[meta-freescale] Updates to meta-freescale-3rdparty (master and rocko) in 2017-11-08
otavio.salvador at gmail.com
otavio.salvador at gmail.com
Wed Nov 8 08:16:49 PST 2017
Hello,
I pushed following updates:
commit 3fc4458fd822a7b3843bc69732367b717947e76b (HEAD -> master, fslc/rocko, fslc/master-next, fslc/master)
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:14 2017 +0100
colibri-vf.conf: add a wic image in favour of sdcard image
The wic image can be used to boot kernel/dtb/rootfs from an SD card.
U-Boot gets booted from the on module NAND, the image from the prepared
SD card.
zcat XXX.rootfs.wic.gz | dd of=/dev/sdX bs=1M
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 26bec0011df51990348cac6c243263d5770b4874
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:13 2017 +0100
colibri-vf.conf: add a device tree for the aster carrier board
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit c44904d9c8854cdddd0544ded79986bd81a69b58
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:12 2017 +0100
colibri-imx7.conf: add a wic image in favour of sdcard image
The wic image can be used to boot kernel/dtb/rootfs from an SD card.
U-Boot gets booted from the on module NAND, the image from the prepared
SD card can be started with 'run sdboot'.
zcat XXX.rootfs.wic.gz | dd of=/dev/sdX bs=1M
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 9202f5fa7fbec71fb6019d96c6c83f2e84d72c77
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:11 2017 +0100
colibri-imx7.conf: add device tree for the aster carrier board
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 0b9af1e0598c26f762963bff82e03f7ccc7243db
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:10 2017 +0100
colibri-imx6.conf: add a wic image in favour of sdcard image
The wic image can be used to boot kernel/dtb/rootfs from an SD card.
U-Boot gets booted from the on module eMMC, the image from the prepared
SD card can be started with 'run sdboot'.
zcat XXX.rootfs.wic.gz | dd of=/dev/sdX bs=1M
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 8e30e894541de3889949de3d3cc3ab4a8b9e09fd
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:09 2017 +0100
colibri-imx6.conf: add device trees for aster and use-mainline-bsp
Add a device tree for the Aster carrier board.
Add the device tree available in mainline for use with the
use-mainline-bsp override.
While at it unify the @SOC description variable with other boards.
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit f5707489520f46837cd8fc447d7e9c750e9d4a1a
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:08 2017 +0100
colibri-imx6.conf: do not deploy the kernel in the rootfs
The kernel is taken from a separate fat partition in the regular
boot process, so there is no need to deploy it in the rootfs.
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 5e2b946de0dbd69f9b21f87685cb781ccbec729f
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:07 2017 +0100
colibri-imx6.conf: build a spl u-boot
U-Boot is now used with SPL, set the machine conf file accordingly.
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit c0036cd7464c0fa3b0aa31d62a7e786d1eb2a203
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:06 2017 +0100
apalis-imx6.conf: add a wic image in favour of sdcard image
The wic image can be used to boot kernel/dtb/rootfs from an SD card.
U-Boot gets booted from the on module eMMC, the image from the prepared
SD card can be started with 'run sdboot'.
zcat XXX.rootfs.wic.gz | dd of=/dev/sdX bs=1M
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit bbc134ef5d52e5c19e5a14342a48e111ba784e9c
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:05 2017 +0100
apalis-imx6.conf: add device trees for ixora and use-mainline-bsp
Add a device tree for the Ixora carrier board.
Add the device tree available in mainline for use with the
use-mainline-bsp override.
While at it unify the @SOC description variable with other boards.
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit e1e53bf54491227a8b9345629d09c3d72244a750
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:04 2017 +0100
apalis-imx6.conf: do not deploy the kernel in the rootfs
The kernel is taken from a separate fat partition in the regular
boot process, so there is no need to deploy it in the rootfs.
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit b5f9ee90d80223cfd2a86c124e5ee636d143611f
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:03 2017 +0100
apalis-imx6.conf: build a spl based u-boot
U-Boot is now used with SPL, set the machine conf file accordingly.
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 022d9c66729e9e3b6fa41bcdf77d1c0dd016e88f
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:02 2017 +0100
u-boot-toradex: update to 2016.11, update to toradex bsp 2.7.4
For the i.MX6 based modules move to boot with SPL to setup the DDR RAM.
Add use-mainline-bsp to compatible machine to allow building this U-Boot
also when 'use-mainline-bsp' is built. (In which case the e.g. mx6 override
is dropped)
License: changed by the following upstream commits, all of which do not
affect our configurations.
0f4d2f8e79 License: Add the Open Font License
(ttf fonts)
40a39e875c SPDX: add X11 SPDX-License-Identifier
(preparation for dual licensed device trees)
4dcd9a65d4 Licenses: fix a typo in README
changes to non NXP boards not in list
initial commits for colibri-imx6ull and colibri-imx7-emmc not in list
69cc681 lib/bch.c: modify algorithm for all writebcb users
595c178 mtd: nand: mxs_nand: support chips without ONFI/JEDEC parameter page
d5efded apalis/colibri_imx6: fix white space
cd255bc colibri_imx7: get rid of environment in mmc option
ca92211 colibri_imx7: clean-up config header file
ae968c6 apalis/colibri: fix and synchronize mount options
4370811 colibri_imx7: improve DDR3 timing
7e64e5f toradex: remove ISO partition support
16d2bc5 disk: part: align buffer so it can be used with DMA enabled drivers
84fe4a7 MLK-13140 ARM: imx: update REFTOP_VBGADJ according to fuse setting
1d86d85 MLK-13124 ARM: imx: update the REFTOP_VBGADJ setting
756bc8f imx6ull: cherry-pick remaining stuff from 05922b0
ab546ab MLK-12766 net: fec: do not access reserved register for i.MX6ULL
09983d0 MLK-12486-1: switch to use setup_gpmi_io_clk for i.MX6UL
6d6a643 MLK-12883 usb: limit USB_MAX_XFER_BLK to 256
4e1c703 tdx-cfg-block: add new sku's
6bd94c8 colibri_imx7: remove unused config option
ab71667 colibri_imx7.h: do not deploy nand torture cmd
341064e net: Use packed structures for networking
c0d5002 configs: apalis-tk1: Use ext4 file system by default
51b53b4 colibri-vf: sync the board info message
3e72538 toradex: common: unify behaviour when config block is missing
3ef2146 colibri_imx6: use SDP if USB serial downloader has been used
4fcacc1 apalis_imx6: use SDP if USB serial downloader has been used
80c3bd6 imx_common: detect USB serial downloader reliably
0d06911 imx: add macro to detect whether USB has been initialized
a2e77a6 colibri_imx7: use SDP if USB serial downloader has been used
e05589d imx: imx7: detect USB serial download protocol boot mode
3f4cddb imx: imx7: make get_boot_device available for board files
23b5f7c colibri_imx7: carve out PMD aligned amount of memory
47ac8bf toradex: configblock: add an -y parameter to 'cfgblock create’
cb3d672 configs: apalis_imx6: Use ext4 file system by default
615de72 configs: colibri_imx6: Use ext4 file system by default
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 85b9830c91310f8e10b0ec68c76efdd69739f03b
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:01 2017 +0100
linux-toradex_4.1-2.0.x: imx, update to toradex bsp 2.7.4
Update the kernel for a fslc-imx 4.1-2.0.x based kernel for Apalis/Colibri iMX6
and Colibri iMX7.
This replaces the linux-toradex_3.14.52 and linux-toradex_4.1.15 kernels, thus
remove the recipes and their related files.
Add a superset of the machine specific defconfigs in the kernel tree as the
defconfig.
