[meta-freescale] [meta-fsl-arm][PATCH 04/33] imx6qpsabreauto: Create i.MX 6 QuadPlus SABRE Auto machine

[Daiane Angolini]

On Sat, Jul 11, 2015 at 11:46 AM, Lauren Post <lauren.post at freescale.com> wrote:
> Create i.MX 6QuadPlus SABRE Auto Machine supporting
> ecspi, flexcan1 and gpmi-weim device trees.
>
> Signed-off-by: Lauren Post <lauren.post at freescale.com>
> ---
>  conf/machine/imx6qpsabreauto.conf |   23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 conf/machine/imx6qpsabreauto.conf
>
> diff --git a/conf/machine/imx6qpsabreauto.conf b/conf/machine/imx6qpsabreauto.conf
> new file mode 100644
> index 0000000..0c530b6
> --- /dev/null
> +++ b/conf/machine/imx6qpsabreauto.conf
> @@ -0,0 +1,23 @@
> +#@TYPE: Machine
> +#@NAME: Freescale i.MX6Q Plus SABRE Automotive
> +#@SOC: i.MX6QP
> +#@DESCRIPTION: Machine configuration for Freescale i.MX6QP SABRE Automotive
> +#@MAINTAINER: Lauren Post <lauren.post at freescale.com>
> +
> +require conf/machine/include/imx6sabreauto-common.inc
> +
> +SOC_FAMILY = "mx6:mx6q:mx6qp"
> +
> +KERNEL_DEVICETREE = "imx6qp-sabreauto.dtb imx6qp-sabreauto-ecspi.dtb imx6qp-sabreauto-flexcan1.dtb \
> +                     imx6qp-sabreauto-gpmi-weim.dtb"
> +
> +PREFERRED_PROVIDER_u-boot = "u-boot-imx"
> +PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"
> +
> +UBOOT_CONFIG ??= "sd"
> +UBOOT_CONFIG[sd] = "mx6qpsabreauto_config,sdcard"
> +UBOOT_CONFIG[eimnor] = "mx6qpsabreauto_eimnor_config"
> +UBOOT_CONFIG[nand] = "mx6qpsabreauto_nand_config,ubifs"
> +UBOOT_CONFIG[spinor] = "mx6qpsabreauto_spinor_config"
> +UBOOT_CONFIG[sata] = "mx6qpsabreauto_sata_config"
> +UBOOT_CONFIG[mfgtool] = "mx6qpsabreauto_config"

Same comment from i.MX7 here. Would mfgtool work for imx6QP at this point?

Daiane
> --
> 1.7.9.5
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale