[meta-freescale] Yocto 1.6 + QT5.3.2 on i.MX6

[Daiane Angolini]

On Thu, Jun 11, 2015 at 10:27 PM, Dale Tyler <freescale11 at tylerent.com> wrote:
> Hi,
>
> We are having problems building a customized core-image-minimal image with
> QT5.3.2.

I suggest you to create your own image. And, instead of base it off
core-image-minimal, use core-image-base.

>
> The error we see when creating the target rootfs is
> ERROR: qtquickcontrols not found in the base feeds (cgtqmx6
> cortexa9hf-vfp-neon-mx6qdl cortexa9hf-vfp-neon cortexa9hf-vfp
> armv7ahf-vfp-neon armv7ahf-vfp armv6hf-vfp armv5ehf-vfp armv5hf-vfp noarch
> any all).
>
> We cloned the GIT repo using:
> git clone -b dizzy https://github.com/meta-qt5/meta-qt5.git
>
> We have included the following in local.conf:
> PACKAGECONFIG_append_pn-qtquickcontrols = " accessibility"
> PACKAGECONFIG_append_pn-qtbase = " accessibility"
>
> On May 28, 2014, there was a post to this list that talked about a fix being
> pushed by Octavio to master and daisy, which I would assume would have end
> up in the dizzy branch.
>
> If we leave out qtquick1 and qtquickcontrols from IMAGE_INSTALL in our image
> recipe, things build fine, but we need qtquickcontrols for our application.
>
> Any suggestions on how to proceed would be welcome.

Any special reason to stick to dizzy?

>
> Thanks,
> Dale
>
>
>
>
>
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale