[yocto] build error after recent pull

[jfabernathy]

On 03/19/2012 03:13 PM, Gary Thomas wrote:
> On 2012-03-19 13:04, jfabernathy wrote:
>> On 03/19/2012 03:03 PM, Gary Thomas wrote:
>>> On 2012-03-19 12:59, jfabernathy wrote:
>>>> On 03/19/2012 02:55 PM, Gary Thomas wrote:
>>>>> On 2012-03-19 10:02, jfabernathy wrote:
>>>>>> Just did a git pull today on poky and meta-intel. I tried to 
>>>>>> rebuild meta-sugarbay again and got a build error. Not sure why 
>>>>>> yet. Not critical, just a spot check of things.
>>>>>> ------------------
>>>>>>
>>>>>>
>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
>>>>>> NOTE: Running task 1723 of 5148 (ID: 1928, 
>>>>>> /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, 
>>>>>> do_compile)
>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
>>>>>> ERROR: Function failed: do_compile (see 
>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 
>>>>>> for further information)
>>>>>> ERROR: Logfile of failure stored in: 
>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>>> Log data follows:
>>>>>> | DEBUG: SITE files ['endian-little', 'common-linux', 
>>>>>> 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
>>>>>> | ERROR: Function failed: do_compile (see 
>>>>>> /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 
>>>>>> for further information)
>>>>>> | NOTE: make -j 8
>>>>>> | make[1]: Entering directory 
>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>> | Making sources for autoconf
>>>>>> | make[2]: Entering directory 
>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>> | make[2]: *** No rule to make target 
>>>>>> `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', 
>>>>>> needed by
>>>>>> `glapi_dispatch.o'. Stop.
>>>>>> | make[2]: Leaving directory 
>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>>> | make[1]: *** [subdirs] Error 1
>>>>>> | make[1]: Leaving directory 
>>>>>> `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>>> | make: *** [default] Error 1
>>>>>> | ERROR: oe_runmake failed
>>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
>>>>>> ERROR: Task 1928 
>>>>>> (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, 
>>>>>> do_compile) failed with exit code '1'
>>>>>
>>>>> What's your build host?
>>>>>
>>>>> Was this build from scratch? There was a discussion of much the
>>>>> same error on the meta-ti list last week where the host GCC was
>>>>> updated between two subsequent builds that gave this error.
>>>>>
>>>> Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 
>>>> 3.0.0-16-generic #29-Ubuntu SMP)
>>>>
>>>> gcc is 4.6.1
>>>>
>>>
>>> Was your build from scratch? Do you use [extant] sstate cache?
>>>
>> I had a preview successful build and just reran that after bitbake -c 
>> cleanall core-image-sato
>
> Do you have rm_work in your local.conf?

No to question on rm_work in local.conf
>
> Try this:
>   % bitbake -c cleansstate mesa-dri
>   % bitbake mesa-dri

This work without errors. I'm now doing bitbake core-image-sato to see 
if it completes.

>
> BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much - 
> images don't have much (any?)
> stuff that needs to get cleaned.  You can run 'bitbake 
> core-image-sato' as many times as you like
> and it will completely rebuild the image every time.
>
>
So  if I do a git pull and want to retest with new stuff, just bitbake 
core-image-sato or should I do something with cleansstate??

JIm A