[meta-freescale] Trouble with i.mx28evk

[Mark Lane]

I have attached the output from minicom for the boot. It's complaining that
the 'card never left busy state'. I just recopied the image to the flash
drive so maybe I didn't properly unmount it because that is new. Before it
would just get to 'waiting for root device' and just sit there.

On Wed, Feb 11, 2015 at 7:06 AM, Fabio Estevam <festevam at gmail.com> wrote:

> Hi Mark,
>
> On Wed, Feb 11, 2015 at 9:41 AM, Mark Lane <mark at 2100computerlane.net>
> wrote:
> >
> > I cannot seem to get a usable build using Yocto with either fslc-linux or
> > imx-linux. I can build a bootable kernel with imx-linux but USB is not
> > working. With fslc-linux (3.18), u-boot can load the kernel but the
> kernel
> > can't mount the ext3 file system.
>
> Could you share the whole log from U-boot until the point where the
> kernel does not find the rootfs when using the 3.18 kernel?
>
> Regards,
>
> Fabio Estevam
>



-- 
Mark Lane
Linux Systems Integrator
http://www.2100computerlane.net
1-844-723-8112 * 1-289-448-5113
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20150211/c8adb343/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: minicom2.out
Type: application/octet-stream
Size: 11147 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20150211/c8adb343/attachment.obj>