[meta-freescale] [meta-fsl-arm] Can't build manufacturing tool for imx6ulevk

[Otavio Salvador]

On Thu, Apr 14, 2016 at 6:25 AM, Gary Thomas <gary at mlbassoc.com> wrote:
> Seems to be some confusion over the U-Boot style - the manufacturing
> tool recipe is expecting a split SPL+.img but the target builds a .imx
>
> | cp: cannot stat
> '/local/imx6ul_2016-02-22/tmp/work/imx6ulevk-amltd-linux-gnueabi/u-boot-imx-mfgtool/2015.04-r0/git/mx6ul_14x14_evk_config/u-boot.img':
> No such file or directory
> | WARNING: exit code 1 from a shell command.
> | ERROR: Function failed: do_compile (log file is located at
> /local/imx6ul_2016-02-22/tmp/work/imx6ulevk-amltd-linux-gnueabi/u-boot-imx-mfgtool/2015.04-r0/temp/log.do_compile.1707)
> ERROR: Task 133
> (/local/poky-cutting-edge/meta-fsl-arm/recipes-bsp/u-boot/u-boot-imx-mfgtool_2015.04.bb,
> do_compile) failed with exit code '1'
>
> Built with a recent master
> meta              = "master:778121ab844af623a215430ba579a5fb3947928b"
> meta-fsl-arm      = "master:cec4c47e33979631e85e2c933cea5182da61ad82"
>
> Any ideas how I can get the manufacturing tool built for this target?

Ideally you could send the mfgtool support for the U-Boot mainline;
the NXP fork is not used by the board by default, even though it is
available, so you need to adapt the board file to not use SPL.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750