[meta-freescale] branch fido couldn't boot mx6q sabreSD board

[Daiane Angolini]

On Tue, Jul 28, 2015 at 10:42 PM, Wally Yeh <wally.yeh at atrustcorp.com> wrote:
>> >     The boot log, shows it got stuck on starting kernel:
>> > U-Boot 2015.04+fslc+g5d9ffd2 (Jul 27 2015 - 14:22:55)
>> >
>> > CPU:   Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz)
>> > CPU:   Automotive temperature grade (-40C to 125C) at 42C
>> > Reset cause: WDOG
>> > Board: MX6-SabreSD
>> > I2C:   ready
>> > DRAM:  1 GiB
>> > PMIC:  PFUZE100 ID=0x10
>> > MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
>> > *** Warning - bad CRC, using default environment
>> >
>> > auto-detected panel HDMI
>> > Display: HDMI (1024x768)
>>
>> Unplug HDMI cable and try again.
>>
>> After linux bootup you can connect cable again.
>>
>> Please, test it and let me know
>>
>> Daiane
>
> Thanks, it works. enter the system but get a strange resolution.
>
> use following command to recovery 1920x1080:
>  * xrandr -s 640x480
>  * echo "D:1920x1080p-60" > /sys/devices/soc0/fb.24/graphics/fb0/mode
>  * xrandr -s 1920x1080

only FYI
https://bugzilla.yoctoproject.org/show_bug.cgi?id=6703

Maybe disable HDMI splash on u-boot can be a good option to get the
right resolution "automatically" after the boot.

Make sure you have the kenrel command line to that resolution.

Daiane
>
> Wally