The following changes on top of fslc "Merge tag 'v4.1.39' into 4.1-2.0.x-imx":
- Patches for bsp 2.7.3 as listed below
- Merge to upstream patchlevel fslc/4.1-2.0.x-imx @ 4.1.44
- Patches for bsp 2.7.4 as listed below
- Added initial support Colibri iMX6ULL and Colibri iMX7 Dual 1GB (eMMC)
without the machine specific device-trees or defconfigs commits.:
with bsp 2.7.4
* b893ccb toradex defconfigs: synchronize with defconfigs in oe
* 3e11eb1 colibri_imx7_defconfig: add atmel-mxt-ts as a module
* f5f2907 ARM: dts: imx7-colibri: add atmel mxt multitouch controller
* e747c0e ARM: dts: colibri-imx7: add new gpio hog grp
* 269dba3 colibri_imx6_defconfig: add atmel-mxt-ts as a module
* b9aae76 ARM: dts: imx6dl-colibri: add atmel mxt multitouch controller
* de3fd44 apalis_imx6_defconfig: add atmel-mxt-ts as a module
* 98b9c18 ARM: dts: imx6qdl-apalis: add atmel mxt multitouch controller
* bce5146 ARM: imx: clk: enable OCOTP clock by default
* d96c255 imx6ull.dtsi: include all needed definitions
* c8f0033 mtd: gpmi: fsl,legacy-bch-geometry independent of nand-on-flash-bbt
* 7b02a99 imx: Fix 'Expose SoC unique ID' for newer i.MX6
* 4e35498 imx6dl-colibri-eval-v3: fix weim node
* 090138a regulator: pfuze100: Apalis iMX6: Fix poweroff does not release POWER_ENABLE_MOCI
* c4d5e86 apalis_imx6: update defconfig for wifi
* 837a89e ip6_offload: fix compiler warning
* 4105f39 of: fdt: fix compiler warning
* 4b20a89 mtd: blkdevs: fix switch-bool compilation warning
* c595a9e mtd: fsl-quadspi: fix macro collision problems with READ/WRITE"
* 6fe6616 Revert "mtd: fsl-quadspi: fix macro collision problems with READ/WRITE"
with bsp 2.7.3
* 3f68dc7 busfreq-imx: only use existing global variables
* 22eb8a9 Revert "cpufreq: imx7: fix undefined reference to arm_reg and soc_reg"
* 38524d7 Documentation: fix imx7d pinctrl dse config bits
* 71d7b33 imx7d-colibri: limit to 800 mhz and 1 ghz operating points
* b339205 imx7s: add mandatory 800 mhz operating point
* 22db6be video: fbdev: mxsfb: allow setting display timings via kernel command line
* a6563bd cpufreq: imx7: fix undefined reference to arm_reg and soc_reg
* 9262956 dts: imx7d: move operating points to i.MX 7Dual device tree
* 50e26af mxc_ipuv3_fb: Use the mode_string from command line as is
* d826eb4 ov5640_mipi: Revert the hack
* a5c56b9 ARM: dts: imx6qdl-apalis-ixora: Enable ADV7280 decoder on Ixora
* b8e5d21a tty: serial: imx: Add support for enabling RS485 via device tree
* a8e0d43 ARM: imx: spare the first 16KiB of OCRAM_S for Cortex-M4
* a2130af sgtl5000: improve switch on vag power for line_in -> output
* b48a96a ARM: dts: colibri imx6: configure an external sgtl5000 vddd source
* d21fcda ARM: dts: apalis imx6: configure an external sgtl5000 vddd source
* 40fbb01 ARM: dts: colibri imx6: increase sgtl5000 lrclk drive strenght
* 87f6630 ASoC: sgtl5000: Allow LRCLK pad drive strength to be changed
* 1a3c9b3 ASoC: sgtl5000: add headphone and LINEOUT mute controls
* 8929d0a sgtl5000: add Lineout volume control
* 81fba3f ASoC: sgtl5000: Do not disable regulators in SND_SOC_BIAS_OFF
* 66a04e9 ASoC: sgtl5000: Disable internal PLL early
* 85436af ASoC: sgtl5000: Initialize CHIP_ANA_POWER to power-on defaults
* 51bc42e ASoC: sgtl5000: Write all default registers
* 4523526 ASoC: sgtl5000: Fix regulator support
* 4859c2e90 ASoC: sgtl5000: Remove misleading comment
* abbdc0a ASoC: sgtl5000: fix VAG power up timing
* 198628d ASoC: sgtl5000: fix error message output for MicBias voltage
* 912e038 ASoC: sgtl5000: Replace direct snd_soc_codec dapm field access
* ae56e9d ASoC: sgtl5000: Calculate Lineout Channel Output Level
* 3db63e2 ASoC: sgtl5000: Use specific variable for lo_vag
* f972815 net: can: flexcan: Fix wakeup on CAN from suspend issue
* b6798bb iio: adc: remove event advertisment
* 7a751b2 iio: adc: support IIO_CHAN_INFO_SCALE
* 051ee1a1 apalis-imx6: use stopmode for poweroff
* 8949147 pm-imx6.c: fix power off by stop mode
* 29ff238 colibri-imx6: use stopmode for poweroff
* 94a53ed net: fec: don't transfer ownership until descriptor write is complete
* c15a4c3 rtc: ds1307: support m41t0 variant
* 3e3ea9b sgtl5000: switch on vag power for line_in -> output
* 091594e iio: adc: fix remove
* 4bac3c9 mmc: sdio: add forward declaration for struct mmc_host
* a86db1f ARM: imx: mu: let Cortex-M4 know about A7 state
* 98adbba ARM: imx: clk: do not force clock frequency of M4
* 9e05354 ARM: imx: busfreq: do not force high frequency during suspend
* 70f901b ARM: imx: busfreq: initialize M4 frequency depending boot state
* 3e92301 ARM: imx: busfreq: request bus frequency depending on M4 clock
* 0666dae arm: dts: imx7: specify Cortex-M4 clock
* c663470 mmc: sdhci-esdhc-imx: make sure runtime PM is suspended in system suspend
* 2df675a mtd: gpmi: make sure runtime PM is suspended in system suspend
* ebf4565 video: fbdev: mxsfb: make sure runtime PM is suspended in system suspend
* a2ccbd2 net: fec: make sure runtime PM is suspended in system suspend
* 5ced941 imx_thermal.c: set trip point depending on temp grade
* 9090b5b imx: Expose SoC unique ID
* 8a098f2 drivers: soc: Add new sysfs attribute to expose SoC unique ID
* 36df4e2 arm: dts: imx7: specify keypad port clock
* 7b51b63 ARM: imx7d: clk: add root clock for keypad port
* 506993e rpmsg: use _debug variants for print_hex_dump
* 5aba75e rpmsg: imx: do not push data when no reader is available
* cade8f64 hexdump: do not print debug dumps for !CONFIG_DEBUG
* 1db9a16 ARM: imx: define buffer count per VirtIO queue
* 4cfa939 gpio: mxc: clear interrupt mask/status optionally
* 25b9f89 ARM: imx: remove 'unused' warning
* 257fabb tty: serial: imx: disable DCD and RI interrupts
* c784a4d imx6qdl.dtsi: include bindings gpio.h
* 735d4f8 video: mxc: ldb: Add support for LVDS configuration via kernel boot arguments
