[meta-freescale] imxipuvideosink in 3.10.53 on Nitrogex6xlite

[Carlos Rafael Giani]

What happens if you run this?

gst-launch-1.0 videotestsrc ! imxipuvideosink


Am 2015-05-18 um 07:34 schrieb Paweł Żabiełowicz:
> Hi all,
>
> I'm having some problems running video playback on Nitrogen6x-Lite. 
> I'm using fido with 3.10.53 kernel. Display is running properly as I 
> see a console after start, but starting any simple video with 
> Gstreamer1.0 + gstreamer-imx plugins does not give any video output, 
> even though the decoding looks like it's working.
>
> Gstreamer log:
> gst-launch-1.0 rtspsrc location=rtsp://watch:watch13579 
> 192.168.7.24:554/profile3/media.smp ! rtph264depay ! imxvpudec ! 
> imxipuvideosink
> [INFO]    Product Info: i.MX6Q/D/S
> Pipeline is live and does not need PREROLL ...
> Progress: (open) Opening Stream
> Progress: (connect) Connecting to 
> rtsp://192.168.7.24:554/profile3/media.smp
> Progress: (open) Retrieving server options
> Progress: (open) Retrieving media info
> Progress: (request) SETUP stream 0
> Progress: (request) SETUP stream 1
> Progress: (open) Opened Stream
> Setting pipeline to PLAYING ...
> New clock: GstSystemClock
> Progress: (request) Sending PLAY request
> Progress: (request) Sending PLAY request
> Progress: (request) Sent PLAY request
> ^Chandling interrupt.
> Interrupt: Stopping pipeline ...
> Execution ended after 0:00:15.125067669
> Setting pipeline to PAUSED ...
> Setting pipeline to READY ...
> Setting pipeline to NULL ...
> Freeing pipeline ...
>
> Plugins installed:
>
> gst-inspect-1.0 | grep imx
> imxipu:  imxipuvideotransform: Freescale IPU video transform
> imxipu:  imxipuvideosink: Freescale IPU video sink
> imxvpu:  imxvpudec: Freescale VPU video decoder
> imxvpu:  imxvpuenc_h263: Freescale VPU h.263 video encoder
> imxvpu:  imxvpuenc_h264: Freescale VPU h.264 video encoder
> imxvpu:  imxvpuenc_mpeg4: Freescale VPU MPEG-4 video encoder
> imxvpu:  imxvpuenc_mjpeg: Freescale VPU motion JPEG video encoder
> imxg2d:  imxg2dvideosink: Freescale G2D video sink
> imxg2d:  imxg2dvideotransform: Freescale G2D video transform
> imxaudio:  imxuniaudiodec: Freescale i.MX uniaudio decoder
> imxv4l2src:  imxv4l2src: V4L2 CSI Video Source
> imxpxp:  imxpxpvideosink: Freescale PxP video sink
> imxpxp:  imxpxpvideotransform: Freescale PxP video transform
> imxeglvivsink:  imxeglvivsink: Freescale EGL video sink
>
> While using imxeglvivsink I'm seeing red flash for few milliseconds 
> over the console and that's it.
> Any advices will be helpful.
>
> Pawel