>>>> | or been moved out of Incoming.
>>>> | The following information may help to resolve the situation:
>>>> |
>>>> | The following packages have unmet dependencies:
>>>> |  packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but
>>>> it is not installable
>>>> |                                    Depends: gcc-cross-canadian-arm but
>>>> it is not installable
>>>> |                                    Depends: meta-environment-arm but
>>>> it
>>>> is not installable
>>>> |                                    Depends:
>>>> binutils-cross-canadian-arm
>>>> but it is not installable
>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>> nativesdk-pkgconfig__pkg-config__
>>>> | W: You may want to run apt-get update to correct these problems
>>>> | E: Unable to correct problems, you have held broken packages.
>>>> | DEBUG: Python function do_populate_sdk finished
>>>> | ERROR: Function failed: populate_sdk_image (see
>>>>
>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>> for further information)
>>>> ERROR: Task 10
>>>>
>>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>> do_populate_sdk) failed with exit code '1'
>>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>>> be
>>>> rerun and 1 failed.
>>>>
>>>> Summary: 1 task failed:
>>>>
>>>>
>>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>> do_populate_sdk
>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>> code.
>>>>
>>>> I am not able to install those packages as they say there are no
>>>> installation candidate for them...
>>>>
>>>>
>>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zhang at intel.com>
>>>> wrote:
>>>>>
>>>>>
>>>>> Hi Satya,
>>>>>
>>>>>
>>>>>
>>>>> Use bitbake image-name –c populate_sdk, this allows you to create a
>>>>> toolchain with sysroot that match your target image that allows you to
>>>>> develop app against…
>>>>>
>>>>>
>>>>>
>>>>> Cheers,
>>>>>
>>>>> Jessica
>>>>>
>>>>>
>>>>>
>>>>> From: yocto-bounces at yoctoproject.org
>>>>> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Satya Swaroop
>>>>> Damarla
>>>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>>>> To: yocto at yoctoproject.org
>>>>> Subject: [yocto] Application Development
>>>>>
>>>>>
>>>>>
>>>>> Hi Guys,
>>>>>
>>>>>
>>>>>
>>>>> I have an issue... I created a custom image based on NVIDIA Tegra2 with
>>>>> a
>>>>> custom kernel. I installed  packages specific Tegra board and
>>>>> application
>>>>> specific. Now we want to send the baord and the new linux image for
>>>>> application development...
>>>>>
>>>>>
>>>>>
>>>>> As I went through ADT manual, I only found qemu based toolchains but I
>>>>> want to create toolchain based on my rootfs and kernel... so that the
>>>>> development team can develop a voip application for the board... I am
>>>>> kind
>>>>> of stuck how to proceed in this issue...
>>>>>
>>>>>
>>>>>
>>>>> I really need a small way out and hopefully I will catch things
>>>>> automatically..
>>>>>
>>>>>
>>>>>
>>>>> Cheers,
>>>>>
>>>>> Satya
>>>>
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>
>> On Fri, Jun 7, 2013 at 9:10 AM, DAMARLA Satya Swaroop
>> <swaroop.damarla at gmail.com> wrote:
>>>
>>> SHould we install development and debigging pacakages in the images when
>>> we
>>> want to build a toolchain.. I mean this
>>>
>>>   "dbg-pkgs"       - add -dbg packages for all installed packages
>>> #                     (adds symbol information for debugging/profiling)
>>> #  "dev-pkgs"       - add -dev packages for all installed packages
>>> #                     (useful if you want to develop against libs in the
>>> image)
>>>
>>>
>>> Greets,
>>> Satya
>>>
>>>
>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>>
>>>>
>>>> Hi Jessica & Philip,
>>>>
>>>> I have an issue... This is such a long error ... I even did a fresh
>>>> build
>>>> by deleting the "tmp" directory. The image build went very well but the
>>>> toolchain is always giving me a error...
>>>>
>>>> | Selecting previously unselected package xz-dev.
