[meta-freescale] imx6 silent memory corruption

[Nikolay Dimitrov]

Hi Alex,

On 01/27/2015 07:40 PM, Gonzalez, Alex wrote:
> Nikolay,
>
> Assuming this is a custom board, if you are using different memory or with a different configuration from the reference designs, you may need to change the memory calibration to suit the hardware. Freescale support can provide an application note that explains how to perform the calibration over a representative sample of boards.

Yes, this is a custom board. I've already did the DDR3 calibration for
this design and validated it with 48h testing with the Freescale DDR
stress test tool (available on the IMX Community site).

Kind regards,
Nikolay