[meta-intel] D2800 Support w/NM10 chipset (Cedar Trail)

[Burton, Ross]

Unfortunately the PowerVR drivers for Cedar Trail are binary-only, so
you'll be stuck with compatible kernels.  If I were you I'd take the
drivers and kernel from Danny.

Ross

On Mon, 21 Jan 2019 at 10:52, Enrico Pelò <enrico.pelo at fastwebnet.it> wrote:
>
> Hello to all,
>
> I need to build an image for support that old hardware D2800 Support w/NM10 chipset (Cedar Trail).
>
> I’ll need to install qt5 after the image test.
>
>
>
> I’ve tried to build with BITBAKE THUD’s meta-intel branch with MACHINE=”intel-core2-32” (because the UEFI is not supported by the board)  in my local.conf and the system starts but the video acceleration won’t work, the screen resolution is 640x480
>
>
>
> I’ve configured
>
> LICENSE_FLAGS_WHITELIST="commercial"
>
> in my local.conf
>
>
>
> I’ve founded at this address https://old.yoctoproject.org/downloads/bsps/danny13/cedar-trail-0 that the local.conf must provide
>
> LICENSE_FLAGS_WHITELIST += "license_cdv-pvr-driver_1.0.3"
>
>
>
> But this does not fix the problem.
>
>
>
> I think the problem is that there aren’t the drivers for the PowerVR Graphics.
>
>
>
> Is there a workaround?
>
>
>
> Best regards
>
> Enrico
>
>
>
> --
> _______________________________________________
> meta-intel mailing list
> meta-intel at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-intel