[yocto] build error after recent pull

[Gary Thomas]

On 2012-03-19 13:04, jfabernathy wrote:
> On 03/19/2012 03:03 PM, Gary Thomas wrote:
>> On 2012-03-19 12:59, jfabernathy wrote:
>>> On 03/19/2012 02:55 PM, Gary Thomas wrote:
>>>> On 2012-03-19 10:02, jfabernathy wrote:
>>>>> Just did a git pull today on poky and meta-intel. I tried to rebuild meta-sugarbay again and got a build error. Not sure why yet. Not critical, just a spot check of things.
>>>>> ------------------
>>>>>
>>>>>
>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_configure: Succeeded
>>>>> NOTE: Running task 1723 of 5148 (ID: 1928, /home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile)
>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Started
>>>>> ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
>>>>> ERROR: Logfile of failure stored in: /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687
>>>>> Log data follows:
>>>>> | DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc', 'bit-64', 'x86_64-linux', 'common']
>>>>> | ERROR: Function failed: do_compile (see /build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/temp/log.do_compile.25687 for further information)
>>>>> | NOTE: make -j 8
>>>>> | make[1]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>> | Making sources for autoconf
>>>>> | make[2]: Entering directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>> | make[2]: *** No rule to make target `/build/sugarbay-master/tmp/sysroots/x86_64-linux/usr/lib/x86_64-poky-linux/gcc/x86_64-poky-linux/4.6.3/include/stddef.h', needed by
>>>>> `glapi_dispatch.o'. Stop.
>>>>> | make[2]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src/mapi/glapi'
>>>>> | make[1]: *** [subdirs] Error 1
>>>>> | make[1]: Leaving directory `/build/sugarbay-master/tmp/work/x86_64-poky-linux/mesa-dri-2_7.11-r13.1/Mesa-7.11/src'
>>>>> | make: *** [default] Error 1
>>>>> | ERROR: oe_runmake failed
>>>>> NOTE: package mesa-dri-2_7.11-r13.1: task do_compile: Failed
>>>>> ERROR: Task 1928 (/home/jim/poky/meta/recipes-graphics/mesa/mesa-dri_7.11.bb, do_compile) failed with exit code '1'
>>>>
>>>> What's your build host?
>>>>
>>>> Was this build from scratch? There was a discussion of much the
>>>> same error on the meta-ti list last week where the host GCC was
>>>> updated between two subsequent builds that gave this error.
>>>>
>>> Building on latest release Ubuntu 11.10 (Linux ubuntu-x64 3.0.0-16-generic #29-Ubuntu SMP)
>>>
>>> gcc is 4.6.1
>>>
>>
>> Was your build from scratch? Do you use [extant] sstate cache?
>>
> I had a preview successful build and just reran that after bitbake -c cleanall core-image-sato

Do you have rm_work in your local.conf?

Try this:
   % bitbake -c cleansstate mesa-dri
   % bitbake mesa-dri

BTW, 'bitbake -c cleanall core-image-sato' doesn't really do much - images don't have much (any?)
stuff that needs to get cleaned.  You can run 'bitbake core-image-sato' as many times as you like
and it will completely rebuild the image every time.


-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------