[meta-freescale] [meta-fsl-arm][PATCH 04/33] imx6qpsabreauto: Create i.MX 6 QuadPlus SABRE Auto machine

[Lauren Post]

Create i.MX 6QuadPlus SABRE Auto Machine supporting
ecspi, flexcan1 and gpmi-weim device trees.

Signed-off-by: Lauren Post <lauren.post at freescale.com>
---
 conf/machine/imx6qpsabreauto.conf |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 conf/machine/imx6qpsabreauto.conf

diff --git a/conf/machine/imx6qpsabreauto.conf b/conf/machine/imx6qpsabreauto.conf
new file mode 100644
index 0000000..0c530b6
--- /dev/null
+++ b/conf/machine/imx6qpsabreauto.conf
@@ -0,0 +1,23 @@
+#@TYPE: Machine
+#@NAME: Freescale i.MX6Q Plus SABRE Automotive
+#@SOC: i.MX6QP
+#@DESCRIPTION: Machine configuration for Freescale i.MX6QP SABRE Automotive
+#@MAINTAINER: Lauren Post <lauren.post at freescale.com>
+
+require conf/machine/include/imx6sabreauto-common.inc
+
+SOC_FAMILY = "mx6:mx6q:mx6qp"
+
+KERNEL_DEVICETREE = "imx6qp-sabreauto.dtb imx6qp-sabreauto-ecspi.dtb imx6qp-sabreauto-flexcan1.dtb \
+                     imx6qp-sabreauto-gpmi-weim.dtb"
+
+PREFERRED_PROVIDER_u-boot = "u-boot-imx"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-imx"
+
+UBOOT_CONFIG ??= "sd"
+UBOOT_CONFIG[sd] = "mx6qpsabreauto_config,sdcard"
+UBOOT_CONFIG[eimnor] = "mx6qpsabreauto_eimnor_config"
+UBOOT_CONFIG[nand] = "mx6qpsabreauto_nand_config,ubifs"
+UBOOT_CONFIG[spinor] = "mx6qpsabreauto_spinor_config"
+UBOOT_CONFIG[sata] = "mx6qpsabreauto_sata_config"
+UBOOT_CONFIG[mfgtool] = "mx6qpsabreauto_config"
-- 
1.7.9.5