[yocto] meta-cedartrail - serial console

[Bodke, Kishore K]

>-----Original Message-----
>From: yocto-bounces at yoctoproject.org [mailto:yocto-
>bounces at yoctoproject.org] On Behalf Of jfabernathy
>Sent: Thursday, May 31, 2012 9:12 AM
>To: yocto at yoctoproject.org
>Subject: [yocto] meta-cedartrail - serial console
>
>Using a DN2800MT (Marshalltown) Intel board, I'm testing the
>meta-cedartrail using edison branch and noticed an issues with the
>serial console.
>
>The cedartrail.conf in the machine directory has the following statements:
>
>SYSLINUX_OPTS = "serial 0 115200"
>SERIAL_CONSOLE = "115200 ttyS0"
>APPEND += "console=ttyS0,115200 console=tty0"
>

I just saw that Edison branch has ttyS3 enabled.

SYSLINUX_OPTS = "serial 3 115200"
SERIAL_CONSOLE = "115200 ttyS3"
APPEND += "console=ttyS3,115200 console=tty3"

Are you looking into right branch?

Thanks
-Kishore.
 
>However, when the image booted, I had no serial console on ttyS0.  I
>checked /etc/inittab and noticed that the following line existed:
>
>S:2345:respawn:/sbin/getty 115200 ttyS3
>
>I changed the ttyS3 to ttyS0 and then I have a serial console on the
>next reboot.  So it appears the override in the .conf file is not
>working.  Also I only have the console from getty, and not the kernel
>logging console.
>
>Anyone have a solution??
>
>If this is considered a bug I can put it on bugzilla.
>
>Jim A
>
>_______________________________________________
>yocto mailing list
>yocto at yoctoproject.org
>https://lists.yoctoproject.org/listinfo/yocto