[yocto] nothing building under denzil-7.0.1

[Jim Abernathy]

On 07/20/2012 04:39 PM, Tom Zanussi wrote:
> On Fri, 2012-07-20 at 16:35 -0400, Jim Abernathy wrote:
>> On 07/20/2012 04:29 PM, Scott Garman wrote:
>>> On 07/20/2012 01:11 PM, Jim Abernathy wrote:
>>>> There must be some basic thing I'm missing.  Nothing that I used to
>>>> build under denzil 7.0 will now build under denzil 7.0.1 or tracking the
>>>> denzil branch.  Are all the BSPs required to be updated to 7.0.1 before
>>>> you can run?
>>>>
>>>> I'd thought I'd check before I post a bunch of log files.
>>>>
>>>> I just downloaded the poky 7.0.1 tarball and cd'ed to that untarred
>>>> directory and untarred the 7.0 Intel BSPs.
>>>>
>>>> There must be a step I'm missing.  otherwise this would not have gotten
>>>> thru testing before deployment.
>>>>
>>>> Jim A
>>> Hi Jim,
>>>
>>> We need more specific information about the error(s) you're seeing.
>>> We've done extensive QA with 7.0.1 and meta-intel, so I imagine there
>>> must be a step you've forgotten.
>>>
>>> For example, you are using the denzil branch of meta-intel, right?
>>>
>>> Scott
>>>
>> I think it maybe that old problem with the n450 SRCREC being blank in
>> the linux-yocto bbappend file.  Obviously that BSP didn't get fixed
>> before 7.0.1 was deployed.  I'll put in the ones I used to patch in and
>> see if it works.
>>
> I updated the n450 in both the denzil and master meta-intel branches,
> but the tarball still needs to be updated with that fix.
>
> Is this the problem you're seeing, or are there other problems you're
> seeing with this and/or the other meta-intel BSPs?
>
> Tom

I should know shortly. I patched the n450 like I did before. I forgot 
that BSP didn't get updated when denzil 7.0.1 came out. Duh!

If you have it fixed in Denzil and master branch, I'll test that as well.
>> Jim A
>>
>>
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>