[yocto] nothing building under denzil-7.0.1

[Tom Zanussi]

On Fri, 2012-07-20 at 16:35 -0400, Jim Abernathy wrote:
> On 07/20/2012 04:29 PM, Scott Garman wrote:
> > On 07/20/2012 01:11 PM, Jim Abernathy wrote:
> >> There must be some basic thing I'm missing.  Nothing that I used to
> >> build under denzil 7.0 will now build under denzil 7.0.1 or tracking the
> >> denzil branch.  Are all the BSPs required to be updated to 7.0.1 before
> >> you can run?
> >>
> >> I'd thought I'd check before I post a bunch of log files.
> >>
> >> I just downloaded the poky 7.0.1 tarball and cd'ed to that untarred
> >> directory and untarred the 7.0 Intel BSPs.
> >>
> >> There must be a step I'm missing.  otherwise this would not have gotten
> >> thru testing before deployment.
> >>
> >> Jim A
> >
> > Hi Jim,
> >
> > We need more specific information about the error(s) you're seeing. 
> > We've done extensive QA with 7.0.1 and meta-intel, so I imagine there 
> > must be a step you've forgotten.
> >
> > For example, you are using the denzil branch of meta-intel, right?
> >
> > Scott
> >
> 
> I think it maybe that old problem with the n450 SRCREC being blank in 
> the linux-yocto bbappend file.  Obviously that BSP didn't get fixed 
> before 7.0.1 was deployed.  I'll put in the ones I used to patch in and 
> see if it works.
> 

I updated the n450 in both the denzil and master meta-intel branches,
but the tarball still needs to be updated with that fix.

Is this the problem you're seeing, or are there other problems you're
seeing with this and/or the other meta-intel BSPs?

Tom

> Jim A
> 
> 
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto