[meta-freescale] How to start with configuring drivers for i.mx

[Mattis Asp]

You need to source the correct environment variables to be able to find
bitbake.
Have a look at your root folder of where you initialized the project. write
$ source setup-environment
If it's not executable add it as executable using $ chmod u+x
setup-environment.
That should be it.

On 14 March 2018 at 12:08, Abhey Singh Kanwar <abhey.singhkanwar at nxp.com>
wrote:

> Dear concerned,
>
>
>
> I have recently started working with I.mx8xqxp. We are developing a MIPI
> CSI2 to USB3.0 solution using i.MX8QXP customized for automotive radar use.
> Our radar products transmit raw ADC data over MIPI CSI2 interface and we
> are using the i.MX8QXP to receive the radar data to send this to PC over
> USB3.0. We plan to use this solution for data acquisition/radar validation
> in PL ADAS labs
>
>
>
> I am new to both Linux and Yocto project and need help. I have managed to
> deploy the image on the hardware and boot it but I am unable to proceed
> further and totally confused.
>
>
>
> I have tried using   source /opt/poky/…but my opt dir is empty so I
> thought installing tool chain image  bitbake meta-toolchain would solve
> but my terminal cannot find bitbake command
>
>
>
> I would like to configure my i.mx board as a mass storage device to test
> its actual usb 3.0 speed for which there are drivers already available but
> I don’t know how to proceed with them. Can you please tell me or provide a
> short guide on how to use/add these drivers.
>
>
>
> Best Regards,
>
> *Abhey Singh Kanwar*
>
> Intern
>
>
>
> NXP Semiconductors Germany GmbH
>
> PL ADAS, BL Car Infotainment & Driver Assistance
>
> Schatzbogen 7
>
> 81829 Munich, Germany
>
> *Office:* +49(0)89-92103811
>
> *Email:* *abhey.singhkanwar at nxp.com <abhey.singhkanwar at nxp.com>*
>
>
>
>
>
> Geschäftsführung: Ruediger Stroh (Vors.), Frans Scheper, Kurt Sievers,
> Erik Just-Wartiainen, Achim Kempe / Aufsichtsratsvorsitzender: Gernot
> Fiedler / Sitz: Hamburg /
>
> Registergericht: Hamburg HRB 84 865
>
>
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
>


-- 
Mvh/Best regards
Mattis Spieler Asp
Tel: +47 412 44 648
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20180411/69a2ef98/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 9713 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20180411/69a2ef98/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 299 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20180411/69a2ef98/attachment-0001.png>