[meta-freescale] migrating udoo u-boot to custum board fails in SPL

[Christian Ege]

Am 15. Juni 2016 5:16:35 nachm. schrieb Markus Haege <haemarkus at gmail.com>:

Hi,

> Hello there,
>
> the whole week i try to migrate from an udoo u-boot branch 2015 (which
> works) to yocto krogoth

I have  no issues with UDOO and krogoth I am using the UDOO u-boot with SPL 
in my meta-udoo layer.

> u-boot for Freescale imx6. Adjustments where already made in yocto fido and
> the last step of migration fails in
> SPL. Try to boot from MMC ist the only and last message of SPL.

>From the topic you try to get a custom board up and running. Isn't it?

Have you checked dram settings?
Again checked DRAM settings?

There are patches to upload u-boot to SPL via serial line. So you can try 
to load stuff to dram.

Another option is a HW debugger like the abatron bdi or peedi or a segger.


> Are there any patches around or have others the same problems?

I had ported mainline u-boot to seco  A62 a while ago had no issues except 
dram settings.
>
> I put lots of debugging messages and somehow it stops at find mmc. may
> function for init_mmc in the board directory in board.c is not
> executed.
>
> Unfortunately I'm at home and can't send any bash-outputs.
>
> Any ideas? Thanks
>
> Markus
Regards,
Christian
>
>
>
> ----------
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>