[meta-freescale] Yocto 1.6 + QT5.3.2 on i.MX6
Dale Tyler
freescale11 at tylerent.com
Sat Jun 13 12:31:26 PDT 2015
Hi,
Thanks for the reply.
I did not communicate well. We have our own image recipe that includes
core-image-base.bb. It is similar to core-image-minimal in that it does
not include X11 or Wayland nor many other packages that are in the
larger images.
We are using dizzy primarily because the fido changes for our platform
were only released a few days ago and we want to complete our initial
work before moving to fido or QT5.4.2.
However, if it can be determined that this problem can only be fixed by
going to fido and/or QT5.4.2, then we will do so. SInce there supposedly
was a fix for this in daisy, perhaps it simply got dropped for dizzy
somehow.
Has anyone built an image similar to what we are using and fixed this issue?
Thanks,
Dale Tyler
On Fri, 12 Jun 2015 10:10:25 -0300, Daiane Angolini wrote:
>On Thu, Jun 11, 2015 at 10:27 PM, Dale Tyler
<freescale11 at tylerent.com> wrote:
>> Hi,
>>
>> We are having problems building a customized core-image-minimal
image with
>> QT5.3.2.
>
>I suggest you to create your own image. And, instead of base it off
>core-image-minimal, use core-image-base.
>
>>
>> The error we see when creating the target rootfs is
>> ERROR: qtquickcontrols not found in the base feeds (cgtqmx6
>> cortexa9hf-vfp-neon-mx6qdl cortexa9hf-vfp-neon cortexa9hf-vfp
>> armv7ahf-vfp-neon armv7ahf-vfp armv6hf-vfp armv5ehf-vfp armv5hf-vfp
noarch
>> any all).
>>
>> We cloned the GIT repo using:
>> git clone -b dizzy https://github.com/meta-qt5/meta-qt5.git
>>
>> We have included the following in local.conf:
>> PACKAGECONFIG_append_pn-qtquickcontrols = " accessibility"
>> PACKAGECONFIG_append_pn-qtbase = " accessibility"
>>
>> On May 28, 2014, there was a post to this list that talked about a
fix being
>> pushed by Octavio to master and daisy, which I would assume would
have end
>> up in the dizzy branch.
>>
>> If we leave out qtquick1 and qtquickcontrols from IMAGE_INSTALL in
our image
>> recipe, things build fine, but we need qtquickcontrols for our
application.
>>
>> Any suggestions on how to proceed would be welcome.
>
>Any special reason to stick to dizzy?
>
>>
>> Thanks,
>> Dale
>>
>>
>>
>>
>>
>>
>> --
>> _______________________________________________
>> meta-freescale mailing list
>> meta-freescale at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-freescale
>
More information about the meta-freescale
mailing list