[meta-intel] Apollo Lake Yocto BSP

[Stephano Cetola]

What board are you booting specifically?

Looking at the UART (serial) output can help to diagnose booting problems.

--S

On 3/22/18 7:51 PM, Mohammad, Jamal M wrote:
> Thanks both of you.. I am now trying the intel website link.. I tried the default master branch of meta-intel with master branch of poky.. Core-image-minimal target was working fine.. But when I booted using core-image-sato target, Yocto Splash screen was displayed and the screen went blank.. What does this mean...
> 
> -----Original Message-----
> From: Tan, Jui Nee [mailto:jui.nee.tan at intel.com] 
> Sent: Friday, March 23, 2018 8:17 AM
> To: Stephano Cetola <stephano.cetola at linux.intel.com>; Mohammad, Jamal M <MohammadJamal.Mohiuddin at ncr.com>
> Cc: meta-intel at yoctoproject.org
> Subject: RE: [meta-intel] Apollo Lake Yocto BSP
> 
> Hi,
> 
> 
> 
> Alternatively, you can refer to this link: https://urldefense.proofpoint.com/v2/url?u=https-3A__www.yoctoproject.org_bsps_jethro203-2Dleaf-2Dhill_&d=DwIGaQ&c=gJN2jf8AyP5Q6Np0yWY19w&r=4h__2a8-7N65qoDnmtsyGh_QYq3kPCn-Loy2L0LHnCs&m=MdWAB4reZSNS7PHk74O08IadCyL8SMfJ6BHORLUNf-A&s=ETjROtUwhwzvGw3-iARW7k4XX01FFTdRd_v9ixkaGJY&e= to get Apollo Lake-i Yocto Project BSP and build the image.
> 
> 
> 
> Thanks,
> 
> Juinee
> 
> 
> 
>> -----Original Message-----
> 
>> From: meta-intel-bounces at yoctoproject.org [mailto:meta-intel-
> 
>> bounces at yoctoproject.org] On Behalf Of Stephano Cetola
> 
>> Sent: Friday, March 23, 2018 1:48 AM
> 
>> To: Mohammad, Jamal M <MohammadJamal.Mohiuddin at ncr.com>
> 
>> Cc: meta-intel at yoctoproject.org
> 
>> Subject: Re: [meta-intel] Apollo Lake Yocto BSP
> 
>>
> 
>> On 3/21/18 9:58 PM, Mohammad, Jamal M wrote:
> 
>>> Does it mean, I cannot use the default meta-intel layer and have to
> 
>> follow the Intel document.
> 
>>>
> 
>>> -----Original Message-----
> 
>>> From: Anuj Mittal [mailto:anuj.mittal at intel.com]
> 
>>> Sent: Wednesday, March 21, 2018 9:12 AM
> 
>>> To: Mohammad, Jamal M <MohammadJamal.Mohiuddin at ncr.com>; meta-
> 
>> intel at yoctoproject.org
> 
>>> Subject: Re: [meta-intel] Apollo Lake Yocto BSP
> 
>>>
> 
>>> On 03/19/2018 07:03 PM, Mohammad, Jamal M wrote:
> 
>>>> Hi Guys,
> 
>>>>
> 
>>>> We have Apollo Lake based board. And want to install Yocto Image. Does
> 
>>>> the meta-intel master branch has BSP Support for Apollo Lake.
> 
>>>>
> 
>>>>            git clone git://git.yoctoproject.org/meta-intel
> 
>>>>
> 
>>>> If not where can I find the BSP Support Layer for Apollo Lake. If yes
> 
>>>> what branch of poky should I use.
> 
>>>>
> 
>>>
> 
>>> You can refer to the BSP documentation here:
> 
>>>
> 
>>> https://urldefense.proofpoint.com/v2/url?u=https-
> 
>> 3A__www.intel.com_content_www_us_en_embedded_products_apollo-
> 
>> 2Dlake_technical-2Dlibrary.html&d=DwID-
> 
>> g&c=gJN2jf8AyP5Q6Np0yWY19w&r=4h__2a8-7N65qoDnmtsyGh_QYq3kPCn-
> 
>> Loy2L0LHnCs&m=4i-KLG-O9Nw8nR9XSeNEt-
> 
>> mY_ykTyzcI8FObTaCjC1k&s=oYpdE6x9YRj3mGzMPnMQ0e1soX035puKW8MxA_6W4nc&e=
> 
>>>
> 
>>> Thanks,
> 
>>>
> 
>>> Anuj
> 
>>>
> 
>>
> 
>> You are welcome to build your own BSP using the meta-intel layer, as it
> 
>> has support for Apollo Lake SoC's. The BSP is intended to make support
> 
>> easier when working with your corporate representative.
> 
>>
> 
>> The published BSPs are also a good reference guide for building your own
> 
>> BSP as they will enable many features that may not be enabled by default
> 
>> in meta-intel.
> 
>>
> 
>> Cheers,
> 
>> Stephano
> 
>> --
> 
>> _______________________________________________
> 
>> meta-intel mailing list
> 
>> meta-intel at yoctoproject.org
> 
>> https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.yoctoproject.org_listinfo_meta-2Dintel&d=DwIGaQ&c=gJN2jf8AyP5Q6Np0yWY19w&r=4h__2a8-7N65qoDnmtsyGh_QYq3kPCn-Loy2L0LHnCs&m=MdWAB4reZSNS7PHk74O08IadCyL8SMfJ6BHORLUNf-A&s=kqZqbjJUqSN2bU9SJh38GQ3Zn9eeL6uCkpTj_qnzpZE&e=
>