[meta-freescale] Updates to meta-fsl-arm (master and dizzy) in 2014-10-27

[Otavio Salvador]

Hello,

I pushed following updates:

commit fc5c5ec5304cb3bedaf07ab0c7f3044d08251488 (HEAD, yocto/master-next, yocto/master, code/master-next, pending)
Author: Otavio Salvador <otavio at ossystems.com.br>
Date:   Thu Oct 23 20:34:23 2014 -0200

    imx6dlsabreauto: Change to use u-boot-fslc
    
    This board is now supported by u-boot-fslc so we move from u-boot-imx
    to it; this is preferred as this U-Boot fork follows closely the
    mainline tree which brings faster development cycle and helps to
    extend the test of i.MX6 support.
    
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

commit 1621191e108c046ec3dd2612f6e5df25f61f23f4
Author: Otavio Salvador <otavio at ossystems.com.br>
Date:   Fri Oct 10 19:18:10 2014 -0300

    u-boot-fslc: Update to 2014.10 upcoming release
    
    This updates the U-Boot to the 2014.10 based branch. On top of the
    original code we still have following changes applied:
    
    75ce95e embestmx6boards: Change default bootenv configuration
    472bfb3 ot1200: add sata support
    4e8b5ee ot1200: fix sf detection
    857ccfd ARM: i.MX6: include prototype for get_board_rev()
    2b542e6 video: ipu_disp: remove pixclk fixup
    499a8ca video: ipu: fix debug and comment
    c970aa2 lcd: Fix build error with CONFIG_LCD_BMP_RLE8
    37a6b36 mx6sabre_common: Add HDMI config to common code
    56f29bf mx6qsabreauto: Add HDMI support
    2878ac3 ot1200: remove superfluous "string" tag
    d2104d6 ARM: i.MX video: declare displays and display_count publicly
    2d6e2ec ARM: i.MX: provide declaration for board_spi_cs_gpio
    d09ced3 ARM: prevent compiler warnings from bootm.c
    34fd658 wandboard: Use 32bit color depth for Fusion LCD
    92e4fa9 mx6sabresd: Use LDO dtb file until LDO bypass support is added
    d859ee7 mx6slevk: Use LDO dtb file until LDO bypass support is added
    47ac5b6 mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT
    
    Due the changes on the way U-Boot works now, heavily relying on
    kconfig, it is required to use the 'configure' step to properly setup
    it for the 'sandbox' before building the tools.
    
    Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>

Regards,

--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750