[meta-intel] Unable to install the image on the hard disk

[Mohammad, Jamal M]

It's EFI, Doesn't work with Legacy, since it has bootx64.efi in the first partition.

What is the difference between .hddimg and .wic format.

From: Cal Sullivan [mailto:california.l.sullivan at intel.com]
Sent: Thursday, March 29, 2018 12:09 AM
To: Mohammad, Jamal M <MohammadJamal.Mohiuddin at ncr.com>; meta-intel at yoctoproject.org
Subject: Re: [meta-intel] Unable to install the image on the hard disk

Does your board startup via EFI or legacy BIOS? Try toggling it if you can.

Thanks,
Cal
On 03/27/2018 11:03 PM, Mohammad, Jamal M wrote:
Hi Guys,


1.      Created an minimal yocto image using "bitbake core-image-minimal" command

  1.  Flashed the USB using the dd command.
sudo dd if=tmp/deploy/images/intel-corei7-64/core-image-minimal-intel-corei7-64.hddimg of=/dev/sdb

3.      Clicked on install and typed "sda"

4.      The installation was successful and when I tried to restart by removing the USB Drive, it says "No boot options found. Please install bootable media and restart."

What is the mistake I am doing here.

If I boot from USB, it works and there is no issue, I am able to login into the system. Also after flashing I checked the sda1 sda2 with bootable USB, sda1 has boot partition and sda2 has root partition..

I am trying this on Braswell based board ( Intel Celeron N3160 )

Thanks and Regards,
Jamal




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-intel/attachments/20180329/5e36ddaf/attachment-0001.html>