* 558d378 colibri_imx6:Add MCP2515 SPI CAN controller to DT
* 7df8a0f media: Add support for ADV7280 decoder driver
* 358a46a mxc_v4l2_capture: Change error message to print on debug
* 80aae0b mxc_v4l2_capture: Allow clock setting for de-interlaced video input
* 0d85191 tty: serial: imx: disable DCD and RI interrupts
* 8ddc702 PCI: Apalis GEN1 forcing quirk
* 826486c PCI: imx6: fix PCIe EP device self-initialisation
* e00c546 process.c: if power off fails, do at least a halt
* be63e27 Input: sentelic - use "static inline" instead of "inline"
* b28f212 mxc_v4l2_capture.c: make error messages unique
* d7357aa ipu_csi_enc.c: fix debug print
* 4e1e8d2 max9526.c: move pinctrl after i2c detect
* 638f43c adv7180.c: convert debug output to dev_dbg
* 67c0d5a2 dtb, i2c-imx.txt: fix typos
* 1ce23b6 mxc_v4l2_capture: match ipu/csi/mipi instead of only ipu/csi
* c5954c2 max9526: add initial MXC camera sensor code
* df76b16 adv7180.c: initial working adv7180 settings
* 518d4ee mxc_v4l2_capture: let the camera driver set mipi/parallel
* 62785df pci-imx6: fix reboot bug
* d2e0de0 mxc_hdmi.c: fix boot hang
* cec9878 extcon: usb-gpio: increase debounce time
* 1fe0cf4 mxc_lcdif.c: fix comment
* 912f823 mxc_v4l2_capture: add mxc_camera_common_lock/unlock, fix device name
* 502376a MXC_CSI_CAMERA: select VIDEOBUF2_DMA_CONTIG
* 691204a clk-imx6q.c: set eth phy clock dependent on RMII/RGMII
* bea0575 mach-imx6q.c: handle RESET_MOCI when PCIe is disabled
* 78d5ad8 mxc_hdmi.c: remove compiler warning
* 2d67c55 mxc_hdmi: fix detect disconnect case
* b34325c OmniVision ov5640 MIPI-CSI2 camera support
* b548028 i2c-imx: add gpio recovery functionality
* fc0d0a2 pcie-imx6: improve reset function for reseting EP
* 557f0276 pcie-imx6: add reset function for reseting downstream EP
* b0e8865 mach-imx6q.c: fix typo in error msg
* 0bcaad8 mxc_vdacif.c: add second parallel output used for VDAC
* f069491 pci-imx6.c: add config option to force GEN1 speed
* e4d913a iio:stmpe-adc.c: Switch to new event config interface
* af6cf45 vgaarb.c: demote pr_err about vga device to pr_debug
* 4e6509c mxc_lcdif.c: add additonal LCD timings
* 849f2e7 pci-imx6.c: remove compiler warning
* 85aff64 mxc_lcdif.c: EDT-WVGA: fix pixelclk polarity
* f6620779 mxc_hdmi: skip unnecessary mxc_hdmi_setup calls
* c73cb81 sync.h: synchronization framework needs this header
* d39b4cf arm: imx6: fix pcie by disabling rc/ep test mode
* 7435612 stmpe-adc: add temperature channel
* 6f88e1d stmpe-adc: add device tree bindings
* 6b542ac iio: adc: add STMPE ADC driver using IIO framework
* d5c4b1b mfd: stmpe: add ADC block resources
* 3b99e8c mach-types: add the apalis-imx6 machine
* 6a315fa lcd: Add WVGA timings for the EDT 7.0" panel
* 6ff9133 mxc_spdif.c: set the validity bit to 'valid'
* 25c2bbc eMMC: Don't initialize partitions on RPMB flagged areas.
* d2aa5b3 tc358743_h2c: add devicetree support
* 97662d8 TC358743 Kconfig dependency update
* e966a0b tc358743_h2c: fill in sample edid data from Asus monitor
* fa98ab8 tc358743_h2c: fix compiler warnings
* 1ae41be tc358743_h2c: cleanup spacing
* cb8232e add tc358743_h2c driver
* 3bb87f2 sdhci: print opcode/retries on timeout error
* a26957b ov5640_mipi: software reset does not affect i2c address
* f157011 ipu_common: ipu_free_irq, do nothing if not owner
* 916ed1f ipu_csi_enc: improve error message
* 439ea46 ipu_prp_enc: improve error message
* cd35b25 ov5642: fix csi/ipu check for imx6dl
* 388605f ov5640_mipi: fix csi/ipu check for imx6dl
* 07bd62d ov5642: add i2c address change feature
* 73924ed0 ov5640_mipi: add i2c address change feature
* 12749a2 mxc_mipi_csi2: add ipu/csi info to probed output
* 9ffb829 ov5640_mipi: change registered name from ov5640 to ov5640_mipi to reduce confusion
* 98963d0 i.MX6: v4lout: none of our displays support color-space conversion
* f657dc3 dma-mapping: increase DEFAULT_DMA_COHERENT_POOL_SIZE ifdef CONFIG_VIDEO_TW68
* 41feae5 PCI: Add quirk for setting valid class for TW6869 frame grabber
* d69533a mxc_hdmi: Add only_cea parameter to mxc_hdmi module
* 5969e2c rfkill-regulator: add dt support
* 66d9883 ov5640_mipi: simplify mipi clock wait loop
* 04abce7 mxc_hdmi: enable overflow interrupt after initialization complete
* de5231f mxc_hdmi: default to keep-alive (don't detect disconnect)
* 51394b5 Add support for DVI monitors
* 4898869 ov5640_mipi: print message on gpio request failure
* e2954c5 mxc_v4l2_capture: add ipu_id to sensor_data
* af79b8b ov5640_mipi: add remove *2 and add error checking to OV5640_get_sysclk
* a03ab41 ov5640_mipi: add imx6 mipi/parallel selection
* 4f704da ov5640: add pwm option for mclk
* 81cf941 ov5642: add imx6 mipi/parallel selection
* ede1722 fix camera power down
* 6c4f140 add ar1021 touchscreen
* bc387b6 mxc_v4l2_capture: fix VIDIOC_ENUMSTD, return -EINVAL if index > 0
* 89a914b mxc_ipuv3_fb: unblank displays at init
* a1b1b16 ARM: imx: adjust vring location to be at 256MB boundary
* 8227a8a arm: dts: imx7: decrease DMA CMA to 128MB
* 4af562c ARM: imx7d: clk: add 240MHz sys main clock to init_on
* 1f43d37 usb: chipidea: Use extcon framework for ID and VBUS detection
* 24bd9a5 arm: dts: imx7: Add support for PWM polarity control
* e32dd66 pwm: imx: Add support for polarity control
* 10a6f7d cpufreq: imx7: don't support OPP table from platform data
* 46c52bd video: fbdev: mxsfb: honor native-mode
* b03cdd9 video: mxsfb: simplify parsing
* f3d8abf Revert "sgtl5000.c: HACK, defer probe when I2C not yet running"
* 967986f touchscreen: fusion_F0710A: Reset controller if clear interrupt operation fails
* d4afe65 input: touchscreen: fusion: implement multitouch with slot handling
* 5be4f48 input: touchscreen: fusion: use level triggered interrupt
* fbfa23b input: touchscreen: fusion: add device tree integration
* 02411ee input: touchscreen: fusion: platform independent GPIO description
* fd92393 input: touchscreen: fusion: fix error handling
* 808f8b9 input: touchscreen: fusion: use new I2C PM functions
* ef32550 input: touchscreen: added platform data for Fusion touchscreen
* 3e2c068 input: touchscreen: fix race condition in Fusion driver
* ac9343d input: touchscreen: add ABS_X/ABS_Y axis for Fusion touchscreen
* a9fc7d5 input: touchscreen: add Fusion 7 and 10 multi-touch driver
* e2d1fdb fbcon: logo: allow easy integration of a custom Linux boot logo
* 49f0b58 spi: spidev: invent a new hw device to work around spidev warning
* bcdfec9 ARM: imx: fix clock for i.MX 7 when Cortex-M4 is running
* 8693a14 pinctrl: pinctrl-imx: add support for LPSR GPR padctrl
* ea2ea01 mfd: rn5t618: register restart handler
* a7b0e5f mfd: add Ricoh RN5T567 PMIC suppport
* 675e67c drivers/dma/Kconfig: allow MXS_DMA for i.MX 7
* d68621a regulator: rn5t618: allow GPIO 0 to be used for an enable signal
* f0e41d7 ENGR00305648-1 ASoC: imx-sgtl5000: Support non-ssi cpu-dai
* f992a95 video: fbdev: mxsfb: fix pixelclock polarity
* d46df08 mach-imx7d.c: use enet_out clk to decide on PHY clock
* 68bf174 Input: ad7879 - add device tree support
* 63339e0 Input: ad7879 - fix default x/y axis assignment
* d1a439e Input: ad7879 - move header to platform_data directory
* 0adde3f ARM: imx: enet1: output reference clock
* 633a4e1 video: mxsfb: add compile dependencies
* f4c63ec chipidea: make usb charger optional
* c8b53a4 regulator: rn5t618: Add RN5T567 PMIC support
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
commit 51fc09ef08ef1579b6ff2096d860c656bf94ec8a
Author: Max Krummenacher <max.oss.09 at gmail.com>
Date: Wed Nov 8 16:54:00 2017 +0100
linux-toradex_4.4: vf, update to toradex bsp 2.7.4
- Merge to upstream patchlevel Linux 4.4.88
- Add Remote Processor Messaging (rpmsg) driver for Vybrid
- Various other additions and fixes
- Synchronize defconfig with kernel tree colibri_vf_defconfig
Apart from the upstream patches the following commits were added:
with bsp 2.7.4
* d152ae9 drm/panel: Add display timings for Logic LT161010-2NHC 7" panel
* a8c098d colibri_vf_defconfig: add atmel-mxt-ts as a module
* 274ea53 ARM: dts: vf-colibri: add Atmel MXT multitouch controller
* dd2a698 ARM: dts: colibri-vf: add new gpio hog grp/s
* 2829153 usb: chipidea: use of extcon framework to work for non OTG case
* 1721e2f usb: chipidea: Consolidate extcon notifiers
* de6cb89 Revert "usb: chipidea: Modify use of extcon framework to work for non OTG case"
with bsp 2.7.3
* c1d5fe2 Merge tag 'v4.4.73' into toradex_vf_4.4-next
* 0068a1b ARM: dts: vf-colibri-aster: Add support for Aster with Vybrid
* f37e832 ARM: vf610: PM: Use device tree property to register power_off function
* 3348e45 tty: serial: fsl_lpuart: fix del_timer_sync() vs timer routine deadlock
* f9fc0f2 ARM: dts: imx: fix M41T0 RTC compatible string
* 41e7fd5 rtc: ds1307: support m41t0 variant
* 7cfa321 tty: serial: fsl_lpuart: lock port on console write
* 00babbc ARM: dts: colibri-vf: use pull-down for USBC_DET pin
* 8b06b41 tty: serial: fsl_lpuart: resync with 4.9 kernel
* 837e5b8 Merge tag 'v4.4.59' into toradex_vf_4.4-next
* 418f717 net: fsl_l2_switch: cleanup in remove callback
* 86b0182 net: ethernet: freescale: allow vf610_l2_switch as module
* fa64e12 net: fsl_l2_switch: drop registering phy in switch mode
* cd2eb96 Merge tag 'v4.4.39' into toradex_vf_4.4-next
* 56ffbfa spi: spi-fsl-dspi: Purge switch between EOQ and DMA mode
* 90b6d21 ARM: dts: vfxxx: Enable DMA for DSPI2 and DSPI3
* e2d03ba spi: spi-fsl-dspi: Fix incorrect freeing of DMA allocated buffers
* 9b02266 spi: spi-fsl-dspi: Fix continuous selection format
* 529dcc0 spi: spi-fsl-dspi: Fix incorrect DMA setup
* de55e33 spi: spi-fsl-dspi: Fix SPI transfer issue when using multiple SPI_IOC_MESSAGE
* 3356fd1 spi: spi-fsl-dspi: Fix data corruption for 1K transfers or more
* e1ce49e drm/fsl-dcu: introduce kernel parameter to specify fbdev depth
* 93fb63a ARM: configs: colibri_vf: configure IPv6 SIT driver as module
* 4a8d085 sdhci-esdhc-imx: fix bus-width for 1-bit operation.
* 3816bd7 ARM: vf610: PM: register power_off function
* 7ccb5e5 usb: chipidea: implement platform shutdown callback
* 1cb2765 drm/fsl-dcu: disable CRTC gracefully
* 9e4d484 net: fec: align IP header in hardware
* 6a18208 Input: colibri-vf50-ts: disable IRQs on close
* a650cbf tty: serial: fsl_lpuart: Fix Tx DMA edge case
* 64086f8 drm/fsl-dcu: enable pixel clock when enabling CRTC
* 44108d4 drm/fb_cma_helper: Remove implicit call to disable_unused_functions
* 01a613e drm/fsl-dcu: do not transfer register in mode_set_nofb
* ab74a917 drm/fsl-dcu: do not explicitly transfer registers on plane init
* b385ffb drm/fsl-dcu: enable TCON bypass mode by default
* 7ecc29c ARM: dts: vfxxx: Include support for dspi[23] functionality.
* 95bb750 drm/fsl-dcu: implement lastclose callback
* 5f0a2c4 rpmsg: vf610_rpmsg: check for error pointer
* a47f6f42 char: vf610_sema4: use macro to register driver
* a5a7e6d char: vf610_sema4: improve error handling
* fa359d7 pinctrl: freescale: avoid overwriting pin config when freeing GPIO
* 624f65b i2c: imx: defer probe if bus recovery GPIOs are not ready
* 2e02dcb i2c: imx: make bus recovery through pinctrl optional
* 25ae853 ARM: vf610: PM: initialize suspend to memory seperately
* 80c40b6 ARM: dts: vfxxx: Reintroduce the OCRAM nodes
* cd89f00 Merge tag 'v4.4.21' into toradex_vf_4.4-next
* 45de59e spi: spi-fsl-dspi: Add DMA support for Vybrid
* a8f99a5 ARM: dts: vfxxx: Enable DMA for DSPI on Vybrid
* 51243ff tty: serial: fsl_lpuart: Fix parity control
* 8f2dbc3 Merge branch 'toradex_vf_4.4-rpmsg' into toradex_vf_4.4-next
|\
| * 8439c80 ARM: configs: colibri_vf: Enable remoteproc and rpmsg for Vybrid
| * 764bf1b ARM: dts: vf610: Enable rpmsg driver for Vybrid
| * 5feabad rpmsg: vf610_rpmsg: Add rpmsg driver for Vybrid
| * 7b3be87 rpmsg: imx_rpmsg: Add rpmsg examples
| * ce28cb8 ARM: dts: vf610: Add device tree node for semaphore module on Vybrid
| * a52aca8 char: vf610_sema4: Add support for semaphore module on Vybrid
| * 41d0195 ARM: dts: vfxxx: Allow CCM to be accessed using syscon
| * f5fcfa3 ARM: dts: vf610: Add device tree node for Vybrid remoteproc driver
| * 8b08f5f remoteproc: vf610_cm4_rproc: Add remoteproc support for Vybrid
| * 43c2041 remoteproc: Support ELF loading without resource table
| * fdbb13c ARM: dts: vfxxx: Add CPU2CPU interrupts for MSCM module
| * 91294be irqchip: vf610-mscm-ir: Extend MSCM with CPU2CPU interrupt support
|/
* e11f8ba ARM: dts: vf-colibri: use Toradex evalspi
* 503ad82 spi: spidev: invent a new hw device to work around spidev warning
* 65e1bdf Revert "spi core: Add new sysfs 'num_chipselect' file"
* db04bd4 Revert "spi: spidev: Use 'new_id' sysfs file for enabling spidev"
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
Regards,
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
More information about the meta-freescale
mailing list