[yocto] kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.

[Bodke, Kishore K]

Yes. 
Its with poky Edison with poky-extras/meta-kernel-dev master branch I am using for my build.

Thanks
Kishore.

-----Original Message-----
From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com] 
Sent: Tuesday, December 13, 2011 3:25 PM
To: Bodke, Kishore K
Cc: Hart, Darren; yocto at yoctoproject.org
Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.

On 11-12-13 6:17 PM, Bodke, Kishore K wrote:
> Yeah.  I am using local bare clone for the linux-yocto-3.0 and using poky-extras/meta-kernel-dev in my bblayers.conf for my build.
> Sorry for not mentioning this before.

Aha. This is completely different then. As Darren mentioned, the bbappend
should be getting the latest tools, I can look into that.

But to be clear, is this an edison branch + meta-kernel-dev ? That
will cause problems at some point (and I'm not sure if that is what
is happening here yet), since recipe updates to use the new tools
wouldn't be reflected in that branch while you are fed the new tools.

Cheers,

Bruce

>
> Thanks
> Kishore.
>
> -----Original Message-----
> From: Hart, Darren
> Sent: Tuesday, December 13, 2011 3:15 PM
> To: Bruce Ashfield
> Cc: Bodke, Kishore K; yocto at yoctoproject.org
> Subject: Re: kernel-tools failure for linux-yoctort_3.0.bb for poky/edison branch.
>
> On 12/13/2011 03:05 PM, Bruce Ashfield wrote:
>> On 11-12-13 5:50 PM, Bodke, Kishore K wrote:
>>> Hi,
>>>
>>> I get failure for the linux-yoctort_3.0.bb file for the poky Edison branch.
>>>
>>> Darren told that it was fixed and merged to master.
>>
>> This shouldn't be happening on edison at all. The changes to the
>> kernel recipes/tools to use the merge_config.sh should never have
>> showed up in edison. That's yocto 1.2 development work.
>>
>> So the fix for this is to find out what leaked into edison and
>> revert it. I'll have a look at that later tonight.
>
> No no. Kishore is using meta-kernel-dev. As such he is getting the
> latest linux-yocto repository and SRC_REVs. The question, I think, is
> really why isn't the kern-tools-native bbappend from meta-kernel-dev
> doing this for him.
>
> --
> Darren
>
>>
>> Bruce
>>
>>>
>>> I wanted to bring to the list about this error message.
>>>
>>> ERROR: Function 'do_kernel_configme' failed (see
>>> /usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.18502
>>> for further information)
>>>
>>> ERROR: Logfile of failure stored in:
>>> /usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.18502
>>>
>>> Log data follows:
>>>
>>> | [INFO] doing kernel configme
>>>
>>> | [INFO] Branch yocto/standard/preempt-rt/base used by
>>> common-pc-preempt-rt.scc
>>>
>>> | [INFO] collecting configs in ./meta/meta-series
>>>
>>> | mv: cannot stat
>>> `/usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/linux-crystalforest-preempt-rt-build/.tmp.config*':
>>> No such file or directory
>>>
>>> | creation of pre-processed config data failed
>>>
>>> | config of yocto/standard/preempt-rt/base (common-pc-preempt-rt.scc) failed
>>>
>>> | ERROR: Function 'do_kernel_configme' failed (see
>>> /usr/local/src/yocto_1_1_release/poky/build1/tmp/work/crystalforest-poky-linux/linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1/temp/log.do_kernel_configme.18502
>>> for further information)
>>>
>>> NOTE: package
>>> linux-yocto-rt-3.0.4+git1+d05450e4aef02c1b7137398ab3a9f8f96da74f52_1+0936e13cc65d816f1759e2322c5e3fc82a5037f3-r1:
>>> task do_kernel_configme: Failed
>>>
>>> ERROR: Task 716
>>> (/usr/local/src/yocto_1_1_release/poky/meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb,
>>> do_kernel_configme) failed with exit code '1'
>>>
>>> Waiting for 7 active tasks to finish:
>>>
>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>
>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>
>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>
>>> 3: font-util-native-1.2.0-r2.1 do_configure (pid 14632)
>>>
>>> 4: bison-native-2.5-r1 do_configure (pid 20206)
>>>
>>> 5: dbus-native-1.4.12-r0 do_configure (pid 20209)
>>>
>>> 6: opensp-native-1.5-r2 do_configure (pid 20213)
>>>
>>> Waiting for 6 active tasks to finish:
>>>
>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>
>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>
>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>
>>> 3: font-util-native-1.2.0-r2.1 do_configure (pid 14632)
>>>
>>> 4: bison-native-2.5-r1 do_configure (pid 20206)
>>>
>>> 5: dbus-native-1.4.12-r0 do_configure (pid 20209)
>>>
>>> NOTE: package opensp-native-1.5-r2: task do_configure: Succeeded
>>>
>>> Waiting for 5 active tasks to finish:
>>>
>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>
>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>
>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>
>>> 3: bison-native-2.5-r1 do_configure (pid 20206)
>>>
>>> 4: dbus-native-1.4.12-r0 do_configure (pid 20209)
>>>
>>> NOTE: package font-util-native-1.2.0-r2.1: task do_configure: Succeeded
>>>
>>> Waiting for 4 active tasks to finish:
>>>
>>> 0: acl-native-2.2.51-r2 do_configure (pid 12164)
>>>
>>> 1: elfutils-native-0.148-r3 do_install (pid 19851)
>>>
>>> 2: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>
>>> 3: bison-native-2.5-r1 do_configure (pid 20206)
>>>
>>> NOTE: package dbus-native-1.4.12-r0: task do_configure: Succeeded
>>>
>>> Waiting for 3 active tasks to finish:
>>>
>>> 0: elfutils-native-0.148-r3 do_install (pid 19851)
>>>
>>> 1: kbproto-native-1_1.0.5-r0 do_configure (pid 20113)
>>>
>>> 2: bison-native-2.5-r1 do_configure (pid 20206)
>>>
>>> NOTE: package acl-native-2.2.51-r2: task do_configure: Succeeded
>>>
>>> Waiting for 2 active tasks to finish:
>>>
>>> 0: elfutils-native-0.148-r3 do_install (pid 19851)
>>>
>>> 1: bison-native-2.5-r1 do_configure (pid 20206)
>>>
>>> NOTE: package kbproto-native-1_1.0.5-r0: task do_configure: Succeeded
>>>
>>> Waiting for 1 active tasks to finish:
>>>
>>> 0: bison-native-2.5-r1 do_configure (pid 20206)
>>>
>>> NOTE: package elfutils-native-0.148-r3: task do_install: Succeeded
>>>
>>> NOTE: package bison-native-2.5-r1: task do_configure: Succeeded
>>>
>>> ERROR:
>>> '/usr/local/src/yocto_1_1_release/poky/meta/recipes-kernel/linux/linux-yocto-rt_3.0.bb'
>>> failed
>>>
>>> Thanks
>>>
>>> Kishore.
>>>
>>
>
>