[meta-freescale] imxv4l2videosrc problem with i.MX7

[Carlos Rafael Giani]

It should work fine with the ov5640. What board is this?


On 2016-11-03 13:14, Ari Sinisalo wrote:
>
> I have tried to use imxv4l2videosrc but it fails constantly. Following 
> is what I get with fakesink.
>
> GST_DEBUG=2,*imx*:9 gst-launch-1.0 imxv4l2videosrc device=/dev/video1 
> ! fakesink
>
> 0:00:00.068249500   557   0xb37a20 INFO        imxv4l2videosrc 
> v4l2src.c:595:gst_imx_v4l2src_get_caps:<imxv4l2videosrc0> get caps 
> filter (NULL)
>
> 0:00:00.068449500   557   0xb37a20 INFO         imxv4l2videosrc 
> v4l2src.c:605:gst_imx_v4l2src_get_caps:<imxv4l2videosrc0> get caps 
> video/x-raw, width=(int)[ 16, 2147483647 ], height=(int)[ 16, 
> 2147483647 ], interlace-mode=(string)progressive, 
> framerate=(fraction)[ 0/1, 100/1 ], pixel-aspect-ratio=(fraction)[ 
> 0/1, 100/1 ]
>
> 0:00:00.068673500   557   0xb37a20 INFO         imxv4l2videosrc 
> v4l2src.c:595:gst_imx_v4l2src_get_caps:<imxv4l2videosrc0> get caps 
> filter (NULL)
>
> 0:00:00.068747875   557   0xb37a20 INFO         imxv4l2videosrc 
> v4l2src.c:605:gst_imx_v4l2src_get_caps:<imxv4l2videosrc0> get caps 
> video/x-raw, width=(int)[ 16, 2147483647 ], height=(int)[ 16, 
> 2147483647 ], interlace-mode=(string)progressive, 
> framerate=(fraction)[ 0/1, 100/1 ], pixel-aspect-ratio=(fraction)[ 
> 0/1, 100/1 ]
>
> Setting pipeline to PAUSED ...
>
> 0:00:00.071060625   557   0xb37a20 LOG          imxv4l2videosrc 
> v4l2src.c:279:gst_imx_v4l2src_start:<imxv4l2videosrc0> start
>
> 0:00:00.071425250   557   0xb37a20 WARN         imxv4l2videosrc 
> v4l2src.c:123:gst_imx_v4l2src_is_tvin:<imxv4l2videosrc0> 
> VIDIOC_QUERYSTD failed: Inappropriate ioctl for device
>
> 0:00:00.071497625   557   0xb37a20 WARN         imxv4l2videosrc 
> v4l2src.c:127:gst_imx_v4l2src_is_tvin:<imxv4l2videosrc0> VIDIOC_G_STD 
> failed: Inappropriate ioctl for device
>
> 0:00:00.071557250   557   0xb37a20 DEBUG        imxv4l2videosrc 
> v4l2src.c:211:gst_imx_v4l2src_capture_setup:<imxv4l2videosrc0> 
> pixelformat = 1448695129  field = 1
>
> 0:00:00.071610625   557   0xb37a20 INFO         imxv4l2videosrc 
> v4l2src.c:225:gst_imx_v4l2src_capture_setup:<imxv4l2videosrc0> capture 
> mode 0: 640x480
>
> 0:00:00.071665750   557   0xb37a20 ERROR        imxv4l2videosrc 
> v4l2src.c:230:gst_imx_v4l2src_capture_setup:<imxv4l2videosrc0> 
> VIDIOC_S_INPUT failed: Invalid argument
>
> 0:00:00.071763500   557   0xb37a20 ERROR        imxv4l2videosrc 
> v4l2src.c:284:gst_imx_v4l2src_start:<imxv4l2videosrc0> capture_setup 
> failed
>
> 0:00:00.071808000   557   0xb37a20 WARN                 basesrc 
> gstbasesrc.c:3717:gst_base_src_activate_push:<imxv4l2videosrc0> Failed 
> to start in push mode
>
> 0:00:00.071853375   557   0xb37a20 WARN                GST_PADS 
> gstpad.c:1098:gst_pad_set_active:<imxv4l2videosrc0:src> Failed to 
> activate pad
>
> ERROR: Pipeline doesn't want to pause.
>
> Setting pipeline to NULL ...
>
> Freeing pipeline ...
>
> Should imxv4l2videosrc work with i.MX7 and OV5640?
>
> I can get camera capture working with freescale plugin. These work fine:
>
>    gst-launch-1.0 imxv4l2src device=/dev/video1 ! fakesink
>
>    gst-launch-1.0 imxv4l2src device=/dev/video1 ! imxv4l2sink
>
>    gst-launch-1.0 imxv4l2src device=/dev/video1 ! imxpxpvideosink
>
> br AriS
>
>
> ------------------------------------------------------------------------
>
> SASKEN BUSINESS DISCLAIMER: This message may contain confidential, 
> proprietary or legally privileged information. In case you are not the 
> original intended Recipient of the message, you must not, directly or 
> indirectly, use, disclose, distribute, print, or copy any part of this 
> message and you are requested to delete it and inform the sender. Any 
> views expressed in this message are those of the individual sender 
> unless otherwise stated. Nothing contained in this message shall be 
> construed as an offer or acceptance of any offer by Sasken 
> Communication Technologies Limited ("Sasken") unless sent with that 
> express intent and with due authority of Sasken. Sasken has taken 
> enough precautions to prevent the spread of viruses. However the 
> company accepts no liability for any damage caused by any virus 
> transmitted by this email.
> Read Disclaimer at http://www.sasken.com/mail-disclaimer/
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20161103/692701e0/attachment.html>