[meta-freescale] imx6 silent memory corruption

[Eric Bénard]

Hi Nikolay,

Le Tue, 27 Jan 2015 22:23:15 +0200,
Nikolay Dimitrov <picmaster at mail.bg> a écrit :
> On 01/27/2015 07:40 PM, Gonzalez, Alex wrote:
> > Nikolay,
> >
> > Assuming this is a custom board, if you are using different memory or with a different configuration from the reference designs, you may need to change the memory calibration to suit the hardware. Freescale support can provide an application note that explains how to perform the calibration over a representative sample of boards.
> 
> Yes, this is a custom board. I've already did the DDR3 calibration for
> this design and validated it with 48h testing with the Freescale DDR
> stress test tool (available on the IMX Community site).
> 
are you sure of the stability of your power supplies under loard (not
only the memories' one) ?

best regards
Eric