[meta-freescale] [meta-fsl-arm-extra] nitrogen6x: ov5642 support in master/jethro broken

[Ian Coolidge]

Hello Carlos,

What kernel are you running? If it's the new 3.14.28 kernel you'll need to
upgrade your u-boot version to our 2015.07 u-boot. I've written a blogpost
about it here:
https://boundarydevices.com/compiling-latest-u-boot-for-i-mx6-2015-edition/.

If you want to keep your old u-boot version, or want an image that works
for the old u-boot, we have images on this blogpost that will work and have
been tested against that hardware:
https://boundarydevices.com/fido-release-of-yocto/

Thanks,
-Ian Coolidge

On Mon, Nov 9, 2015 at 2:29 PM, Otavio Salvador <
otavio.salvador at ossystems.com.br> wrote:

> Hello Carlos,
>
> On Mon, Nov 9, 2015 at 7:25 PM, Carlos Rafael Giani
> <dv at pseudoterminal.org> wrote:
> > I tried to use the nitrogen6x' camera, and saw that no ov5642 hardware
> was
> > detected. The kernel module was loaded.
> > With the fido kernel and the exact same hardware, it works just fine.
> > Is this a known issue?
>
> Added Boundary's fellows on Cc.
>
> --
> Otavio Salvador                             O.S. Systems
> http://www.ossystems.com.br        http://code.ossystems.com.br
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20151110/f819280c/attachment.html>