[yocto] Fullpass Test Report for Yocto 1.1 M4 RC2 20110914 Build
Xu, Jiajun
jiajun.xu at intel.com
Thu Sep 22 08:07:10 PDT 2011
Hi All,
This is the fullpass test report for Yocto 1.1 M4 RC2 build. There are 7 new bugs found in this testing. Sugarbay testing is blocked due to sato-sdk image not copied to sharing folder on autobuilder. Most multilib function could not work. non-GPLv3 build reports error when building core-image-basic. Basic functions of hob work well, except for the issues that 2nd build could not work after force stop 1st build and non-GPLv3 de-selection not work issue. x32 build could not work, meanwhile Nitin has fixed the issue in latest commit. Xorg eats lots of CPU’s resource issue still exists on crownbay. Both Crashme/Helltest testing on Jasperforest and LTP testing on Beagleboard could pass 24 hours stress testing.
Note: for different image they are against different commit/branch information, you can refer to ‘Commit Information’ section for detail information. This test result is archived @ https://wiki.pokylinux.org/wiki/Yocto_1.1_Milestone_Test_Report
Test Summary:
---------------------------------------
Test Result Summary
Component
Target
Status
Comments
BSP
eMenlow
GOOD
I2C_transfer error; Standby failed;
Blacksand
GOOD
Everything runs well
Crownbay-emgd
GOOD
Xorg eat lots of cup's resource after standby
Sugarbay
GOOD
Everything runs well
Jasperforest-lsb
GOOD
I/OAT DMA engine init failed;
Beagleboard
GOOD
Everything runs well
Routerstationpro
GOOD
Everything runs well
Mpc8315e-rdb
GOOD
Everything runs well
QEMU
qemux86
GOOD
Everything runs well
qemux86-64
GOOD
Everything runs well
qemuarm
GOOD
Everything runs well
qemuppc
GOOD
Everything runs well
qemumips
GOOD
Everything runs well
ADT
GOOD
Everything runs well
Core build system
BUGGY
Multilib could not work; non-GPLv3 could not work
Power/Performance
GOOD
Power consumption of sugarbay and crownbay are 34.81W and 28.11W respectively
Build time for a sato image on Core i7 machine is 124 minutes.
Compliance
GOOD
No regression for LTP and POSIX
Stress
GOOD
Both Crashme/Helltest testing on Jasperforest and LTP testing on Beagleboard could pass 24 hours stress testing.
HOB
BUGGY
Could not trigger 2nd build after stop one build; non-GPLv3 deselection not work
Critical bugs, more than 50% test cases are blocked
Only Normal, Minor or Enhancement bugs, or less than 10% test cases failed
Normal, Major and Critical bugs, and more than 10% test cases failed
Detailed Test Result for each component
Target
Total TCs
Not Run
Passed
Failed
Not testable (Blocked)
eMenlow Sato-SDK
58
0
56
2 (bug 310, 503)
0
n450 Sato-SDK
58
0
58
0
0
Crownbay-Sato-SDK
58
0
58
0
0
Sugarbay Sato-SDK
61
0
61
0
0
Jasperforest lsb-SDK
32
0
31
1 (bug 1188)
0
Beagleboard Sato-SDK
39
0
39
0
0
Routerstationpro Sato-SDK
33
0
33
0
0
Mpc8315e-rdb Sato-SDK
36
0
36
0
0
Qemux86-64 Sato
29
0
28
1 (bug 1174)
0
Qemux86-64 Sato-SDK
34
0
33
1 (bug 1174)
0
Qemux86 Sato
28
0
27
1 (bug 1174)
0
Qemux86 Sato-SDK
34
0
33
1 (bug 1174)
0
Qemuarm Sato
29
0
29
0
0
Qemuarm Sato-SDK
34
0
34
0
0
Qemumips Sato
29
0
29
0
0
Qemumips Sato-SDK
34
0
34
0
0
Qemuppc Sato
21
0
21
0
0
Qemuppc Sato-SDK
26
0
26
0
0
ADT
6
0
5
1 (bug 1466)
0
Core build system
32
0
20
