[meta-freescale] [meta-fsl-arm] Can't build manufacturing tool for imx6ulevk

[Gary Thomas]

On 2016-04-14 14:41, Otavio Salvador wrote:
> On Thu, Apr 14, 2016 at 6:25 AM, Gary Thomas <gary at mlbassoc.com> wrote:
>> Seems to be some confusion over the U-Boot style - the manufacturing
>> tool recipe is expecting a split SPL+.img but the target builds a .imx
>>
>> | cp: cannot stat
>> '/local/imx6ul_2016-02-22/tmp/work/imx6ulevk-amltd-linux-gnueabi/u-boot-imx-mfgtool/2015.04-r0/git/mx6ul_14x14_evk_config/u-boot.img':
>> No such file or directory
>> | WARNING: exit code 1 from a shell command.
>> | ERROR: Function failed: do_compile (log file is located at
>> /local/imx6ul_2016-02-22/tmp/work/imx6ulevk-amltd-linux-gnueabi/u-boot-imx-mfgtool/2015.04-r0/temp/log.do_compile.1707)
>> ERROR: Task 133
>> (/local/poky-cutting-edge/meta-fsl-arm/recipes-bsp/u-boot/u-boot-imx-mfgtool_2015.04.bb,
>> do_compile) failed with exit code '1'
>>
>> Built with a recent master
>> meta              = "master:778121ab844af623a215430ba579a5fb3947928b"
>> meta-fsl-arm      = "master:cec4c47e33979631e85e2c933cea5182da61ad82"
>>
>> Any ideas how I can get the manufacturing tool built for this target?
>
> Ideally you could send the mfgtool support for the U-Boot mainline;
> the NXP fork is not used by the board by default, even though it is
> available, so you need to adapt the board file to not use SPL.
>

I'm just trying to use the "off the shelf" [i.e. meta-fsl-arm] stuff.
I didn't expect to have to work so hard to get something in master
to be able to build :-(

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------