>>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>> | The following package disappeared from your system as
>>>> | all files have been overwritten by other packages:
>>>> |   avahi
>>>> | log_check: Using
>>>>
>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>> as logfile
>>>> | Logfile is clean
>>>> | Installing NATIVESDK packages
>>>> | Ign file: ./ InRelease
>>>> | Ign file: ./ InRelease
>>>> | Ign file: ./ Release.gpg
>>>> | Ign file: ./ Release.gpg
>>>> | Get:1 file: ./ Release [24 B]
>>>> | Get:2 file: ./ Release [11 B]
>>>> | Ign file: ./ Translation-en
>>>> | Ign file: ./ Translation-en
>>>> | Reading package lists...
>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>> nativesdk-pkgconfig__pkg-config__
>>>> | W: You may want to run apt-get update to correct these problems
>>>> | Reading package lists...
>>>> | Building dependency tree...
>>>> | Reading state information...
>>>> | Some packages could not be installed. This may mean that you have
>>>> | requested an impossible situation or if you are using the unstable
>>>> | distribution that some required packages have not yet been created
>>>> | or been moved out of Incoming.
>>>> | The following information may help to resolve the situation:
>>>> |
>>>> | The following packages have unmet dependencies:
>>>> |  packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm but
>>>> it is not installable
>>>> |                                    Depends: gcc-cross-canadian-arm but
>>>> it is not installable
>>>> |                                    Depends: meta-environment-arm but
>>>> it
>>>> is not installable
>>>> |                                    Depends:
>>>> binutils-cross-canadian-arm
>>>> but it is not installable
>>>> | W: Ignoring Provides line with DepCompareOp for package
>>>> nativesdk-pkgconfig__pkg-config__
>>>> | W: You may want to run apt-get update to correct these problems
>>>> | E: Unable to correct problems, you have held broken packages.
>>>> | DEBUG: Python function do_populate_sdk finished
>>>> | ERROR: Function failed: populate_sdk_image (see
>>>>
>>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.4066
>>>> for further information)
>>>> ERROR: Task 10
>>>>
>>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>> do_populate_sdk) failed with exit code '1'
>>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>>> be
>>>> rerun and 1 failed.
>>>>
>>>> Summary: 1 task failed:
>>>>
>>>>
>>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skidata.bb,
>>>> do_populate_sdk
>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>> code.
>>>>
>>>> I am not able to install those packages as they say there are no
>>>> installation candidate for them...
>>>>
>>>>
>>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica <jessica.zhang at intel.com>
>>>> wrote:
>>>>>
>>>>>
>>>>> Hi Satya,
>>>>>
>>>>>
>>>>>
>>>>> Use bitbake image-name –c populate_sdk, this allows you to create a
>>>>> toolchain with sysroot that match your target image that allows you to
>>>>> develop app against…
>>>>>
>>>>>
>>>>>
>>>>> Cheers,
>>>>>
>>>>> Jessica
>>>>>
>>>>>
>>>>>
>>>>> From: yocto-bounces at yoctoproject.org
>>>>> [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Satya Swaroop
>>>>> Damarla
>>>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>>>> To: yocto at yoctoproject.org
>>>>> Subject: [yocto] Application Development
>>>>>
>>>>>
>>>>>
>>>>> Hi Guys,
>>>>>
>>>>>
>>>>>
>>>>> I have an issue... I created a custom image based on NVIDIA Tegra2 with
>>>>> a
>>>>> custom kernel. I installed  packages specific Tegra board and
>>>>> application
>>>>> specific. Now we want to send the baord and the new linux image for
>>>>> application development...
>>>>>
>>>>>
>>>>>
>>>>> As I went through ADT manual, I only found qemu based toolchains but I
>>>>> want to create toolchain based on my rootfs and kernel... so that the
>>>>> development team can develop a voip application for the board... I am
>>>>> kind
>>>>> of stuck how to proceed in this issue...
>>>>>
>>>>>
>>>>>
>>>>> I really need a small way out and hopefully I will catch things
>>>>> automatically..
>>>>>
>>>>>
>>>>>
>>>>> Cheers,
>>>>>
>>>>> Satya
>>>>
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
>
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

More information about the yocto mailing list