[meta-freescale] branch fido couldn't boot mx6q sabreSD board

[Wally Yeh]

> >     The boot log, shows it got stuck on starting kernel:
> > U-Boot 2015.04+fslc+g5d9ffd2 (Jul 27 2015 - 14:22:55)
> >
> > CPU:   Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz)
> > CPU:   Automotive temperature grade (-40C to 125C) at 42C
> > Reset cause: WDOG
> > Board: MX6-SabreSD
> > I2C:   ready
> > DRAM:  1 GiB
> > PMIC:  PFUZE100 ID=0x10
> > MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> > *** Warning - bad CRC, using default environment
> >
> > auto-detected panel HDMI
> > Display: HDMI (1024x768)
>
> Unplug HDMI cable and try again.
>
> After linux bootup you can connect cable again.
>
> Please, test it and let me know
>
> Daiane

Thanks, it works. enter the system but get a strange resolution.

use following command to recovery 1920x1080:
 * xrandr -s 640x480
 * echo "D:1920x1080p-60" > /sys/devices/soc0/fb.24/graphics/fb0/mode
 * xrandr -s 1920x1080

Wally