[meta-freescale] Qt5 issue
andrea at perpic.it
andrea at perpic.it
Wed Jan 28 02:52:15 PST 2015
Hello Marco,
we are from the same town :)
I'm using Dizzy and I'm building from a Ubuntu 14.10 desktop.
Here's the output of bitbake as requested:
NOTE: Started PRServer with
DBfile: /home/andrea/FSL/build/cache/prserv.sqlite3, IP: 127.0.0.1,
PORT: 40670, PID: 18257
WARNING: Host distribution "Ubuntu-14.10" has not been validated with
this version of the build system; you may possibly experience unexpected
failures. It is recommended that you use a tested distribution.
Loading cache: 100% |
##############################################################################################################################################################################| ETA: 00:00:00
Loaded 2078 entries from dependency cache.
Parsing recipes: 100% |
############################################################################################################################################################################| Time: 00:00:00
Parsing of 1618 .bb files complete (1616 cached, 2 parsed). 2079
targets, 207 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies
NOTE: multiple providers are available for jpeg (jpeg, libjpeg-turbo)
NOTE: consider defining a PREFERRED_PROVIDER entry to match jpeg
Build Configuration:
BB_VERSION = "1.24.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-14.10"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "av_imx"
DISTRO = "poky"
DISTRO_VERSION = "1.7.1"
TUNE_FEATURES = "arm armv7a vfp neon"
TARGET_FPU = "vfp-neon"
meta
meta-yocto =
"(nobranch):9fc095a439c36014c73b3a8f240afba09fe0e4d7"
meta-oe
meta-multimedia = "dizzy:200f6cafc878d4c26871fc56d21ecc8eaa9aa61b"
meta-fsl-arm =
"(nobranch):64752fbb49b16cad881a7b4d35fef3f8315a673f"
meta-fsl-arm-extra =
"(nobranch):b32528c10caac5e85f2b5efe0e5b95322dd68ace"
meta-fsl-demos =
"(nobranch):48cb0bcdd226d2e7eee1fdc222713e1dff93342c"
meta-changes = "master:c852b025f311b18d74351f7413efce91330e03fe"
meta-qt5 = "dizzy:41c5daa84af4466bfc9aa61f6f772c68470a628b"
meta-ruby
meta-multimedia = "dizzy:200f6cafc878d4c26871fc56d21ecc8eaa9aa61b"
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Tasks Summary: Attempted 3477 tasks of which 3477 didn't need to
be rerun and all succeeded.
Summary: There was 1 WARNING message shown.
meta-changes is a repo I made where there I inserted the machine av_imx,
it's a copy of IMX53QSB. And a kernel patch for changing u-boot env with
NTSC output.
Any suggestion is apreciated
best regards
Andrea
Il giorno mar, 27/01/2015 alle 18.27 +0100, Marco Cavallini ha scritto:
> Hi Andrea,
> could you please provide more details about your build?
> For example which Yocto version are you using (the log msg shown
> launching bitbake)?
>
> Ciao
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Marco Cavallini | KOAN sas | Bergamo - Italia
> embedded and real-time software engineering
> Phone:+39-035-255.235 - Fax:+39-178-22.39.748
> http://www.KoanSoftware.com
> Upcoming Yocto training: http://goo.gl/0iHGDL
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> 2015-01-26 16:11 GMT+01:00 <andrea at perpic.it>:
> > Hello again,
> >
> > at the end I was able to correctly compile qt5. I just changed the
> > branch in the bb file to reflect the change in the master branch as
> > suggested in the topic I linked before.
> >
> > Actually I am facing the fact that usign eglfs I have a corrupted screen
> > on the tve module of the micro. My setup is:
> > NTSC framebuffer: Working, I can use df_andi and other directfb demo, I
> > can see the character terminal.
> > If I start some program like qglinfo --platform eglfs I have a corrupted
> > screen, the images are all wrong. If I leave enable the cursor blinking
> > it appear correct and I can type characters and I can see them during
> > the demo, so I think that just the graphic part of the buffer is screwed
> > up. The same happen if I use the program simple_draw.
> >
> > I made the same tests disabling the NTSC output and re-enabling the VGA
> > output and everything work as expected.
> >
> > Any hints on where I need to stick my hands for have the graphics
> > programs working at NTSC framerate and not at VGA?
