[meta-freescale] running 'bitbake fsl-image-mfgtool-initramfs' fails in morty

[Sergeant Peppercorn]

This fails exactly the same way in the imx 4.1.15_1.0.0-ga, branch as well.
Basically, the current morty branch is not able to build an initramfs for
me. Am I missing some dependency or something else dumb that would cause
this to fail this way on two separate and different repositories?  Am I the
only one who has this problem? TIA.

$ bitbake fsl-image-mfgtool-initramfs

    .
    .
    .
| make -f <my bsp morty
base>/build-evk/tmp/work/imx6ulevk-fslc-linux-gnueabi/u-boot-imx-mfgtool/2016.03-r0/git/scripts/Makefile.build
obj=arch/arm/imx-common u-boot.imx
| mkdir -p board/freescale/mx6ul_14x14_evk/
|   arm-fslc-linux-gnueabi-gcc  --sysroot=<my bsp morty
base>/build-evk/tmp/sysroots/imx6ulevk -E
-Wp,-MD,board/freescale/mx6ul_14x14_evk/.imximage.cfg.cfgtmp.d  -nostdinc
-isystem <my bsp morty
base>/build-evk/tmp/sysroots/x86_64-linux/usr/lib/arm-fslc-linux-gnueabi/gcc/arm-fslc-linux-gnueabi/6.4.0/include
-Iinclude  -I<my bsp morty
base>/build-evk/tmp/work/imx6ulevk-fslc-linux-gnueabi/u-boot-imx-mfgtool/2016.03-r0/git/include
-I<my bsp morty
base>/build-evk/tmp/work/imx6ulevk-fslc-linux-gnueabi/u-boot-imx-mfgtool/2016.03-r0/git/arch/arm/include
-include <my bsp morty
base>/build-evk/tmp/work/imx6ulevk-fslc-linux-gnueabi/u-boot-imx-mfgtool/2016.03-r0/git/include/linux/kconfig.h
-D__KERNEL__ -D__UBOOT__ -D__ARM__ -marm -mno-thumb-interwork
-mabi=aapcs-linux -mword-relocations -fno-pic -mno-unaligned-access
-ffunction-sections -fdata-sections -fno-common -ffixed-r9 -msoft-float
-pipe -march=armv7-a -x c -o
board/freescale/mx6ul_14x14_evk/imximage.cfg.cfgtmp <my bsp morty
base>/build-evk/tmp/work/imx6ulevk-fslc-linux-gnueabi/u-boot-imx-mfgtool/2016.03-r0/git/board/freescale/mx6ul_14x14_evk/imximage.cfg
|   ./tools/mkimage -n board/freescale/mx6ul_14x14_evk/imximage.cfg.cfgtmp
-T imximage -e 0x87800000 -d u-boot.bin u-boot.imx
| Image Type:   Freescale IMX Boot Image
| Image Ver:    2 (i.MX53/6/7 compatible)
| Mode:         DCD
| Data Size:    413696 Bytes = 404.00 kB = 0.39 MB
| Load Address: 877ff420
| Entry Point:  87800000
| make[1]: Leaving directory '<my bsp morty
base>/build-evk/tmp/work/imx6ulevk-fslc-linux-gnueabi/u-boot-imx-mfgtool/2016.03-r0/build/mx6ul_14x14_evk_config'
| make: Leaving directory '<my bsp morty
base>/build-evk/tmp/work/imx6ulevk-fslc-linux-gnueabi/u-boot-imx-mfgtool/2016.03-r0/git'
| cp: cannot stat '<my bsp morty
base>/build-evk/tmp/work/imx6ulevk-fslc-linux-gnueabi/u-boot-imx-mfgtool/2016.03-r0/build/mx6ul_14x14_evk_config/u-boot.img':
No such file or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at <my bsp morty
base>/build-evk/tmp/work/imx6ulevk-fslc-linux-gnueabi/u-boot-imx-mfgtool/2016.03-r0/temp/log.do_compile.15628)
ERROR: Task (<my bsp morty
base>/sources/meta-freescale/recipes-bsp/u-boot/u-boot-imx-mfgtool_2016.03.bb:do_compile)
failed with exit code '1'
NOTE: Tasks Summary: Attempted 898 tasks of which 258 didn't need to be
rerun and 1 failed.
NOTE: Writing buildhistory

Summary: 1 task failed:
  <my bsp morty
base>/sources/meta-freescale/recipes-bsp/u-boot/u-boot-imx-mfgtool_2016.03.bb:
do_compile
Summary: There were 7 WARNING messages shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20180626/052a6145/attachment.html>