[yocto] kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.

Bruce Ashfield bruce.ashfield at windriver.com
Tue Dec 13 21:13:54 PST 2011


On 11-12-13 6:26 PM, Bodke, Kishore K wrote:
> Yes.
> Its with poky Edison with poky-extras/meta-kernel-dev master branch I am using for my build.

This is likely the problem. I use and test meta-kernel-dev everyday,
but that's always against master. I keep them in lockstep, since
meta-kernel-dev never really 'releases'.

That being said, we can figure out a combination that works. The
best thing to do, would be to remove the kern-tools-native bbappend
from your meta-kernel-dev layer (for now). You don't want the new
tools.

If that doesn't fix the problem, look for merge_log.txt in your
linux/meta/cfg/ directory structure and that will tell us exactly
what is going wrong.

Bruce

>
> Thanks
> Kishore.
>
> -----Original Message-----
> From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com]
> Sent: Tuesday, December 13, 2011 3:25 PM
> To: Bodke, Kishore K
> Cc: Hart, Darren; yocto at yoctoproject.org
> Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.
>
> On 11-12-13 6:17 PM, Bodke, Kishore K wrote:
>> Yeah.  I am using local bare clone for the linux-yocto-3.0 and using poky-extras/meta-kernel-dev in my bblayers.conf for my build.
>> Sorry for not mentioning this before.
>
> Aha. This is completely different then. As Darren mentioned, the bbappend
> should be getting the latest tools, I can look into that.
>
> But to be clear, is this an edison branch + meta-kernel-dev ? That
> will cause problems at some point (and I'm not sure if that is what
> is happening here yet), since recipe updates to use the new tools
> wouldn't be reflected in that branch while you are fed the new tools.
>
> Cheers,
>
> Bruce
>
>>
>> Thanks
>> Kishore.
>>
>> -----Original Message-----
>> From: Hart, Darren
>> Sent: Tuesday, December 13, 2011 3:15 PM
>> To: Bruce Ashfield
>> Cc: Bodke, Kishore K; yocto at yoctoproject.org
>> Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.
>>
>> On 12/13/2011 03:05 PM, Bruce Ashfield wrote:
>>> On 11-12-13 5:50 PM, Bodke, Kishore K wrote:
>>>> Hi,
>>>>
>>>> I get failure for the linux-yoctort_3.0.bb file for the poky Edison branch.
>>>>
>>>> Darren told that it was fixed and merged to master.
>>>
>>> This shouldn't be happening on edison at all. The changes to the
>>> kernel recipes/tools to use the merge_config.sh should never have
>>> showed up in edison. That's yocto 1.2 development work.
>>>
>>> So the fix for this is to find out what leaked into edison and
>>> revert it. I'll have a look at that later tonight.
>>
>> No no. Kishore is using meta-kernel-dev. As such he is getting the
>> latest linux-yocto repository and SRC_REVs. The question, I think, is
>> really why isn't the kern-tools-native bbappend from meta-kernel-dev
>> doing this for him.
>>
>> --
>> Darren
>>
>>>
>>> Bruce
>>>
>>>>
>>>> I wanted to bring to the list about this error message.
>>>>
>>>> ERROR: Function 'do_kernel_configme' failed (see
>>>> /usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.18502
>>>> for further information)
>>>>
>>>> ERROR: Logfile of failure stored in:
>>>> /usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.18502
>>>>
>>>> Log data follows:
>>>>
>>>> | [INFO] doing kernel configme
>>>>
>>>> | [INFO] Branch yocto/standard/preempt-rt/base used by
>>>> common-pc-preempt-rt.scc
>>>>
>>>> | [INFO] collecting configs in ./meta/meta-series
>>>>
>>>> | mv: cannot stat
>>>> `/usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/linux-crystalforest-preempt-rt-build/.tmp.config*':
>>>> No such file or directory
>>>>
>>>> | creation of pre-processed config data failed
>>>>
>>>> | config of yocto/standard/preempt-rt/base (common-pc-preempt-rt.scc) failed
>>>>
>>>> | ERROR: Function 'do_kernel_configme' failed (see
>>>> /usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.18502
>>>> for further information)
>>>>
>>>> NOTE: package
>>>> linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1:
>>>> task do_kernel_configme: Failed
>>>>
>>>> ERROR: Task 716
>>>> (/usr/local/src/yocto_1_1_release/poky/meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb,
>>>> do_kernel_configme) failed with exit code '1'
>>>>
>>>> Waiting for 7 active tasks to finish:
>>>>
>>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>>
>>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>
>>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>
>>>> 3: font-util-native-1.2.0-r2.1 do_configure (pid 14632)
>>>>
>>>> 4: bison-native-2.5-r1 do_configure (pid 20206)
>>>>
>>>> 5: dbus-native-1.4.12-r0 do_configure (pid 20209)
>>>>
>>>> 6: opensp-native-1.5-r2 do_configure (pid 20213)
>>>>
>>>> Waiting for 6 active tasks to finish:
>>>>
>>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>>
>>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>
>>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>
>>>> 3: font-util-native-1.2.0-r2.1 do_configure (pid 14632)
>>>>
>>>> 4: bison-native-2.5-r1 do_configure (pid 20206)
>>>>
>>>> 5: dbus-native-1.4.12-r0 do_configure (pid 20209)
>>>>
>>>> NOTE: package opensp-native-1.5-r2: task do_configure: Succeeded
>>>>
>>>> Waiting for 5 active tasks to finish:
>>>>
>>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>>
>>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>
>>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>
>>>> 3: bison-native-2.5-r1 do_configure (pid 20206)
>>>>
>>>> 4: dbus-native-1.4.12-r0 do_configure (pid 20209)
>>>>
>>>> NOTE: package font-util-native-1.2.0-r2.1: task do_configure: Succeeded
>>>>
>>>> Waiting for 4 active tasks to finish:
>>>>
>>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>>
>>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>
>>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>
>>>> 3: bison-native-2.5-r1 do_configure (pid 20206)
>>>>
>>>> NOTE: package dbus-native-1.4.12-r0: task do_configure: Succeeded
>>>>
>>>> Waiting for 3 active tasks to finish:
>>>>
>>>> 0: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>
>>>> 1: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>>
>>>> 2: bison-native-2.5-r1 do_configure (pid 20206)
>>>>
>>>> NOTE: package acl-native-2.2.51-r2: task do_configure: Succeeded
>>>>
>>>> Waiting for 2 active tasks to finish:
>>>>
>>>> 0: elfutils-native-0.148-r3 do_install (pid 19851)
>>>>
>>>> 1: bison-native-2.5-r1 do_configure (pid 20206)
>>>>
>>>> NOTE: package kbproto-native-1_1.0.5-r0: task do_configure: Succeeded
>>>>
>>>> Waiting for 1 active tasks to finish:
>>>>
>>>> 0: bison-native-2.5-r1 do_configure (pid 20206)
>>>>
>>>> NOTE: package elfutils-native-0.148-r3: task do_install: Succeeded
>>>>
>>>> NOTE: package bison-native-2.5-r1: task do_configure: Succeeded
>>>>
>>>> ERROR:
>>>> '/usr/local/src/yocto_1_1_release/poky/meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb'
>>>> failed
>>>>
>>>> Thanks
>>>>
>>>> Kishore.
>>>>
>>>
>>
>>
>




More information about the yocto mailing list