12 (bug 1492, 1493, 1496, 1497, 1498, 1502,1495)
0
Power & Performance
5
0
5
0
0
Compliance
2
0
2
0
0
Stress
3
0
3
0
0
HOB
23
0
22
1 (bug 1480)
0
Total
744
0
723
21
0
Commit Information
---------------------------------------
For Qemux86/Qemux86-64:
Tree/Branch: Poky-contrib/Master_under_test
Commit id: 0e9784d26df51bd564b8f23bd40a6c36969abd5c
Meta Branch: Master-under_test
Commit id: 6e19ec6948f012b588016842d991b336dc848163
For eMenlow/Crownbay/Sugarbay:
Tree/Branch: Poky/1.1_M4
Commit id: bb4a5c44da23a1bb363f1f081cf1644fd7975957
Meta Branch: 1.1_M4
Commit id: 49277afd9e5e510f7b1f82fd8cd10732e3bf2633
For Blacksand/Jasperforest:
Tree/Branch: Poky/Master
Commit id: 92518c5017945d29099b029a7c2bf80261287d6e
Meta Branch: Master
Commit id: 49277afd9e5e510f7b1f82fd8cd10732e3bf2633
For QemuArm/QemuMips/QemuPPC/Beagleboard/Routerstationpro/Mpc8315-rdb:
Tree/Branch: poky-contrib/rc2
Poky Commit: 6e19ec6948f012b588016842d991b336dc848163
Issue Summary
---------------------------------------
Component
Bug Number
Target Milestone
System & Core OS
System Usage
Bug 503 - [emenlow] system cannot enter S3 standby mode
1.1
Bug 1082 - [x86_64] No icons shown on X desktop with sato image
1.0 M2
Bug 1174: [zypper/rpm] package install/removal costs lots of disk space
1.1 M3
Other
Bug 310 - [eMenlow] i2c_transfer error on e-Menlow
1.1
Bug 1188 - [japerforest] I/OAT DMA engine init failed
post 1.1
Bug 1258 -[crownbay] Xorg eats lots of CPU time after standby
1.1 M4
Core build system
New! Bug 1492 - non-GPLv3 build broken with incompatible license for gcc-crosssdk-intermediate
1.1
New! Bug 1495 - [x32] No tclibc-glibc.inc found for x32 build
post 1.1
New! Bug 1496 - [multilib] lib32 build against qemux86 failed during do_rootfs
1.1
New! Bug 1497 - [multilib] lib32 build against qemux86-64 failed during do_rootfs
1.1
New! Bug 1498 - [multilib] lib64 build against qemux86 failed during do_rootfs
1.1
New! Bug 1502 - [multilib] lib64-dpkg is unbuildable for lib64 build
post 1.1
New! Bug 1493 - gcc-cross-canadian set to 4.6 when GCCVERSION is 4.5.1
1.1
Power & Performance
Power consumption of sugarbay and crownbay are 34.81W and 28.11W respectively
Build time for a sato image on Core i7 machine is 124 minutes. Detailed result on https://wiki.yoctoproject.org/wiki/Performance_Test.
Compliance
LTP result: https://wiki.pokylinux.org/wiki/LTP_result
POSIX result: https://wiki.pokylinux.org/wiki/Posix_result
Stress
Both Crashme/Helltest testing on Jasperforest and LTP testing on Beagleboard could pass 24 hours stress testing.
HOB
Bug 1479 - [HOB] deselect non-GPLv3 option not work
1.1
Bug 1480 - [HOB] Could not trigger another build after stop build
1.1
Verified Fixed Bug:
---------------------------------------
1. Bug 1444<http://bugzilla.pokylinux.org/show_bug.cgi?id=1444> - There is no emgd driver when build Crownbay images.
Best Regards,
Jiajun
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110922/fb2bd218/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Yocto 1 1 M4 RC2 detail_testreport-fullpass.ods
Type: application/oleobject
Size: 21924 bytes
Desc: Yocto 1 1 M4 RC2 detail_testreport-fullpass.ods
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110922/fb2bd218/attachment.bin>
More information about the yocto
mailing list