[meta-freescale] Bitbake error: u-boot-fslc

[Daniel C. A (NESTIT)]

Dear Daiane,

	For your following question, 
	>From u-boot perspective, you're trying to build for mx6qsabreauto, I think 2014.01 does not support imx6Q-Sabre Auto, can you, please, double check?

	U-boot version 2014.01 is working on imx6Q-Sabre Auto, since I used the same before. I got the same error continuously whenever I try to bitbake -c compile u-boot-fslc -f. Only changes I made are, 
1. Changed machine name as aic_target (but I included its conf file as said before).
2. In local.conf I gave, INHERIT = "externalsrc" , and provided externalsrc path also there. (when I bitbake disabling externalsrc, no error is found).

Awaiting your reply,
Daniel


-----Original Message-----
From: meta-freescale-bounces at yoctoproject.org [mailto:meta-freescale-bounces at yoctoproject.org] On Behalf Of Daniel C. A (NESTIT)
Sent: Friday, January 23, 2015 4:53 PM
To: Daiane Angolini
Cc: meta-freescale at yoctoproject.org; Freescale Support
Subject: Re: [meta-freescale] Bitbake error: u-boot-fslc

Okay.Thanks for the support. :)

Daniel

-----Original Message-----
From: angolini at gmail.com [mailto:angolini at gmail.com] On Behalf Of Daiane Angolini
Sent: Friday, January 23, 2015 4:34 PM
To: Daniel C. A (NESTIT)
Cc: meta-freescale at yoctoproject.org; Freescale Support
Subject: Re: [meta-freescale] Bitbake error: u-boot-fslc

On Fri, Jan 23, 2015 at 4:41 AM, Daniel C. A (NESTIT)
<daniel.ca at nestgroup.net> wrote:

I removed anything else from your log, because I want to highlitgh
what I can read from it


> NATIVELSBSTRING   = "Ubuntu-12.04"

You are using Ubuntu 12.04
http://www.yoctoproject.org/docs/1.6/ref-manual/ref-manual.html#detailed-supported-distros

supported distro


> DISTRO_VERSION    = "1.6.2"

it´s daisy, not dizzy


> ERROR: Function failed: do_compile (log file is located at
> /home/daniel/aic/fsl-community-bsp_target_builder/sources/poky/build_target/tmp/work/aic_target-poky-linux-gnueabi/u-boot-fslc/v2014.01-r6/temp/log.do_compile.6040)

the u-boot version is 2014.01

> | make: *** No rule to make target `mx6qsabreauto_config'.  Stop.


From u-boot perspective, you're trying to build for mx6qsabreauto, I
think 2014.01 does not support imx6Q-Sabre Auto, can you, please,
double check?



> Note:
>
> 1.       aic_target is my customized MACHINE name and I have included its
> conf file.

I think the first thing is to ajust the u-boot version to one with
proper board support.

I would also recommend to use dizzy, instead of daisy


Daiane
-- 
_______________________________________________
meta-freescale mailing list
meta-freescale at yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale