[meta-freescale] Freescale meta-freescale announcement of new layer
Robert E. Cochran
yocto at mindchasers.com
Wed Mar 16 11:10:26 PDT 2016
On 03/10/2016 11:37 PM, Zhenhua Luo wrote:
> Bob,
>
> The fixes in meta-fsl-ppc will be ported to meta-freescale, 4 patches ported from meta-fsl-ppc were submitted for meta-freescale layer.
Hi Zhenhau,
It looks like the qemu-qoriq patches in github's meta-freescale repo are
causing some problems for me.
If I do a "bitbake qemu" from a clean build environment, it subsequently
fails during the compile task of gobjects-introspection.
During the compiling of gobjects-introspection, the
g-ir-scanner-qemuwrapper script is run which fails when it tries to
execute "PSEUDO_UNLOAD=1 qemu-ppc64 ...".
"""
/build/yocto/build_meta_freescale/tmp/work/ppc64e5500-poky-linux/gobject-introspection/1.46.0-r0/build/g-ir-scanner-qemuwrapper:
line 6: qemu-ppc64: command not found
"""
Maybe you already have a patch for this? Let me know if you require
further information, and I'll start a new thread. I'll also look into
creating the patch.
Thanks
Bob
>
> http://patchwork.openembedded.org/project/meta-freescale/list/?submitter=1911
>
>
> Best Regards,
>
> Zhenhua
>
>> -----Original Message-----
>> From: Robert E. Cochran [mailto:yocto at mindchasers.com]
>> Sent: Friday, March 11, 2016 11:58 AM
>> To: Otavio Salvador <otavio.salvador at ossystems.com.br>
>> Cc: Zhenhua Luo <zhenhua.luo at nxp.com>; Lauren Post
>> <Lauren.Post at freescale.com>; meta-freescale at yoctoproject.org
>> Subject: Re: [meta-freescale] Freescale meta-freescale announcement of new
>> layer
>>
>> On 03/10/2016 11:27 AM, Otavio Salvador wrote:
>>> Hello Robert,
>>>
>>> On Thu, Mar 10, 2016 at 12:00 PM, Robert E. Cochran
>>> <yocto at mindchasers.com> wrote:
>>> ...
>>>> Thank you for the reply. Where will the meta-freescale layer / repo be
>>>> located? I would like to see one created on yoctoproject.org with a master
>>>> branch. Currently the meta-freescale layer on freescale.com doesn't have
>> a
>>>> master branch.
>>>>
>>>> I ask that either you or someone else inside NXP sends out an
>>>> announcement when this switch officially takes place.
>>> For now, it is available on Github with a master branch. Patches for
>>> it are handled using meta-freescale as usual.
>> Thank you for the reply Otavio. I had been using the GitHub meta-freescale,
>> but I think it has fallen behind.
>>
>> As an example, meta-fsl-ppc has commit 2e9b383ccaf4 that patches
>> qoriq_build_64bit_kernel.bbclass and u-boot-qoriq_2015.01.bb. However,
>> neither this commit nor the patched-up files can be found in Github's
>> meta-freescale. Therefore, I went back to using meta-fsl-ppc for
>> building Power QorIQ images.
>>
>> Please let me know if you'll be updating meta-freescale to bring it up to date
>> for ppc QorIQ, or let me know if I'm mistaken about this.
>>
>> Thanks again,
>>
>> Bob
>>
>>> In not so distant future we intend to move include the repository on
>>> Yocto Project git server however it is not yet ready for it.
>>>
More information about the meta-freescale
mailing list