[meta-intel] D2800 Support w/NM10 chipset (Cedar Trail)

[Enrico Pelò]

OK!

Many thanks

On 21/01/2019, 13:51, "Burton, Ross" <ross.burton at intel.com> wrote:

    Not really.  If this is a commerical project then I'd recommend hiring
    a consultant.  If its a hobbyist thing then you'll want to copy out
    the driver and kernel recipes from the Danny release of meta-intel,
    copy them into your own layer, change the configuration to use that
    kernel, and see if they build.
    
    To be honest the biggest problem might be finding a copy of the binary
    drivers online...
    
    Ross
    
    On Mon, 21 Jan 2019 at 11:28, Enrico Pelò <enrico.pelo at fastwebnet.it> wrote:
    >
    > Hi Ross,
    > thank you for the fast response.
    >
    > I'm pretty new to the Yocto Project, is there some guides to achieve your advice?
    >
    > Best regards
    > Enrico
    >
    > On 21/01/2019, 12:09, "Burton, Ross" <ross.burton at intel.com> wrote:
    >
    >     Unfortunately the PowerVR drivers for Cedar Trail are binary-only, so
    >     you'll be stuck with compatible kernels.  If I were you I'd take the
    >     drivers and kernel from Danny.
    >
    >     Ross
    >
    >     On Mon, 21 Jan 2019 at 10:52, Enrico Pelò <enrico.pelo at fastwebnet.it> wrote:
    >     >
    >     > Hello to all,
    >     >
    >     > I need to build an image for support that old hardware D2800 Support w/NM10 chipset (Cedar Trail).
    >     >
    >     > I’ll need to install qt5 after the image test.
    >     >
    >     >
    >     >
    >     > I’ve tried to build with BITBAKE THUD’s meta-intel branch with MACHINE=”intel-core2-32” (because the UEFI is not supported by the board)  in my local.conf and the system starts but the video acceleration won’t work, the screen resolution is 640x480
    >     >
    >     >
    >     >
    >     > I’ve configured
    >     >
    >     > LICENSE_FLAGS_WHITELIST="commercial"
    >     >
    >     > in my local.conf
    >     >
    >     >
    >     >
    >     > I’ve founded at this address https://old.yoctoproject.org/downloads/bsps/danny13/cedar-trail-0 that the local.conf must provide
    >     >
    >     > LICENSE_FLAGS_WHITELIST += "license_cdv-pvr-driver_1.0.3"
    >     >
    >     >
    >     >
    >     > But this does not fix the problem.
    >     >
    >     >
    >     >
    >     > I think the problem is that there aren’t the drivers for the PowerVR Graphics.
    >     >
    >     >
    >     >
    >     > Is there a workaround?
    >     >
    >     >
    >     >
    >     > Best regards
    >     >
    >     > Enrico
    >     >
    >     >
    >     >
    >     > --
    >     > _______________________________________________
    >     > meta-intel mailing list
    >     > meta-intel at yoctoproject.org
    >     > https://lists.yoctoproject.org/listinfo/meta-intel
    >
    >
    >