[meta-freescale] pico-imx7d bluetooth support?

[Vanessa Ayumi Maegima]

Hi Takashi,

On Wed, Nov 29, 2017 at 6:43 AM, Takashi Matsuzawa <tmatsuzawa at xevo.com> wrote:
> Hello, I learned a bit.
>
> So, for this BCM4339 (correct?) to work for Bluetooth also, WiFi need to be
> properly working anyway.
>
> ________________________________
> From: Takashi Matsuzawa
> Sent: Wednesday, November 29, 2017 11:43 AM
> To: meta-freescale at yoctoproject.org
> Subject: Re: pico-imx7d bluetooth support?
>
>
> OK, I cannot see uart7 (Bluetooth) in mainline source, which is present in
> TN source tree.
> I imagine, at least u-boot update is necessary to enable Bluetooth on this
> board with mainline kernel.
>
> ________________________________
> From: Takashi Matsuzawa
> Sent: Wednesday, November 29, 2017 1:36 AM
> To: meta-freescale at yoctoproject.org
> Subject: pico-imx7d bluetooth support?
>
>
> Hello.
>
> I can see WiFi support for this board (by brcmfmac driver and firmware) is
> currently being looked at.
> Then, what is the status of bluetooth support?
>
> Looking into the chip spec, though both of WiFi and Bluetooth are supported
> by single chip, Bluetooth is accessed through UART whereas WIFI is through
> SDIO.
> So, I this means separate driver is needed to enable Bluetooth.
>
> Is it already there (and I just need to enable e.g. kernel configuration
> option), or some additinoal work is needed.
>
> My concern is that I cannot use BT-USB dongle for this board since I want to
> use its only USB port (USB-C) for other purposes, so I rather need to use
> internal Bluetooth chip.
>
>
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>

No bluetooth support for imx7d-pico-pi on this project yet.
I am still working on Wifi and I will try to add BT when Wifi is functional.

Thanks!

Regards,
Vanessa