[yocto] error: runqemu command not fonund, when "$ runqemu qemux86 bzImage-qemux86.bin core-image-lsb-qt3-qemux86.ext3" THx!

[jack]

On 2012年04月16日 22:24, Zhang, Jessica wrote:
> Hi Jack,
>
> Can you check that you have runqemu under /opt/poky/1.1.1/sysroots/i686-pokysdk-linux/usr/bin/?  And can you do "echo $PATH" to check your PATH starts with /opt/poky/1.1.1/sysroots/i686-pokysdk-linux/usr/bin/
>
> Thanks,
> Jessica
> -----Original Message-----
> From: yocto-bounces at yoctoproject.org [mailto:yocto-bounces at yoctoproject.org] On Behalf Of jack
> Sent: Monday, April 16, 2012 3:58 AM
> To: Lu, Lianhao
> Cc: yocto at yoctoproject.org
> Subject: Re: [yocto] error: runqemu command not fonund, when "$ runqemu qemux86 bzImage-qemux86.bin core-image-lsb-qt3-qemux86.ext3" THx!
>
> On 2012年04月14日 18:22, Lu, Lianhao wrote:
>> jack wrote on 2012-04-14:
>>> hi,all! I Use a pre-built image and run it in the QEMU emulator.
>>> I have downloaded and installed
>>> "poky-eglibc-i686-i586-toolchain-gmae-1.1.1.tar.bz2", then I
>>> downloaded "bzImage-qemux86.bin"  and  "core-image-lsb-qt3-qemux86.ext3"
>>> but when
>>> "$ runqemu qemux86 bzImage-qemux86.bin core-image-lsb-qt3-qemux86.ext3"
>>> error like below:
>>> error: runqemu command not fonund
>>>
>> You may need to "source /opt/poky/1.1.1/environment-setup-i586-poky-linux" first before you "runqemu".
>>
>> Best Regards,
>> Lianhao
>>
>>
>>
> hello, Lianhao! Thank you for your answer. But I did "source /opt/poky/1.1.1/environment-setup-i586-poky-linux" first before "runqemu".error still like this, error: runqemu command not fonun. Could you help me ?
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
Thank you very much, I have solved the problem. I installed the 
"poky-eglibc-i686-i586-toolchain-gmae-1.1.1.tar.bz2" under a wrong path.