[yocto] beagleboard core-image-sato boots to serial port poky 1.3_M2

[Edward Vidal]

hello,
I added the line below to uEnv.txt based on Yi Zhao message.
bootcmd="mmc rescan 0; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000"
Now uEnv.txt is the following
mpurate=auto

bootcmd="mmc rescan 0; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000"
dvimode="hd720 omapfb.vram=0:8M,1:4M,2:4M"
vram=16M
optargs="consoleblank=0"
console="tty0 console=ttyO2,115200n8"
The system boots and with the network setup i can ssh into the beagleboard.
checking dmesg I see the following.

Unable to get DVI reset GPIO
 omap-mcbsp.2: alias fck already exists
 omap-mcbsp.3: alias fck already exists
OMAP DMA hardware revision 5.0

I tried id:3:initdefault still no display on beagleboard display.
Thanks any help will be appreciated :
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20120726/2e4d26cb/attachment.html>