> > Thank you for reading
> >
> > Andrea
> >
> > Il giorno ven, 23/01/2015 alle 14.45 +0100, Andrea ha scritto:
> >> Hello Gianluca,
> >>
> >> thank you for your reply.
> >> yes, I have DISTRO_FEATURES_remove = "x11 wayland" in my local.conf.
> >>
> >> I found on the freescale website some guide, all for IMX6 and I'm trying
> >> to get the same result on a IMX53.
> >> for reference like:
> >> https://community.freescale.com/docs/DOC-100419
> >> https://community.freescale.com/docs/DOC-101118
> >>
> >> the only problem is that I'm stuck with the same error reported in the
> >> link in my previous mail.
> >>
> >> best regards
> >> Andrea
> >>
> >> Il giorno ven, 23/01/2015 alle 14.20 +0100, Gianluca Cinci ha scritto:
> >> > Hi Andrea,
> >> > are you building image with X11 ?
> >> >
> >> > Have you try to disable it with :
> >> >
> >> > DISTRO_FEATURES_remove = "x11 wayland"
> >> >
> >> > in your local.conf?
> >> >
> >> > note : you can start another full compilation in another path by run (eg.)
> >> >
> >> > source ./setup-environment new-build-folder
> >> >
> >> > Best Regards
> >> > Gianluca
> >> >
> >> >
> >> > ________________________________________
> >> > Da: meta-freescale-bounces at yoctoproject.org <meta-freescale-bounces at yoctoproject.org> per conto di andrea at perpic.it <andrea at perpic.it>
> >> > Inviato: venerdì 23 gennaio 2015 14.03
> >> > A: meta-freescale at yoctoproject.org
> >> > Oggetto: [meta-freescale] Qt5 issue
> >> >
> >> > Hello,
> >> > I subscribed to the list after this mail:
> >> > https://lists.yoctoproject.org/pipermail/meta-freescale/2015-January/012383.html
> >> >
> >> > I'm trying to accomplish the same, installing Qt5 on my board. It's a
> >> > IMX53QSB.
> >> > I have the same error, if I try to switch the meta-qt5 to master it
> >> > tries to compile Qt5.4 but it exits with an error while compiling
> >> > qtbase:
> >> > ...qtbase/5.4.0-r0/qtbase-opensource-src-5.4.0/src/gui/opengl/qopengltexturehelper.cpp:173:16: error: invalid conversion from 'void (*)(GLenum, GLint, GLenum, GLsizei, GLsizei, GLint, GLenum, GLenum, const void*) {aka void (*)(unsigned int, int, unsigned int, int, int, int, unsigned int, unsigned int, const void*)}' to 'void (*)(GLenum, GLint, GLint, GLsizei, GLsizei, GLint, GLenum, GLenum, const GLvoid*) {aka void (*)(unsigned int, int, int, int, int, int, unsigned int, unsigned int, const void*)}' [-fpermissive]
> >> > | TexImage2D = ::glTexImage2D;
> >> > | ^
> >> >
> >> > I don't think that putting meta-qt5 to master is a big idea but I don't
> >> > know how to face to the first problem. Can someone give me some hint?
> >> >
> >> > Thank you
> >> > Andrea
> >> > --
> >> > _______________________________________________
> >> > meta-freescale mailing list
> >> > meta-freescale at yoctoproject.org
> >> > https://lists.yoctoproject.org/listinfo/meta-freescale
> >>
> >
> > --
> >
> > Andrea Innocenti
> > Research & Innovation Dept.
> >
> > PER.PIC. TECHNIK KABEL s.r.l.
> > Via Don Gnocchi, 11
> > 24030 Presezzo (BG) – ITALY
> > C.F.-P.IVA: IT 02032500163
> >
> > Phone: +(39) 035 461770
> > Fax: +(39) 035 460359
> > Web: www.perpic.it
> > Email: :andrea at perpic.it
> >
> > P Please consider the environment before printing this email.
> >
> >
> >
> >
> >
> >
> >
> >
> > --
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-freescale
--
Andrea Innocenti
Research & Innovation Dept.
PER.PIC. TECHNIK KABEL s.r.l.
Via Don Gnocchi, 11
24030 Presezzo (BG) – ITALY
C.F.-P.IVA: IT 02032500163
Phone: +(39) 035 461770
Fax: +(39) 035 460359
Web: www.perpic.it
Email: :andrea at perpic.it
P Please consider the environment before printing this email.
More information about the meta-freescale
mailing list