[meta-freescale] imxv4l2videosrc problem with i.MX7
Ari Sinisalo
ari.sinisalo at sasken.com
Thu Nov 3 05:14:11 PDT 2016
I have tried to use imxv4l2videosrc but it fails constantly. Following is what I get with fakesink.
GST_DEBUG=2,*imx*:9 gst-launch-1.0 imxv4l2videosrc device=/dev/video1 ! fakesink
0:00:00.068249500 557 0xb37a20 INFO imxv4l2videosrc v4l2src.c:595:gst_imx_v4l2src_get_caps:<imxv4l2videosrc0> get caps filter (NULL)
0:00:00.068449500 557 0xb37a20 INFO imxv4l2videosrc v4l2src.c:605:gst_imx_v4l2src_get_caps:<imxv4l2videosrc0> get caps video/x-raw, width=(int)[ 16, 2147483647 ], height=(int)[ 16, 2147483647 ], interlace-mode=(string)progressive, framerate=(fraction)[ 0/1, 100/1 ], pixel-aspect-ratio=(fraction)[ 0/1, 100/1 ]
0:00:00.068673500 557 0xb37a20 INFO imxv4l2videosrc v4l2src.c:595:gst_imx_v4l2src_get_caps:<imxv4l2videosrc0> get caps filter (NULL)
0:00:00.068747875 557 0xb37a20 INFO imxv4l2videosrc v4l2src.c:605:gst_imx_v4l2src_get_caps:<imxv4l2videosrc0> get caps video/x-raw, width=(int)[ 16, 2147483647 ], height=(int)[ 16, 2147483647 ], interlace-mode=(string)progressive, framerate=(fraction)[ 0/1, 100/1 ], pixel-aspect-ratio=(fraction)[ 0/1, 100/1 ]
Setting pipeline to PAUSED ...
0:00:00.071060625 557 0xb37a20 LOG imxv4l2videosrc v4l2src.c:279:gst_imx_v4l2src_start:<imxv4l2videosrc0> start
0:00:00.071425250 557 0xb37a20 WARN imxv4l2videosrc v4l2src.c:123:gst_imx_v4l2src_is_tvin:<imxv4l2videosrc0> VIDIOC_QUERYSTD failed: Inappropriate ioctl for device
0:00:00.071497625 557 0xb37a20 WARN imxv4l2videosrc v4l2src.c:127:gst_imx_v4l2src_is_tvin:<imxv4l2videosrc0> VIDIOC_G_STD failed: Inappropriate ioctl for device
0:00:00.071557250 557 0xb37a20 DEBUG imxv4l2videosrc v4l2src.c:211:gst_imx_v4l2src_capture_setup:<imxv4l2videosrc0> pixelformat = 1448695129 field = 1
0:00:00.071610625 557 0xb37a20 INFO imxv4l2videosrc v4l2src.c:225:gst_imx_v4l2src_capture_setup:<imxv4l2videosrc0> capture mode 0: 640x480
0:00:00.071665750 557 0xb37a20 ERROR imxv4l2videosrc v4l2src.c:230:gst_imx_v4l2src_capture_setup:<imxv4l2videosrc0> VIDIOC_S_INPUT failed: Invalid argument
0:00:00.071763500 557 0xb37a20 ERROR imxv4l2videosrc v4l2src.c:284:gst_imx_v4l2src_start:<imxv4l2videosrc0> capture_setup failed
0:00:00.071808000 557 0xb37a20 WARN basesrc gstbasesrc.c:3717:gst_base_src_activate_push:<imxv4l2videosrc0> Failed to start in push mode
0:00:00.071853375 557 0xb37a20 WARN GST_PADS gstpad.c:1098:gst_pad_set_active:<imxv4l2videosrc0:src> Failed to activate pad
ERROR: Pipeline doesn't want to pause.
Setting pipeline to NULL ...
Freeing pipeline ...
Should imxv4l2videosrc work with i.MX7 and OV5640?
I can get camera capture working with freescale plugin. These work fine:
gst-launch-1.0 imxv4l2src device=/dev/video1 ! fakesink
gst-launch-1.0 imxv4l2src device=/dev/video1 ! imxv4l2sink
gst-launch-1.0 imxv4l2src device=/dev/video1 ! imxpxpvideosink
br AriS
________________________________
SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email.
Read Disclaimer at http://www.sasken.com/mail-disclaimer/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20161103/941d5b2c/attachment.html>
More information about the meta-freescale
mailing list