[meta-intel] D2800 Support w/NM10 chipset (Cedar Trail)

[Burton, Ross]

Not really.  If this is a commerical project then I'd recommend hiring
a consultant.  If its a hobbyist thing then you'll want to copy out
the driver and kernel recipes from the Danny release of meta-intel,
copy them into your own layer, change the configuration to use that
kernel, and see if they build.

To be honest the biggest problem might be finding a copy of the binary
drivers online...

Ross

On Mon, 21 Jan 2019 at 11:28, Enrico Pelò <enrico.pelo at fastwebnet.it> wrote:
>
> Hi Ross,
> thank you for the fast response.
>
> I'm pretty new to the Yocto Project, is there some guides to achieve your advice?
>
> Best regards
> Enrico
>
> On 21/01/2019, 12:09, "Burton, Ross" <ross.burton at intel.com> wrote:
>
>     Unfortunately the PowerVR drivers for Cedar Trail are binary-only, so
>     you'll be stuck with compatible kernels.  If I were you I'd take the
>     drivers and kernel from Danny.
>
>     Ross
>
>     On Mon, 21 Jan 2019 at 10:52, Enrico Pelò <enrico.pelo at fastwebnet.it> wrote:
>     >
>     > Hello to all,
>     >
>     > I need to build an image for support that old hardware D2800 Support w/NM10 chipset (Cedar Trail).
>     >
>     > I’ll need to install qt5 after the image test.
>     >
>     >
>     >
>     > I’ve tried to build with BITBAKE THUD’s meta-intel branch with MACHINE=”intel-core2-32” (because the UEFI is not supported by the board)  in my local.conf and the system starts but the video acceleration won’t work, the screen resolution is 640x480
>     >
>     >
>     >
>     > I’ve configured
>     >
>     > LICENSE_FLAGS_WHITELIST="commercial"
>     >
>     > in my local.conf
>     >
>     >
>     >
>     > I’ve founded at this address https://old.yoctoproject.org/downloads/bsps/danny13/cedar-trail-0 that the local.conf must provide
>     >
>     > LICENSE_FLAGS_WHITELIST += "license_cdv-pvr-driver_1.0.3"
>     >
>     >
>     >
>     > But this does not fix the problem.
>     >
>     >
>     >
>     > I think the problem is that there aren’t the drivers for the PowerVR Graphics.
>     >
>     >
>     >
>     > Is there a workaround?
>     >
>     >
>     >
>     > Best regards
>     >
>     > Enrico
>     >
>     >
>     >
>     > --
>     > _______________________________________________
>     > meta-intel mailing list
>     > meta-intel at yoctoproject.org
>     > https://lists.yoctoproject.org/listinfo/meta-intel
>
>
>